See what our Experts say about this Kodiak Accessories and Parts

• Will The Replacement Mounting Bracket for Kodiak Disc Brake Caliper Fit My Truck
  Hey, Lee. This bracket is designed for trailer axles and trailer brake configurations. We wouldn't recommend to use the replacement caliper bracket parts # KCMB10RD on anything else.
  view full answer...
• Can Tie Down Brackets Be Used With Kodiak 225 Calipers?
  Hello Perry, thanks for reaching out. You cannot use a Tie Down bracket with a Kodiak 225 Caliper. The calipers and brackets are brand specific and you cannot mix and match. Sometimes the differences of the brackets are very slight, but even that is enough to throw things off and cause the brakes to not work correctly. So for the Kodiak 225 calipers you will need to use the following bracket: - Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs # KCMB10RD
  view full answer...
• Replacement Brake Calipers and Mounting Brackets for Load Rite Tandem Axle Trailer with 3.5K Alxes
  Because Kodiak hasn't tested their calipers with brackets from Tie Down, they weren't able to say if they'd be compatible. We do offer the calipers and the brackets sold separately, though. The caliper is part # KDBC225KG and the bracket needed will depend on what type of rotor you have. If you have a hub/rotor, use # KCMB10HRD or # KCMB10RD if you're using a rotor that slips over an idler hub. Each part is sold individually.
  view full answer...
• Replacement Caliper Mounting Bracket for Kodiak 3,500 lb Axle Disc Brake Kit
  Hey Scott, it looks like a year ago you bought the part # K2R35DKG which the correct replacement caliper mounting bracket for that would be the part # KCMB10RD,
  view full answer...
• Replacement Caliper and Bracket for the Kodiak Disc Brake Kit item # K2R35D
  Yes we do. The calipers and brackets for the Kodiak Disc Brake Kit item # K2R35D can be purchased separately. The caliper is item # KDBC225DAC and the brackets are item # KCMB10RD. I have linked a diagram of the bracket for the Kodiak Disc Brake Kit item # K2R35D along with an installation video. We do not have one with a 2-3/8" top to bottom hole spacing or 3-1/8" side to side.
  view full answer...
  
• Why Were The Kodiak 204 Calipers and Pads Discontinued?
  I wish I had a good answer for you, but since Kodiak was bought out by Dexter it seems they discontinued the 204 caliper in favor of using the 225 calipers. They both worked on 3500lb axles but the 225 was also able to be used on larger axles up to 6000lbs. You can replace your 204 calipers with the 225 using mounting bracket # KCMB10RD if you have 3500lb axles, or # KCMB12D if you have 5200-6000lb axles. You will then need the new calipers # KDBC225DAC and pads # K225CP. I included videos...
  view full answer...
• Replacement Caliper Mounting Bracket for a CMB-10-UA Over the Hub and/or Stainless Steel Bracket
  I spoke with my contact at Kodiak. He stated that the UA code at the end of your existing caliper mounting bracket means that it is for a slip over (over the hub) or stainless steel rotor. We have 2 that fit this category, each with a different finish. Stainless, # KCMB10RS Dacromet, # KCMB10RD
  view full answer...
• Solution for Needing Replacement Caliper for Kodiak 204 Caliper
  Hey Al, I have a solution for you but we don't have anything that is a direct replacement for the Kodiak 204 caliper including the DeeMax you referenced. . Since Kodiak was bought out by Dexter it seems they discontinued the 204 caliper in favor of using the 225 calipers. They both worked on 3500lb axles but the 225 was also able to be used on larger axles up to 6000lbs. You can replace your 204 calipers with the 225 using mounting bracket # KCMB10RD if you have 3500lb axles, or # KCMB12D...
  view full answer...
• Kodiak Disc Brake Caliper Replacement Parts
  The Kodiak 225 calipers # KDBC225S fit 3,500 lb 10 inch assemblies as well as 12 inch rotors up to 5,200 lbs. The 204 calipers fit 3,500 lb axles with 10 inch assemblies. The 225 calipers are more prominent than the 204 calipers but they are not directly interchangeable. I reached out to my contact at Dexter (who bought out Kodiak) and he said the mounting locations are slightly different and the piston size is different with the 204 model being roughly a 2 inch diameter piston and the...
  view full answer...
• Bolt Hole Pattern of Replacement Mounting Bracket for Kodiak Disc Brake Caliper # KCMB10RD
  I attached a picture that has all of the mounting hole dimensions of the Kodiak Disc Brake Bracket # KCMB10RD.
  view full answer...
  
• Are Kodiak 225 Calipers Compatible With 13 Inch Trailer Wheels
  According to Dexter who purchased Kodiak awhile back, the 225 calipers are a bit larger than the 204, which means that they aren't compatible with 13 inch wheels. If you went with the 225 caliper, you would need to go with a 14 inch wheel. If you could reply with the wheel bot pattern (see linked article showing how to determine this) and the current size and load rating tire you're using, I'd be happy to recommend a wheel/tire combo for you.
  view full answer...
• Caliper Mounting Bracket For Kodiak 225 Brake Caliper
  Thanks for the pictures! You're correct, the Replacement Mounting Bracket for Kodiak Disc Brake Caliper # KCMB10RD is the correct replacement mounting brackets for your Kodiak 225 brake calipers. Attached is a product overview video for you to check out as well if you haven't already.
  view full answer...
  
• Replacement Mounting Bracket for Disc Brake Caliper
  Yes, we do have replacement mounting brackets but they will be in a different finish than the Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - E-Coat - 3,500 lbs item # K71-633-00. They are the: Replacement Mounting Bracket for Disc Brake Caliper item # KCMB10RS in stainless. Replacement Mounting Bracket for Disc Brake Caliper item # KCMB10RD in dacromet.
  view full answer...

Do you have a question about this Accessories and Part?