Correct Bearing Kit for 2024 Winnebago 2326RB
Updated 12/22/2025 | Published 12/19/2025
Products Featured in This Question
Question:
I am having a little trouble finding the right wheel bearing kit for my 2024 Winnebago 2326RB. IT has Dexter D44 4400 lbs axles. When I looked on your site I found this package: https://www.etrailer.com/Trailer-Bearings-Races-Seals-Caps/Dexter/DX86ER.html The problem is that the race numbers are not the same. Can you verify that this is the correct wheel bearing package for my trailer?
asked by: Allen T
(click to enlarge)
Expert Reply:
Hey Allen! That is an error on our site under the Dexter Bearing Kit for 4.4K Axles # DX86ER. The # L68149 is strictly a bearing part number. The outer race will be the same # LM67010 listed in your photo which would make it the correct kit.
Have you verified if that is correct for the spindle on your D44 axle? Some of the newer Dexter 4,400 lb axles use a hub like # DX53WR with the # L68149 for the inner and outer bearing. If you aren't sure, I went ahead and sent your serial number off to Dexter to identify the spindle for bearing replacement. I should hear back from them in the next few days, hopefully before the holidays.
Product Page this Question was Asked From
Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- 1.72 Inch I.D.
- Bearing LM67048 and L68149
- Race L68149 and L68111
- 4400 lbs Axle
- Dexter
more information >
Continue Researching
- Q&A: What are the Correct Bearings, Races, and Seals for 4,400 Pound Axle?
- Shop: MORryde Add-A-Step for 23-1/2" Wide Step Above Treads
- Shop: MORryde Add-A-Step for 19-1/2" Wide Step Above Treads
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Brakes for 2019 Grand Design Imagine 2670MK
- Q&A: Looking For Electric Brakes And Hub/Drums For Lippert 3,500 lb Axle
- Q&A: Replacement Bearings and Seal for Dexter 4,400 lb Trailer Axle
- Q&A: Replacement 12" Brakes for a Kelsey Hayes Axles w/a 4 Bolt Mounting Flange
- Q&A: Replacement Bearing Kit for a Dexter 4,400 lbs Axle
- Q&A: Replacement Brake Shoes For Al-KO 10" X 2-1/4" Electric Brake Drums On a 2002 Forest River Flagstaff
- Article: Trailer Maintenance Schedule
- Article: Most Popular Wheel Bearings
- Article: The Best Electric Trailer Jacks of 2025
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
Robin H.
12/22/2025
I just heard back from Dexter and it uses the # L68149 inner and outer bearing with # RG06-050 (10-19) grease seals. The correct races would be # L68111 .