Replacement Bearing Kit for a 4400lbs Axle on a
Updated 03/20/2026 | Published 03/17/2026
Products Featured in This Question
Question:
I’m repacking my wheel bearings for the first time. I have a 2021 Winnebago Minnie travel trailer with double Dexter 4400lbs axles. I’m getting an assortment of conflicting part numbers for back seals and the bearing cones. I have a pic of the axle it shows a number132274976. I wanted the parts before tearing apart to get the numbers. Can you help?
asked by: Rick T
Expert Reply:
Hey Rick, I’m happy to help.
Based on your trailer having 4,400 lb Dexter axles, the bearing kit # DX86ER is what you would need for your trailer. This is the only bearing kit available for a 4,400 lb Dexter axle.
What kind of trip are you prepping the trailer for?
(click to enlarge)
Product Page this Question was Asked From
Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- 1.72 Inch I.D.
- Bearing LM67048 and L68149
- Race L68149 and L68111
- 4400 lbs Axle
- Dexter
more information >
Continue Researching
- Q&A: Replacement Bearing Kit for a 2022 Grand Design Transcend Xplor 265BH
- Q&A: What Replacement Bearings Do I Need for a 4,400 lbs Dexter 248744 Axle?
- Q&A: Recommended Bearing Kit for a Dexter 4,400 lbs Axle
- Q&A: Replacement Seal and Bearing Kit for a Dexter 4,400 lbs Axle
- Q&A: Replacement Bearing Kit for Dexter 4,400 lbs Axles
- Q&A: What are the Correct Bearings, Races, and Seals for 4,400 Pound Axle?
- Q&A: Correct Bearing Kit for 2024 Winnebago 2326RB
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: 5 Products You Need For Your Next Camping Trip (2022)
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains
Rick
3/19/2026
Yes, I too had different numbers as well. The package numbers were different from the parts. I had to return my first kit. I had to pull the old parts and get the numbers off of them first. Then I ordered my new parts.