How Many Screws Are Included With The Stainless Steel Hex Lag Screw # FA74521?

Question

Question:

HOW MANY COMES WITH ORDER

asked by: HAROLD D

0

Expert Reply:

The Stainless Steel Hex Lag Screw # FA74521 contains one 3/8" diameter, 1-1/4" long lag screw.

expert reply by: Bud M

0

Answer 1

As the bunks will be support the weight of your pontoon boat, I always recommend getting them to the end of the transom, or as close as possible. As you mentioned using 14 foot long boards, you will want at least 4 evenly spaced support brackets per…

view full answer...

Answer 2

The number of bolster brackets varies between 4 and 5 on each side for a 20 foot pontoon trailer. I suggest 10 of the CE Smith Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1, #CE10052-32G. For your bunk boards, I recommend the…

view full answer...

Answer 3

To be on the safe size, I recommend going with a 13 inch bracket #CE10002G-4 at the back of the trailer and an 11 inch bracket with #CE10003G at the front. A nice feature on these brackets is that they will each actually have as much as 3-3/4 inches…

view full answer...

Answer 4

I can certainly understand not wanting to have to connect 2 five-foot carpeted bunk rails like #CE27820 to get the 10 foot bunks you need. We don't offer them in the 10' length because the shipping costs would be more expensive than the bunks…

view full answer...

Answer 5

We have just what you need. For the two 5' bunk boards I recommend the CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair #CE27820, but the longest board we offer is 7' so for the two 109" boards you will need to get…

view full answer...

Answer 6

Ideally you want bunk boards that are at least 50% of the length of your boat, and want the to run from the stern and as far forward as you like. Since your boat is 16' Long you will want at least 8' of bunk boards, but I recommend going with…

view full answer...

Answer 7

We have a really great option for a trailer for your 10 foot Bass Pro Pond Prowler boat, although the Malone trailer you mentioned has been discontinued by the manufacturer and is no longer available. Instead, which I highly recommend is an option…

view full answer...

Answer 8

The CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870 uses #L44649 bearings. The correct Bearing Buddy Bearing Protectors are the #BB1980A-SS. These fit a 1.98" hub bore and L44649 outer bearings. They also have a stainless steel…

view full answer...

Answer 9

Since your main concern is the marks on the hull of your boat I recommend going to the Yates TPR Ribbed Wobble Roller. These rollers are constructed of thermal-plasticized rubber which is a non-marking, non-scratching material. It is stronger and…

view full answer...

Answer 10

The overall width of the body of the Fulton winch part #F142007 is 3-5/8 inches and the overall width with the bolts that run through is right at 4-1/8 inch.

view full answer...

How Many Screws Are Included With The Stainless Steel Hex Lag Screw # FA74521?

Product Page this Question was Asked From

Continue Researching