CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4

See what our Experts say about this CE Smith Boat Trailer Parts

• Can 6 of the CE Smith Bolster Brackets CE10002G-4 be Ordered
  You would just need to order a quantity of 6 of the part # CE10002G to get six of the brackets that come with the part # CE10002G-4.
  view full answer...
• What Replacement Swivel Heads do You Carry for My Boat Roller Bunks on My Trailer?
  If you have a boat bunk bed bracket system that has swivel heads like the CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4 # CE10000G-4, the only way to extend the length of them is by purchasing longer swivel heads. Currently, our longest swivel heads we carry are 3-1/2 inches long. Those are the Swivel Bracket for Boat Trailers - Zinc Plated Steel - 3-1/2" Long # HP35FR. Unfortunately, if you need anything longer than that, you would have to do a custom fabrication...
  view full answer...
• Switching From Rollers to Bunks on Boat Trailer for 1979 Mako 20
  In order to switch from roller bunks to carpeted bunk boards on your boat trailer you will need to add four of the 5 foot CE Smith Carpeted Bunk Boards for Boat Trailers # CE27820. This is based on the 20' length of your 1979 Mako 20. For swivel brackets to attach them we have the following: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4 # CE10000G-4 CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4 # CE10001G-4 CE Smith Bolster...
  view full answer...
• Tallest Bunk Bolster Brackets to Clear Trailer Tires on a Boat Trailer
  Your best option is going to be bolster bracket set # CE10196G-4 which is a quantity of 4 so if you wanted 6 you would need 2 sets and you would have a couple of spares should they be needed. These are 16-1/4 inches long with some adjustability due to the slotted holes. For u-bolts use # CE15283GA-8 (which is a set of 8 because each needs 2 u-bolts).
  view full answer...
• How High Will CE Smith 13 Inch Bolster Bracket Sit Above 3 Inch Crossmember
  The # CE10002G-4 CE Smith Bolster and Swivel is 13" tall. Assuming you mount it at the position to gain the most height, you should have 9" remaining. Losing the height from attaching to the 3" crossmember leaves you with 10" remaining. You will lose 1" at the bottom with the 1/2" below the lower mounting hole and 1/2" diameter U-bolt. Accounting for the added height of the bunks, you should be sitting over 11" once installed. I have attached a video review of the bracket for your reference.
  view full answer...
• Appropriate Replacement Bolster Brackets for Trailer Carrying 3000-lb Boat/Motor
  We offer bolster brackets both singly and in sets of four and in a range of sizes and types for both bunks and rollers. The link provided will let you see all available parts. You can use the filters at the left-hand side of the page to select parts by type and size. Extra capacity in any system is never a bad idea but these components are not weight-rated so as long as you find a suitable size and type you should be fine.
  view full answer...
• Would Bunk Brackets # CE10002G-4 Have Capacity for 2,060 lb Boat
  Yes the brackets # CE10002G-4 would easily support the weight of your 2,060 lb boat.
  view full answer...
• Bolster Brackets and Swivel Assemblies for SeaDoo Trailer
  I can help you find the correct bolster and swivel brackets for your Seadoo trailer. The CE Smith part # CE10002G is a galvanized 13 inch bolster with a swivel bracket assembly. The swivel bracket will fit your 2 x 4 bunk great, but the brackets included have a 2-1/2 inch center spacing. We do offer a swivel bracket with a 2 inch center spacing # CE10206AA, but with either I would recommend drilling a hole in the bracket where you need it. It's important to keep in mind that its a...
  view full answer...
• Bolster Brackets for Bunks on a Boat Trailer
  Considering that there will be a bunk of some kind mounting on top of the brackets once installed the 11 inch overall height of the CE Smith Bolster and Swivel Mounting Brackets # CE10001G-4 should work just fine for you. If you determine the 11 inches is not enough we do have a set of four 13 inch brackets, # CE10002G-4. The slotted holes on these brackets will allow for some adjustability.
  view full answer...
• Weight Capacity And Parts Needed For Modifying Boat Trailer For 26 Ft Regal Commodore
  I spoke with my contact at CE Smith, and they said the Bolster and Swivel Bracket Assembly for Boat Trailers, part # CE10000G, do not bear the weight of the boat. The U-bolt that attaches the brackets to the trailer frame support the weight of the boat. There should be a bracket attached to each cross member of the trailer frame. If you are buying several brackets, I would recommend part # CE10000G-4. This is a set of 4 of the 9 inch adjustable brackets. If you need longer adjustable brackets...
  view full answer...
• How Many Bolster And Swivel Brackets Are Needed For A Boat Trailer
  I spoke with my contact at CE Smith, and they said the Bolster and Swivel Bracket Assembly for Boat Trailers, like part # CE10000G, do not bear the weight of the boat. The U-bolt that attaches the brackets to the trailer frame support the weight of the boat. There should be a bracket attached to each cross member of the trailer frame. If you are buying several brackets, I would recommend part # CE10000G-4. This is a set of 4 of the 9 inch adjustable brackets. If you need longer adjustable...
  view full answer...
• Recommended Replacement Brackets And Hardware For Karavan SLT-5000
  For your boat trailer, I recommend the CE Smith Bolster and Swivel Bracket Assemblies # CE10002G-4. These brackets are available in different heights. These brackets are held to your trailer with u-bolts like the CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter # CE15283GA-4. These brackets hold on your Bunk boards like the CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair # CE27840 that are available in different lengths or the roller bunks...
  view full answer...
• Recommended Bunk Board Brackets
  We definitely have options for brackets to mount your bunk boards. This will depend on the size needed, of course, but here are a couple options for you to take a look at. The CE Smith # CE10003G-4 will come as a 4 pack and are 11 inches tall, including the swivel bracket on the top. If you need a little more height, the # CE10002G-4 will be much the same, but measure 13 inches. The swivel bracket on the top pf these will let you angle your bunk boards to the angle that suits your needs best.
  view full answer...
• Determining Length of Bolster Bracket for New Bunk System on Boat Trailer
  To be on the safe size, I recommend going with a 13 inch bracket # CE10002G-4 at the back of the trailer and an 11 inch bracket with # CE10003G at the front. A nice feature on these brackets is that they will each actually have as much as 3-3/4 inches of height adjustment due to their mounting slots, so even if its total height is a bit higher than needed, you can adjust them down. This will allow you to have the perfect height for your new bunk support system. I have attached a short...
  view full answer...
• Parts to Convert Roller Bunks to Bunk Boards on Boat Trailer
  It sounds like you are just wanting to switch to carpeted bunk boards. For that you can use the CE Smith Carpeted Bunk Boards for Boat Trailers, which come in a number of different lengths: 5 feet long # CE27820, 6 feet long # CE27840 or 7 feet long # CE27845. To install these you can mount them to brackets that are already on your trailer or use CE Smith Bolster and Swivel Bracket Assemblies; you would need two of these per bunk board. The assemblies are available in different lengths...
  view full answer...
• Bunk Brackets and Keel Rollers for Magic Tilt Boat Trailer
  We do have bunk brackets and keel rollers that you can use with your Magic Tilt boat trailer, though not that size leaf spring. For the brackets you only need to choose the size you want: - 9 Inches: CE Smith Bolster and Swivel Bracket Assemblies # CE10000G-4 - 11 Inches: CE Smith Bolster and Swivel Bracket Assemblies # CE10001G-4 - 13 Inches: CE Smith Bolster and Swivel Bracket Assemblies # CE10002G-4 With each of these brackets you can attach them with CE Smith U-Bolts # CE15283GA-4. As...
  view full answer...
• Do CE Smith Bolster and Swivel Bracket Assemblies # CE10002G-4 Have Weight Capacity
  Roller bunk brackets like the CE Smith Bolster and Swivel Mounting Brackets # CE10002G-4 do not have listed capacities. I spoke to my contact at CE Smith and he informed that that as long as you are under the capacity for your trailer and the roller bunks that are being attached to the brackets the brackets will be fine. For your 2,000 lb boat the # CE10002G-4 would easily have the needed capacity.
  view full answer...
• Can Top of CE Smith Swivel Bracket be Tightened to Keep Them at Angle
  The top of the swivel bracket is not something that can be tightened to completely stop the swivel for the CE Smith Bolster and Swivel Bracket Assemblies # CE10002G-4. So there is always going to be some swivel in these brackets to ensure that they are always at the correct angle when being loaded. I also wanted to mention that to install these brackets you will need U-bolts, the CE Smith U-Bolts # CE15283GA-4. I have added some links below to video reviews for you to check out as well...
  view full answer...
• Does the CE Smith Swivel Bracket Come with a Bolster Bracket
  The swivel bracket # CE10200G is just the L-shaped bracket. it can attach to a bolster bracket. To get the bolster bracket with the swivel already on it you can use one of the following: # CE10000G, 9 inches tall # CE10001G, 11 inches tall # CE10002G, 13 inches tall There are also sets of 4: # CE10000G-4 # CE10001G-4 # CE10002G-4 I have also included a link to the bolster brackets we carry with and without swivel brackets attached.
  view full answer...
• Determining Trailer Bunk Board Length for 14 Foot Sailboat
  It's not an exact science but typically you want the bunk boards on a trailer to extend all the way to the rear of the boat. It wouldn't hurt to have them go a bit beyond this too to ensure proper support during travel. Since the front of the boat should be supported by the bow stop you usually see bunk boards that measure about half the length of the boat itself. Since you no longer have the boards that originally came on your trailer it might also be a good idea to try and contact the...
  view full answer...
• Can Boat Swivel Bunks Be Tightened So they Won't Move
  The nuts that hold the swivel to the brackets like on the # CE10002G-4 can be torqued down to prevent movement if desired.
  view full answer...
• Parts Needed to Add Bunk Boards to Boat Trailer
  To add bunk boards you'll simply need the bunk boards and mounting brackets which attach to the front and rear crossmember of your trailer frame. If you already have brackets you may be able to use them, otherwise, you just need the correct length of boards and brackets: - CE Smith Carpeted Bunk Boards for Boat Trailers - 4' Long # CE27810, 5' Long # CE27820, 6' Long # CE27840, or 7' Long # CE27845 - CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" # CE10000G-4,...
  view full answer...
• Recommended Boat Brackets In 10 Inch Tall Size To Allow Proper Draining With 8 Inch Rear Set
  For you application, I recommend the CE Smith Bolster Bracket - Galvanized Steel - 10" Tall - Qty 1, # CE10101G. This is 10 inches tall and 2-1/2 inches wide. With this product you will most likely want the CE Smith U-Bolt - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 1, # CE15283GA and the CE Smith Swivel Bracket for Boat Trailers - Galvanized Steel - 2-1/2" Hole Centers - Qty 1, # CE10200G. We also have CE Smith Bolster and Swivel Bracket Assemblies - Galvanized...
  view full answer...
• Do CE Smith Bolster and Swivel Bracket Assemblies Have a Weight Capacity
  The CE Smith Bolster and Swivel Bracket Assemblies # CE10002G-4 don't have a weight rating, as they will be able to handle whatever the bunks installed on them can handle. We've confirmed this with CE Smith in the past.
  view full answer...

Do you have a question about this Boat Trailer Part?