Correct Bearing Kit for AL-KO 4,400 lb Axle
Updated 07/06/2026 | Published 06/29/2026 >
Products Featured in This Question
Question:
I an AL-KO 4400-pound axle, p/n 402268.9 on my 2015 Keystone Outback 312bh. Is the DX86ER bearing kit correct for this axle?
asked by: Mike R
Expert Reply:
Hi Mike,
Thank you for your questions! I'm happy to help.
I wish there were an easy way to tell you exactly which replacement bearings you need, but AL-KO 4,400 lb axles can be a bit tricky.
AL-KO was known for using several different bearing combinations rather than one standard bearing pack. The Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149 # DX86ER that you asked about is designed for Dexter 4,400 lbs axles and includes an LM67048 outer bearing.
However, we've also seen AL-KO 4,400 lbs axles that use the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lbs with #84 Spindle # BK2-100, which includes an L44649 outer bearing commonly found on 3,500 lbs axles.
The best way to determine the correct kit is to remove one hub and inspect the bearings. If the bearing numbers are still legible, they will be etched into the bearings themselves. There may also be a part number cast into the face of the hub that we can use to identify the correct replacement components.
If you can send me the bearing numbers or the hub part number, I'd be happy to help you find the right kit.
Once you've finished the maintenance, do you have any trips planned with your 2015 Keystone Outback?
Product Page this Question was Asked From
Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Video: Dexter Heavy-Duty Suspension Kit Installation - 2021 Coachmen Apex Ultra-Lite Travel Trailer
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Bearing and Seal Kit for Lippert 4.4k Trailer Axle
- Q&A: What Bearing Kit and Replacement Parts for My Dexter Vault do I Need for 3,500 Axle Skeeter Boat?
- Q&A: Is There Trailer Bearing Kit With Bearings L44649 & L68149
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Brakes Not Working? Troubleshooting Guide

