This stylish, aerodynamic Yakima roof rack gives you the space to carry gear on your vehicle. Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs on your vehicle's naked roof. Great Prices for the best roof rack from Yakima. Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Silver - Qty 2 part number Y93EB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (85927)
Q & A (0)
Related Parts
Photos
Yakima Roof Rack
- Y93EB
Highlights
Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
Complete Roof Rack System: Includes 2 JetStream crossbars, 4 BaseLine towers, and a custom fit kit for your vehicle.
Aerodynamic JetStream Bars: Aero-style aluminum design works with top-channel or clamp-on accessories.
Quick Access Channels: Push-down rubber strips let you install mounts without trimming and help cut wind noise.
Ample Load Capacity: Holds up to 165 lbs—ideal for kayaks, cargo boxes, or other rooftop gear.
Added Security Option: Compatible with Yakima Same Key System lock cores (sold separately) to deter theft.
Features to know about
Keep Trips Quiet and Smooth: Aerodynamic JetStream Crossbars
Wind noise can turn a long drive into a chore, especially when you’ve got gear up top. The JetStream crossbars on this Yakima rack are built with an aerodynamic shape that helps minimize drag and vibration. The rubber strips sit in the top channels, sealing the surface to cut down on whistling and rattling so your ride stays calm even at highway speed.
Skip the Hassle During Setup: Push-Down Rubber Strips Require No Trimming
Installing accessories shouldn’t mean cutting rubber or fussing with parts. The JetStream’s push-down channel strips let you press hardware directly into place—no trimming required. Once you’ve got your gear mounted, the strips close back up to keep things tight and protected against wind and weather.
Pack for Every Season: Works with Channel-Mount and Clamp-On Accessories
This rack makes it easy to switch between activities. The aero-style crossbars work with accessories that mount in the top channels or clamp around the bars. You can load up kayaks, bikes, skis, snowboards, or cargo boxes all on the same setup, giving you flexibility for every trip without swapping racks.
Strong Enough for Serious Loads: Aluminum Bars with 165 lbs Weight Capacity
When you’re carrying bulky or heavy gear, you want bars that hold steady. These aluminum crossbars measure 60" long x 2-3/4" wide x 1-1/8" tall and handle up to 165 lbs—just remember to follow your vehicle’s roof load limits. The sturdy build gives confidence when hauling everything from camping gear to watercraft.
Protect Your Investment: Add SKS Lock Cores for Security
For extra peace of mind, the rack is compatible with Yakima Same Key System (SKS) lock cores (sold separately). Once installed, they help deter theft of the towers and bars so your setup stays right where you left it.
Specs
Dimensions
Crossbar dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
Top channel dimensions: 7/8" wide x 7/16" tall x 7/16" opening
WARNING: This product may contain Phthalates and Antimony Oxide which are known to the State of California to cause cancer. For more information, visitwww.p65warnings.ca.gov
Customers Who Purchased This Roof Rack Also Bought...
3 years ago etrailer helped me to fit Yakima racks on my Honda Accord so that I could carry my kayake. I got a new Honda Accord this year and only had to replace the baseline towers and can still use the other parts. It was pretty easy to install with good directions. 3433578
by:
Amy
07/20/2026
Great service from my knowledgeable salesperson and the product installed easily and performs perfectly. 3588853
by:
Eric
02/26/2025
Great product haven’t had any issues with it. Would highly recommend that anyone that’s looking for a roof rack system and a great seller at etrailer 3270966
Brooke M.
2/26/2025
Thanks, Eric! Glad the crossbars have been working well for you :)
by:
Todd
06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer. 3059204
Great UX for finding the options matching my car, and the baseline towers work great. Simple straightforward site, will plan to use them again when needed.
For those also buying crossbars for cars without roof rails, recommend taking a silver sharpie and marking the placement of the crossbars on the weather seal at the top of the door openings. Makes putting them back on way less of a hassle if you don’t want them on 24/7. 3220931
by:
Hurtlocker
08/12/2023
Strong, Solid Bars, Super Light, and really easy to install! 3059123
These bars worked great for the roof rack on our truck. Thank you! 3308112
by:
Kevin
04/06/2022
Volkswagen
Jetta
Overall these are a great product and much needed. I had a Tiguan with the side rails but needed cross rails for my gear. When I got my Jetta I wanted to keep my Yakima cross rails so I needed the Towers. They work great and fit my car well. I took them off recently after having them on for a year for re-fitment. 3059131
by:
Dave
02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!! 3059202
by:
Steve K.
04/23/2019
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone. 3059119
by:
TimN
03/19/2024
Chevrolet
Silverado
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails. 3059194
by:
Kevin M.
08/29/2020
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense. 3059126
by:
Troy
01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems. 3059118
by:
Richard R
02/20/2023
GMC
Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid. 3059206
by:
John
09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.3059209
by:
Richard
04/06/2023
Happy with the purchase. Crossbars shipped and received quickly. 3059122
by:
John
03/12/2025
Easy to install and met my need for hauling a kayak. 3279962
Gwendolyn Y.
3/13/2025
Hey John. What kind of Kayak do you have?
by:
Sara
03/19/2019
Yakima is always great, the bars are just right for my kayaks and look great too. 3059125
by:
Cary
02/14/2022
Great product and etrailer was super helpful with ordering process etc 3059130
by:
[
04/01/2024
Follow the instructions, and you can't go wrong on the self installation 3059195
by:
Paul
08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack. 3059193
by:
Leslie
02/10/2023
Roof rack parts were ordered correctly and shipped quickly. 3059205
by:
Ian
07/02/2023
Solid build quality and easy installation on my '21 Mazda CX-5. 3059207
by:
Moparnut228
08/20/2023
Great product fast shipping3059198
by:
Mike
05/20/2020
Great product... love that fact that I can take the bars on and off without having to disassemble the system. Very convenient when not its not being used. 3059121
Hey, Nick!
Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle.
I... view full answer...
Hello Joe, thanks for reaching out. Yes, it is possible to put a 60" (or longer) crossbar on your 2022 Subaru Outback. I will need to verify a bit more vehicle information before I can recommend the correct parts.
Does your outback happen to be the Wilderness edition? Let me know. Also please verify that your Outback has the factory installed raised rails running from front to back. Let me know and I will be able to narrow down the right roof rack.
For example, if you do have the Wilderness... view full answer...
Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199.
Then for a square bar roof rack the Thule Portage part # TH819 would work great. view full answer...
I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts:
- Yakima JetStream Crossbars - Aluminum... view full answer...
Hi Cathy,
To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components:
Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429
SkyLine Towers for Yakima Crossbars... view full answer...
Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts:
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item... view full answer...
Hi Alvin,
Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want.
You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need... view full answer...
Niels, to continue using your Yakima JetStream Crossbars # Y00429 with your 2024 GMC Yukon XL with flush rails, you'll just need the SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UV and the SightLine Towers for Yakima Crossbars # Y64AR. view full answer...
Hello Darla, thanks for reaching out. I recommend using a Yakima JetStream bar roof rack on your 2023 Cadillac XT5. The Yakima Crossbars will be compatible with the Thule Hullavator # TH898, and there will be enough overhang on the crossbars to properly support the Hullavator system. The complete roof rack consists of the following parts:
- Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429
- SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails,... view full answer...
To add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV
I have attached a couple of pictures below that will show you what this roof rack looks like and how to... view full answer...
The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the... view full answer...
I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof.
I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack... view full answer...
I checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426.
The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204. view full answer...
Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
This aero bar roof rack system has a 165 lbs capacity.... view full answer...
I would be happy to! To add a Yakima roof rack to your 2024 Nissan Pathfinder you will need the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver
TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR
This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
A great perk of Yakima's products is you can... view full answer...
The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components:
Crossbars # Y00429
Feet # Y28TR
Fit Kits # Y06125 and # Y06165
I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft.
Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,... view full answer...
Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails.
Bare Roof
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- BaseLine Towers # Y28TR
- BaseClip Fit Kit # Y06163... view full answer...
We can definitely set you up with a roof rack for your 2017 Volkswagen Golf Sportwagen that is compatible with the Thule Hullavator # TH898. The Hullavator requires the crossbar to overhang past the tower by 4" to 8", so it will be best to use a solid aero bar setup with a slightly longer crossbar. For that I recommend the Yakima Jetstream roof rack. This will consist of the following parts:
Yakima TimberLine Towers for Yakima Crossbars # Y33TR
Yakima JetStream Crossbars - Aluminum - Silver... view full answer...
The best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers:
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- TimberLine Towers for Yakima Crossbars # Y33TR
I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise.
It is also highly durable,... view full answer...
Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174
BaseClip Fit Kit for Yakima BaseLine... view full answer...
Hey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space.
If... view full answer...
We can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426. view full answer...
The longest crossbar that'll work with the flush roof rails on your new 2023 Toyota Highlander Hybrid Platinum is 50" and is the Yakima roof rack system which uses the following parts:
Crossbars # Y00429
Towers # Y53TR
Landing Pad # Y66VR
This will be long enough to use both but as each one weighs over 40lbs, plus the roof rack weighs about 15lbs you'd be overloading your roof with two kayaks and two hullavators as your roof only has a 165lb capacity per Toyota. view full answer...
To install a roof rack on your A.R.E MX Bed Cap on your 2015 Chevrolet Silverado 1500, you're going to need to install a set of tracks like:
-Yakima Tracks for Roof Racks # Y01126 for 42" long tracks,
-Yakima Tracks for Roof Racks # Y01127 for 54" long tracks, or,
-Yakima Tracks for Roof Racks # Y01135 for 60" long tracks.
From here you'll need an actual set of crossbars like the:
-Yakima JetStream Crossbars # Y00429, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the Landing... view full answer...
Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord.
If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference. view full answer...
Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise.
Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well. view full answer...
Hey, Nick!
Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle.
I... view full answer...
According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for.
If you determine that you have fixed mounting points, I recommend the following setup:
- Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #... view full answer...
There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way.
I've... view full answer...
There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails.
I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof.
The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for... view full answer...
Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well.
As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends... view full answer...
There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof.
The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists... view full answer...
Hi Hamza,
Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components:
Yakima JetStream Crossbars # Y00425
BaseLine... view full answer...
Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199.
Then for a square bar roof rack the Thule Portage part # TH819 would work great. view full answer...
I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts:
- Yakima JetStream Crossbars - Aluminum... view full answer...
For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel. view full answer...
The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack.
The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius... view full answer...
Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure.
If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185.
You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350.
If you can tell... view full answer...
The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip... view full answer...
Hi Tom! I just got to this one so I'm guessing you're going with the Thule Hullavator Pro # TH898 for your setup. I don't have the exact measurement for the 60" bars but it looks like it is too close to call. It will be 4-8" on the top. The 70" bar setup would be best, and it won't be too wide for your truck. Once again you will need the following:
-BaseLine Towers for Yakima Crossbars # Y28TR
-BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185
-Yakima JetStream Crossbars... view full answer...
Hello Zeke,
So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts:
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit # Y06188
- BaseClip... view full answer...
Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts:
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item... view full answer...
The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan.
I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and... view full answer...
For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA
Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427
The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs.... view full answer...
The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those... view full answer...
The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great.
I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and... view full answer...
For your 2013 GMC Terrain with a naked roof you would want a Yakima roof rack like the JetStream part # Y00425, # Y28TR, and # Y06146 and you'd easily be able to carry a Hullavator # TH898. The Hullavator needs a rack that over hangs past the feet a few inches and can install into the top channel of this rack for an easy and secure install. view full answer...
There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof.
The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists... view full answer...
Hello Patrick.
Congrats on the new 2025 Toyota Camry! When I compare the kits I see that it uses the same crossbars # Y00425, and towers # Y28TR. Yes, the base clips and pads are going to be different. The Corolla required different ones for the front and the rear, and the new Camry will use the same part number for the front and rear. You will need to order (2) sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06163. view full answer...
I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle.
I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,... view full answer...
For your 2023 Camry I recommend the Draw-Tite # 36643. This is a Class II hitch so you will have more options for accessories compared the the Class I Curt # C11576. This will allow you to use a bike rack like the Hollywood Racks Destination # HLY94FR. However, we do not carry a hitch mounted kayak/SUP carrier and I'm fairly certain you will have a hard time finding one for a 1-1/4" hitch.
If you aren't able to find one I recommend adding a roof rack like the Yakima JetStream which requires... view full answer...
Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
This aero bar roof rack system has a 165 lbs capacity.... view full answer...
I would be happy to! To add a roof rack to your 2024 Toyota Camry with no rails you will need the following parts:
Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y56UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06163
This flush mounted roof rack does not extend over the sides of your Camry's roof. It has a 165 lbs capacity.
I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. view full answer...
I am partial to the Yakima roof rack. It has extra adjustments that the other rack companies do not have to provide a better fit for your vehicle. This Yakima rack will allow you to open your sunroof provided the roof rack accessories do not interfere with its operation. The rack for your 2020 Porsche Macan will consist of the following:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y00426,
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR,
BaseClip... view full answer...
Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails.
Bare Roof
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- BaseLine Towers # Y28TR
- BaseClip Fit Kit # Y06163... view full answer...
I checked with our rack manufacturers for you, and there is one roof rack option that will fit your 2013 Toyota Venza with the panoramic (or dual) sunroof, with the rack coming from Yakima; it is made up of the following parts:
- Yakima JetStream Crossbars - Black # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06163
- BaseClip Fit Kit # Y06136
This is one of the best roof racks available, as the JetStream bars have what are called "WindRidges" built into... view full answer...
Yes, there is a way to add a roof rack to your 2023 Honda Pilot even though you do not have the side rails, and the best option is from Yakima, consisting of the Crossbars # Y36UV, Fit Kit # Y06152 and Fit Kit # Y06163.
This rack has a flush design which means the crossbars do not extend past the mounting feet for a great look. This aero bar roof rack system has a 165 lbs capacity. The strips in the top channels dramatically reduce drag and wind noise. view full answer...
Yes! The Yakima Roof Rack system for Naked Roofs is confirmed to fit your panoramic roof on your 2011 Toyota Venza. This is a perfect fit for your vehicle. Although, it is important to note that you may not be able to open your sunroof, I recommend measuring the top-most part of your roof when opening to make sure before you attempt it. This Yakima Roof Rack is made of of the parts: # Y00426, # Y28TR, # Y06136, and # Y06163.
Check out the installation video on a different vehicle to... view full answer...
I do have an option for you but please keep in mind that the list of available roof racks for your 2009 Toyota Venza is very limited due to the panoramic roof construction. However, I checked with Yakima and they do offer a system for this vehicle which is the Yakima CoreBar System part # Y00422, part # Y28TR, part # Y06163, and part # Y06136. This system has aero shaped crossbars which means it will be less noisy and provide less drag than other crossbar types. The Yakima towers are also... view full answer...
I would be happy to help you! To add a roof rack to your 2024 Acura MDX, I recommend the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 view full answer...
I have a solution for you but there are no Thule systems that will work with your 2010 Toyota Venza and the panoramic roof. Instead you will want the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06136
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers... view full answer...
I checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof.
For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y28TR and you'd be set. view full answer...
Since you are interested in the Yakima LoadWarrior Cargo Basket with Extension, # Y07070-74, the roof rack that I recommend for your 2005 Scion xB is the Yakima BaseLine Tower Roof Rack which consists of the following parts.
58 Inch Round Crossbars # Y00409
BaseLine Towers # Y28TR
RoundBar Adapter # Y03536
BaseClip Fit Kit # Y06163
The LoadWarrior cargo basket with the extension requires a roof rack with a crossbars spread between 30 inches and 50 inches. The BaseLine Tower roof rack... view full answer...
Inno does not have a roof rack fit for your 2021 Porsche Macan but we do have other options that would work great. For that I would recommend the Yakima round bar roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06163, # Y06189. We recently went out and installed several of the roof racks we carry and everyone really liked the Yakima rack the best even though it does cost a little more than some other options. view full answer...
We can help you with a roof rack for your 2006 Scion xB to allow you to transport your two kayaks. On the linked page you can see all roof rack options for your xB with a bare roof. Please note that these various roof rack systems have differing weight capacities; you will want to be sure to choose one that can handle the combined weight of your two boats plus the chosen kayak carriers you mount on the roof rack.
The lowest-cost roof rack with the maximum 165-lb weight capacity is the... view full answer...
The part you mentioned is just a single crossbar, and is not a fit for a 2020 Honda Passport, but there is an option for a roof rack for a 2020 Passport, so long as you have factory-installed rails that run front-to-back. If you do, the rack that fits is from Malone:
- Malone AirFlow2 Roof Rack # MAL84AR
If you do NOT have raised side rails there isn't a flush-mounted option, but you can still add a high-quality rack from Yakima to your 2020 Honda Passport with the following parts:
-... view full answer...
I recommend installing a Yakima JetStream roof rack on your 2016 Toyota Venza. This is partly due to all of the other roof racks having a "no-fit" note for the sunroof on your vehicle, but also because the Yakima roof racks are top-notch in quality and design. Here is what you need for your application:
60" JetStream Crossbars - Black # Y00426
BaseLine Towers - # Y28TR
BaseClips - # Y06136 AND # Y06163
Lock Core Kit - # Y07204 (optional)
If you let me know what you plan on using the roof... view full answer...
I do have a solution for you, however the Yakima Q Towers referenced in your question are not a confirmed fit for the 2004 Scion xB.
For your 2004 Scion xB with a naked roof, I recommend the complete Yakima Roof Rack which includes the CoreBar Crossbars, part # Y00422 that you mentioned in your question but also the necessary BaseLine Towers and BaseClip Fit Kit, parts # Y28TR and # Y06163 that will serve as the attachment points for the crossbars. These are aero-style crossbars that... view full answer...
For your 2022 Acura MDX, I recommend the Yakima JetStream Crossbars # Y00426. These crossbars are 60" long, and have a maximum capacity of 165-lbs.
Next, you'll need towers like the BaseLine Towers for Yakima Crossbars # Y28TR which have maximum capacity of 220-lbs.
Following the towers, you'll need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06163 and # Y06178. view full answer...
The trunk mount bike rack options for a 2020 Genesis G70 are all hanging style racks and while these will technically get the job done, since you have carbon fiber bikes you want to avoid using a bike rack that will be in contact with your bike frames.
Normally I would say go with a trailer hitch and a hitch mount bike rack because they are more cost-effective and easier to use, but there are no trailer hitches that fit your 2020 Genesis G70 so you'll want to go with a roof rack and a... view full answer...
For a roof rack I recommend the Yakima JetStream roof rack system. You will need the following:
-Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425
-BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR
-BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06163
-Yakima Same Key System (SKS) Lock Cores # Y07204 (optional if you want to add locks)
This roof rack is extremely quiet and looks great on any vehicle. The rack is capable of... view full answer...
Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
This aero bar roof rack system has a 165 lbs capacity.... view full answer...
Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails.
Bare Roof
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- BaseLine Towers # Y28TR
- BaseClip Fit Kit # Y06163... view full answer...
I would be happy to help you! To add a roof rack to your 2024 Acura MDX, I recommend the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 view full answer...
I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier... view full answer...
For a roof rack that is a confirmed fit for your 2013 Hyundai Tucson Limited I recommend the Yakima JetStream Crossbar System which is composed of part # Y00425, part # Y28TR, part # Y06175, and part # Y06178. This system attaches onto the door jambs of your Tucson Limited and are designed specifically to do so. As long as you have a bare roof then this system will work for you. It has aero crossbars for wind resistance and integrated t-slots for use with t-slot mounted accessories.
If... view full answer...
I can only recommend a replacement roof rack since Whispbar was discontinued in the fall of 2016. I recommend replacing your rack with the Yakima aero roof rack. You will need their JetStream Crossbars # Y00425 along with the Towers # Y28TR and Fit Kits # Y06139, # Y06178. view full answer...
For your 2022 Acura MDX, I recommend the Yakima JetStream Crossbars # Y00426. These crossbars are 60" long, and have a maximum capacity of 165-lbs.
Next, you'll need towers like the BaseLine Towers for Yakima Crossbars # Y28TR which have maximum capacity of 220-lbs.
Following the towers, you'll need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06163 and # Y06178. view full answer...
I can definitely get you set up with a roof rack that fits your vehicle. Unfortunately, Rhino-Rack does not offer a naked roof rack fit your vehicle. I do have a roof rack that I can recommend for you. It will consist of the following items:
Round 48" CrossBars for Yakima Roof Rack System (QTY 2), part # Y00408
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03536
BaseClip... view full answer...
It depends on which system you're referring to. It basically comes down to how the roof rack installs and what the manufacturer of the roof rack's recommendations are.
For example, the Thule roof rack that that fits the 2015 Hyundai Tucson is not recommended to be installed on the vehicle at all if it has a panoramic sunroof.
However, the Yakima that's for the Tucson that has a naked roof consisting of the Round CrossBars # Y00408, BaseLine Towers # Y28TR, Adapters # Y03536, and BaseClips... view full answer...
The Yakima roof rack that fits your 2020 Hyundai Tucson will consist of the following;
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425,
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR,
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06130, and the
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06178.
This roof rack has a weight limit of 165 lbs. The JetStream crossbars are elliptical... view full answer...
If your Tucson already has the factory side rails that run front to back, you can install crossbars using the following parts:
53 inch Thule WingBars, part # TH711400 in silver or # TH711420 in black
Evo raised rail feet, part # TH710401
On the other hand if your Tucson has a bare roof, Thule does NOT recommend installing a roof rack on vehicles equipped with the glass roof.
Yakima does not have a prohibition, but they state that the roof and trim are very soft, and that care should... view full answer...
Not all of our roof rack manufacturers have fits for your 2012 Hyundai Tucson that has the sunroof/moonroof, but the Yakima roof rack you referenced part numbers # Y00425, # Y28TR, # Y06175, and # Y06178 does fit and would be a great option for carrying a paddleboard. Once this is installed the Thule SUP Taxi part # TH810001 would do a great job to carry up to two boards. view full answer...
To add a set of Yakima Jetstream crossbars to the bare roof of your 2023 Acura MDX you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
This aero bar roof rack system has a 165 lbs capacity. I recommend... view full answer...
I'm fairly sure the Limited model of the 2015 Hyundai Tucson has factory raised rails on its roof. If so, there are three Malone roof rack options that fit; the 58 inch SteelTop square bars # MPG202, the 65 inch SteelTop square bars # MPG203, and the 58 inch AirFlow2 aero bars # MPG216. Between the three I recommend the AirFlow2 because of the aero bar design that reduces wind noise and has an overall better look, in my opinion.
If I'm wrong about your Hyundai's roof and you actually... view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
2/26/2025
Thanks, Eric! Glad the crossbars have been working well for you :)