See what our Experts say about this CE Smith Boat Trailer Parts

• Looking For New Bunk Brackets For 2003 Ranger 619 Trailer
  Hey Jeff, I can certainly point you in the right direction. We have a few different option for bunk brackets, and we should have something that will work for you. I do not have a way to know exactly what style bracket is on your trailer currently, but one of the most common options are the CE Smith Bolster and Swivel Bracket Assemblies # CE10000G-4. These are 9" tall overall and they mount vertically on the frame using u-bolts. They can be used with virtually any size bunk board. If this...
  view full answer...
• Does etrailer Carry the Replacement Swivel Brackets for a Malone Trailer
  Hey Jason, thanks for stopping by! I did check around to see what we have, and it looks like we don't have those replacement brackets. Based on those measurements, the closest we have is the CE Smith Swivel Bracket for Boat Trailers # CE10201G which measures 1 3/8" wide (-5/8") and has a 2" hole spacing on center. I wish there was something else we can do for you, so if you think of anything please let me know in the comments below!
  view full answer...
• What Type of Bolt Should be Used to Attach Bunk Boards to Swivel Brackets
  All of the swivel brackets we carry use a 1/2 inch fastener (sold separately) to attach the bracket to the mounting surface. The holes to attach to the bunk board are 3/8 inch. You should use the appropriate sized wood screw or bolt to attach the bunk boards to the brackets. One inch long should work fine for you. The brackets are galvanized steel so to avoid mismatched metal corrosion the fasteners you choose will also need to be galvanized.
  view full answer...
• What Hardware is Required for Assembly of the CE Smith Swivel and Bolster Bracket
  The CE Smith Bolster and Swivel Bracket, # CE10100G and # CE10201G, do not use bolts with partial thread to allow the swivel bracket to move. Once you have the swivel bracket at the angle you need, you simply tighten the bolt down to hold the swivel bracket in place. The swivel mounting hole on the swivel and bolster bracket will require a 1/2 inch bolt and the flange mounting holes that are used to secure the bunk board to the swivel bracket are 3/8 inch in diameter. You could simply...
  view full answer...
• L-Bracket with Mounting Holes that are 2 Inches Apart on Center to Mount Trailer Lights
  The square holes on the 4 inch short leg on l-shaped brackets # PF775-BKT-2 are 7/8 inches apart on center. So between the first and third holes or the second and fourth holes the distance on center is 1-3/4 inches. A bracket that might work for you is # CE10201G. The holes on it are 2 inches apart on center. If you can tell me what trailer lights you have, there may be a bracket designed for them.
  view full answer...
• Replacement Boat Trailer Bracket for Bass Boat
  The bracket you described is closest to the CE Smith Double U-Bolt Bolster Bracket - Galvanized Steel - 8-3/4" Tall - Qty 1 # CE10190GA. The CE Smith Bolster Bracket - Aluminum - 8" Tall - Qty 1 # CE10100A40 is similar and also corrosion resistant. These are the shortest options we carry. If you need the top, you can use # CE10200G or # CE10201G.
  view full answer...
• Recommended Swivel Bracket for Bunk Board with 2 Inch Bolt Spacing
  The CE Smith Swivel Bracket for Boat Trailers - Galvanized Steel - 2" Hole Centers - Qty 1 # CE10201G will work very well for your application. They are not rated for a specific weight capacity, but they work very well with the CE Smith Double U-Bolt Bolster Bracket - Galvanized Steel - 9-3/4" Tall - Qty 1 # CE10191GA or other heights along with u-bolt kit # CE15283GA-2.
  view full answer...
• Replacement Brackets for CE Smith Bunk-Style Guide-Ons for Boat Trailers
  If you are talking about the brackets that hold the posts to the frame then you could use kit # CE11452-A. If you are talking about he swivel brackets that hold the bunk boards to the posts then we have # CE10201G with 2 inch hole centers, # CE10206G which is a heavy duty bracket with 2-1/2 inch hole centers, and # CE10200G which is a standard duty bracket with 2-1/2 inch hold centers.
  view full answer...

Do you have a question about this Boat Trailer Part?