Are Kodiak 225 Calipers Compatible With 13 Inch Trailer Wheels
Updated 07/29/2021 | Published 07/28/2021 >
Products Featured in This Question
Question:
I need to replace my Kodiak 204 calipers.. the most available replacement seems to be the 225 model with mounting bracket KCMB 10 RD …. Will I still be able to use the 13” wheels I have now?? Will there clearance for those wheels??
asked by: Thomas A
Expert Reply:
According to Dexter who purchased Kodiak awhile back, the 225 calipers are a bit larger than the 204, which means that they aren't compatible with 13 inch wheels.
If you went with the 225 caliper, you would need to go with a 14 inch wheel.
If you could reply with the wheel bot pattern (see linked article showing how to determine this) and the current size and load rating tire you're using, I'd be happy to recommend a wheel/tire combo for you.
Product Page this Question was Asked From
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Q&A: Is There 3,500 lb Disc Brake Kit that will Fit Behind 13 inch Wheels
- Q&A: Surge Brakes for Demco KK260 Tow Dolly
- Q&A: Brake and Hub Compatibility for a 2,000-lb Trailer Axle with L44643 Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What Air Bags Fit a 2020 Ram 3500 4x4 w/o Factory Air System with a 2" Lift?
- Article: Dexter Service Bulletin #014
- Q&A: Adding a Brake Mounting Flange to Axle That Had Brake Backing Plate Welded To Axle
- Q&A: Do I Need Brakes On Both Axles of a Car Hauler Trailer?
- Q&A: Should Trailer Brakes Go On Front Axle or Rear Axle of Tandem Axle Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace


