See what our Experts say about this Dexter Trailer Bearings Races Seals Caps

• What Replacement Bearings Do I Need for a 4,400 lbs Dexter 248744 Axle?
  Hi Bill! The snap ring style bearing setups have been phased out, so there is not a kit with that replacement included, but we do have Replacement Outer Snap Ring for 35mm, 42mm, and 50mm Dexter Nev-R-Lube Bearings # 69-96 which is confirmed for axles between 3,500 lbs, to 8,000 lbs, which makes your 4,400 lbs. #248744 axle a perfect fit. Your Dexter 4,400lb axles under your 2017 Keystone Cougar X-Lite trailer will use the following parts, which are all a perfect fit to work with your...
  view full answer...
• Recommended Bearing Kit for a Dexter 4,400 lbs Axle
  Yes, it is Doug! The Dexter Bearing Kit for 4.4K Axles item # DX86ER is exactly what you'll need for your Dexter Nev R lube 4,400 lbs axles. This kit includes all the bearings, races, seal, tang washer, and cotter pin you would need. The kit is sold per hub. How long are you staying up in Alaska? You can add this information, along with any other questions you have, where it says Add Comment.
  view full answer...
• Replacement Bearing Kit for a 2022 Grand Design Transcend Xplor 265BH
  Hey Jason, thanks for reaching out! Your 2022 Grand Design Transcend Xplor 265BH either has 3,500 lb axles or 4,400 lb axles. Both are listed out on the Grand Design website so you'll just need to check out the tags in the middle of your axles to verify which weight rating you have. For 3,500 lb axles use the Timken Bearing Kit # TMK52VR, and for 4,400 lb axles use the Dexter Bearing Kit # DX86ER. What weight rating do you have listed on your axles?
  view full answer...
• Replacement Seal and Bearing Kit for a Dexter 4,400 lbs Axle
  Hey Don. The correct grease seal for a Dexter 4,400 lbs axle is item # 58846. It has a 1.719" inner diameter and 2.565" outer diameter. To replace all the bearings, races, seal, tang washer, and cotter pin you'll need the Dexter Bearing Kit for 4.4K Axles item # DX86ER. You'll need one kit per hub. What kind of trailer do you have? You can add this information, along with any other questions you have, where it says Reply to Jerred H.
  view full answer...
• Replacement Bearing Kit for a 4400lbs Axle on a
  Hey Rick, I’m happy to help. Based on your trailer having 4,400 lb Dexter axles, the bearing kit # DX86ER is what you would need for your trailer. This is the only bearing kit available for a 4,400 lb Dexter axle. What kind of trip are you prepping the trailer for?
  view full answer...
• Replacement Bearing Kit for Dexter 4,400 lbs Axles
  Hey Brandon, thanks for the information! You are correct. The Dexter Bearing Kit item # DX86ER is exactly what you'll need if your Keystone Cougar has Dexter 4,400 lbs axles. This kit is designed to replace one hubs worth of bearings, races, seal, tang washer, and even comes with a replacement cotter pin. Please note that the Dexter Bearing Kit item # DX86ER will only be the correct one if you have Dexter 4,400 lbs axles. I highly recommend verifying if you haven't already that yours is...
  view full answer...
• What are the Correct Bearings, Races, and Seals for 4,400 Pound Axle?
  Hello Tony, I really wish I had a database that tells me exactly what goes on each camper, but unfortunately, I don’t. Based on my research, you should have a 4,400-pound axle (you can double-check your axle tag to confirm). If it is NOT a Lippert axle you will need: Grease seal - RG06-050 Inner Bearing L68149 Outer Bearing LM67048 Race Lm67010 Race L68111 We have a kit that includes everything you’ll need: Dexter Bearing Kit for 4.4K Axles – Inner and Outer Bearings LM67048/L68149...
  view full answer...
• Correct Bearing Kit for 2024 Winnebago 2326RB
  Hey Allen! That is an error on our site under the Dexter Bearing Kit for 4.4K Axles # DX86ER. The # L68149 is strictly a bearing part number. The outer race will be the same # LM67010 listed in your photo which would make it the correct kit. Have you verified if that is correct for the spindle on your D44 axle? Some of the newer Dexter 4,400 lb axles use a hub like # DX53WR with the # L68149 for the inner and outer bearing. If you aren't sure, I went ahead and sent your serial number off...
  view full answer...
• Replacement Bearing Kit for a 4400 Lbs Dexter Axle
  Hey, Scott. We have exactly what you need. The Dexter bearing kit part # DX86ER comes with everything that you need to replace the bearings, races, and seals. This kit is a per wheel set so you will need to order 2 for one axle. What other maintenance are you getting done for your camper before camping season arrives?
  view full answer...
• Correct Bearing Kit for AL-KO 4,400 lb Axle
  Hi Mike, Thank you for your questions! I'm happy to help. I wish there were an easy way to tell you exactly which replacement bearings you need, but AL-KO 4,400 lb axles can be a bit tricky. AL-KO was known for using several different bearing combinations rather than one standard bearing pack. The Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149 # DX86ER that you asked about is designed for Dexter 4,400 lbs axles and includes an LM67048 outer bearing. However,...
  view full answer...
• What Bearing Kit do I Need for My Dexter Axle Rated for 4,400 Pounds?
  Hello Branson, Thanks so much for including the axle tag, the 4,400 pound axles are very brand specific on finding the correct kit. For your Dexter 4,400 pound axle, you will want the Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149 # DX86ER, you will need to order one kit per hub. If you do not already have some bearing grease on hand, make sure to grab some LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can # L11380. Getting...
  view full answer...
• How To Convert Mobile Home Hub To Common Trailer Hub
  Hey Mark! It's a little tricky trying to convert mobile home hubs/spindles to trailer hubs/spindles. Mobile home axles are usually one time use and don't really corelate to anything compatible on the trailer side. You do have some common bearings luckily, which means you likely have a 4,400lb axle that uses Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149 # DX86ER. While we don't have any idler hubs, you might be able to source that somewhere else and retain...
  view full answer...
• Replacement Bearings and Seals for a Dexter 4,400 lb. Axle
  Hi Luke, Thanks for your question! I'm happy to help. For your Dexter 4,400 lb axle, the correct replacement components are: Inner bearing: L68149 Outer bearing: LM67048 Grease seal: 10-19 The Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149 #DX86ER includes everything you need to service one hub assembly. In addition to the bearings and grease seal, the kit also comes with the matching bearing races and a cotter pin. Even if you don't need those extra components,...
  view full answer...
• Looking for Bearing Set for AL Ko 4.4k Trailer Axle
  Hey Daniel, we have the exact bearing kit you are wanting with the Dexter 4.4k bearing kit part # DX86ER which matches the exact bearing numbers and seal that you are in need of. Are you wanting to have a spare set on hand or did you have a bearing failure?
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?