This heavy-duty, versatile Yakima roof rack comes with strong, aluminum crossbars. It works with channel-mount and clamp-on accessories, plus each bar has tie-down points on the endcaps. Install to fixed mounting points on your vehicle's roof. Great Prices for the best roof rack from Yakima. Yakima SkyLine Roof Rack for Fixed Mounting Points - HD Crossbars - Aluminum - Black - Qty 2 part number Y88BB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (6208)
Q & A (0)
Related Parts
Photos
Yakima Roof Rack
- Y88BB
Highlights
Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
Complete Roof Rack System: Includes 2 HD crossbars, 4 SkyLine towers, 4 HD adapters, and a custom fit kit for your vehicle.
Heavy-Duty Aluminum Build: Supports up to 500 lbs for hauling kayaks, cargo boxes, or other gear.
Accessory-Ready Design: Works with channel-mount or clamp-on carriers for bikes, watersports, snow, and cargo.
Integrated Tie-Down Points: Endcaps provide secure spots to strap gear quickly and safely.
Quieter Drive: Rubberized strips in top channels help reduce wind noise and drag on the road.
Features to know about
Carry Heavy Gear Without Worry: Strong Aluminum HD Crossbars
When you’re loading up for a trip with kayaks, cargo boxes, or heavy camping gear, you want bars that can handle it. These Yakima HD crossbars are built from heavy-duty aluminum and rated for a 500-lb weight capacity, so they stay solid and secure under heavy loads. The bars measure 55" long x 3" wide x 1-1/2" tall, giving you the strength and surface area needed to confidently haul your larger equipment wherever the road takes you.
Keep Your Ride Quiet: Rubberized Strips that Cut Wind Noise
A lot of roof racks can make the drive noisy, especially at highway speeds. These bars have rubberized strips in the top channels that help smooth airflow and reduce wind noise and drag. That means your setup stays more aerodynamic and your ride feels calmer and more comfortable on long stretches of road.
Mount Any Adventure Accessory: Works with Channel-Mount and Clamp-On Gear
Whether it’s bikes in the summer or skis in the winter, this rack is ready to carry just about anything. The crossbars are compatible with both channel-mount and clamp-on accessories, giving you flexibility for all kinds of gear setups. You can mix and match carriers from different brands without needing special adapters or a second set of bars.
Secure and Easy Tie-Downs: Built-In Endcap Points
Loading up can be tricky when you’re juggling straps and gear. The integrated tie-down points on each endcap make it simple to strap down kayaks, tents, or cargo boxes quickly and securely. It’s a small detail that makes a big difference when you’re getting ready to hit the road or setting up camp at the end of a long day.
Add Theft Protection Later: Compatible with Yakima SKS Lock Cores
If you want extra peace of mind, this rack is compatible with Yakima’s Same Key System (SKS) lock cores—sold separately—that deter theft of the rack. It’s an easy way to keep your investment safe when your vehicle is parked overnight or at a trailhead.
Specs
Dimensions
Crossbar dimensions: 55" long x 3" wide x 1-1/2" tall
Top channel dimensions: 13/16" wide x 1/4" tall x 3/8" opening
Weight and Capacity
Weight capacity: 500 lbs
Color
Color: black
Construction
Construction: aluminum
Warranty
Limited lifetime warranty
8001156 Yakima HD Bar T-Slot Crossbars - Aluminum - Black - 55" Long - 500 lbs - Qty 2
8000163 Yakima SkyLine Roof Rack Towers for CoreBar, JetStream, and RoundBar Crossbars - Qty 4
8000224 Yakima Landing Pad 4
8003541 HD Bar Adapter for Yakima StreamLine, BaseLine, TimberLine, Skyline, and RidgeLine Towers - Qty 4
WARNING: This product may contain Phthalates and Antimony Oxide which are known to the State of California to cause cancer. For more information, visitwww.p65warnings.ca.gov
Customers Who Purchased This Roof Rack Also Bought...
Good inventory choices, excellent customer service with advice on vehicle compatibility, and prompt shipment. I'm a repeat customer at etrailer for good reason! 3542227
by:
Corie
07/28/2026
Perfect and thank you for great price & fast delivery! 3595904
by:
Pedro
05/26/2024
Works perfect for our SUP with the tie down loops. Great for building materials as well. Looks great as well. 3145381
Solid and well made products, easy to install. 3559953
by:
Robert T.
08/20/2025
Excellent customer service and prompt delivery. They even followed up to make sure everything was correct with my order. I highly recommend ETrailer! 3394323
by:
Frank
04/16/2026
easy install. Worked as advertised3522973
by:
Bill K
07/01/2023
I ordered the Yakima roof rack for a 2019 Hyundai Ioniq. I went with the heavy duty one for extra strength but it is quite a bit thicker, likely increasing wind noise. So I might have chosen the aerodynamic lighter weight one if I was to do it again. Also, I needed to get larger bolts for my kayak holder to get around the crossbar. The instructions and video on website were very helpful but they did not explain well how to adjust the toe and pitch. For the toe adjustment, you have to push the metal post with the tool before tightening. That was not obvious. For the pitch, it helped to do that once the towers are attached to crossbar. Then you can tilt tower while cross bar is laying flat (upside down). I ended up having to add tilt on both front and back crossbars for them to be flat when installed. Website said only front one would need to be pitched. I am very pleased with the look and sturdiness of the product. My Hyundai Dealer had zero options for this car. 3095669
Great product and even better was the service with etrailer! These guys make it happen and delivery was super fast. Thanks for a fantastic experience, will be a return customer.
This item was just a component of a 4 or 5-part order that I have been working on in recent months. All of the items would receive 5-stars along with the eTrailer fulfillment, customer service, and video product review/installation teams. I appreciate your commitment to outstanding service. 3316871
by:
Richard
05/02/2022
Required for Yakima HD crossbars using timberland tower system. 3095753
I choose etrailer simply because they mailed to APO. I’m a AD SM, and a lot of companies don’t shop to APO. As soon as I ordered my product, I received an email as a courtesy from etrailer letting me know I had an individual that would be tracking my product every step of the way, reassuring a smooth process. Their site functionality was easy, their customer service was great. I wanted to know if they had bike racks that would fit my cross bars, I got a email right away with a suggestion and a link that would fit my needs. I’ll definitely order from etrailer if I ever need to again. 3095772
by:
John
11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation. 3095813
All parts of adapter were not needed. Instructions were a little unclear. 3377227
by:
Domenick
02/01/2021
The roof rack works well. The only problem I have is noise and while I'm carrying a ladder there is none. I figured if I take the ladder off I'll split a piece of pvc pipe and mount that on the front of it. But they work well for what I needed for work. The service from etrailer was excellant. I dealt with Carol and she did a very good job in helping me. 3095775
by:
Daniel
04/30/2025
Fast shipping and great updates on my items. Thank you! 3311798
by:
Kevin
06/22/2025
I put it with the Timberline system and worked great 3354509
by:
Michael
01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers. I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design. 3095814
by:
Donald
03/26/2023
I had a difficult time identifying whether these were the correct adapters for the rack towers that I was purchasing to fit my tracks but that has more to do with yakima doing everything a-la-cart instead of having kits that include everything you need if I hadn't already had the HD bars on my other rack and wanted to be able to transfer them to this rack I probably wouldn't have went to this expense because I think they are overpriced.AS far as etrailer is concerned I always receive great service and products and they are always well packaged and never damaged by poor delivery care and always fast delivery speed. 3095773
by:
Troy
01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems. 3095645
by:
Donald
07/13/2022
These Yakima crossbars are very HD, just what I was looking for. The Small size was hard to locate but etrailer had them in stock and delivered in short order. Instillation was quick and straight forward. 3095673
by:
Jeffrey
06/02/2022
Everything was perfect and relatively easy to setup. Ì bought from etrailer due to the actual manufacturer being out of stock, I was skeptical when I ordered but very glad I did. Would 100% recommend etrailer. 3095664
by:
Robert
07/13/2021
The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again. 3095757
To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into.
Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack:
Yakima HD Crossbars - 55" Long # Y01156
SkyLine Towers # Y53TR
Landing Pad 28 # Y66VR
HD... view full answer...
The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails.
With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you... view full answer...
The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately. view full answer...
Bruce, to mount the Thule Hullavator # TH898 on your 2024 Subaru Outback Touring, you're just going to need to add a set of crossbars.
I recommend going with an Aero style, personally, like the Thule WingBar Evo Crossbars # TH711120 with the feet # TH710601 and the fit kit # TH37CE.
These aren't any more or less special than the others, but I think the shape of these bars are much nicer and it will work with about every accessory that requires bars to mount. view full answer...
For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes:
Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156
SkyLine Towers for Yakima Crossbars # Y53TR
Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR
HD Bar SL Adapter # Y03541
The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will... view full answer...
Hey Bo, it is not normal for the Yakima 60 inch HD crossbars like the part # Y01156 to have a downward bow in the middle of them. They should be basically totally flat. I attached a picture of what they should look like for you to check out. view full answer...
Hello Mike.
I am happy to find the right roof rack system for you but first I need a little more information about your Lexus GX 460. The rails that run from front to back, are the flush mounted or raised? view full answer...
The Yakima HD Crossbars # Y01156 will work with the Thule Hullavator # TH898. Based on the pictures you sent in it looks like you have the crossbars installed upside down. The end caps have an opening on the other side that lets you easily slide in t-slot accessories.
You'll just need to unmount the crossbars from the towers, flip them over, and remount them to the towers. The screw seen in your pictures is what holds the endcaps in place. Removing those will allow you to remove the endcaps.... view full answer...
To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts:
Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -... view full answer...
I would be happy to help you find a set of crossbars that will fit the factory raised rails of your 2023 Kia Sorento. This kit mounts directly to the side rails. You will want the roof rack by Yakima and it includes the following parts:
Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156
TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR
HD Bar SL Adapter for Yakima TimberLine Towers - Qty 4 item # Y03541
This aero bar roof rack... view full answer...
The maximum static weight capacity for the Yakima HD Crossbars # Y01156 along with the Timberline Towers # Y33TR on your 2022 Subaru Outback Wagon is rated at 500 pounds. This weight limit is the maximum weight limit for each of the components. To have a complete crossbar system, you will also need the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine # Y03541. You also have the option to add Yakima Same-Key Lock cores # Y07204 to deter the theft of your crossbars. view full answer...
To install Thule's load-assist Hullavator kayak carrier # TH898 on a vehicle's roof rack the ends of the bars must extend out past the roof rack feet by at least 4-inches. You can see this requirement illustrated in the linked diagram. The comparable Yakima ShowDown carrier # Y04081 also has a similar bar space requirement.
If your roof rack is a Subaru factory type whose bars do not extend past the rack feet/rails then you can still use the Hullavator but you'll need to add a different... view full answer...
I have a different kayak carrier option for you, but the Thule Hullavator # TH898 you mentioned are 36" long each and while a bit of them will hang over the end of the crossbars the longest crossbars available for your 2021 Toyota RAV4 are 55" so you will not have enough room.
Instead I recommend going with the Hullavator on one side of the vehicle, and a standard carrier such as the Malone SeaWing W/Load Assist # MPG113MD one the other side as it is much lighter and quite a bit narrower.
The... view full answer...
This Replacement Mounting Bracket # 8880735 is for the Yakima SkyRise Rooftop Tent like # Y07437. These tents and their clamps are compatible with most aftermarket round, square, aero, and elliptical crossbars including Yakima HD crossbars like # Y01156.
I recommend getting replacement lock cores # Y07204 as well so that you can use the same key with both your new bracket and your old brackets. If you know the key numbers of your other mounting brackets, you can order a single separate... view full answer...
You can absolutely use Yakima HD crossbars with the Yakima MegaWarrior Large Roof Rack Cargo Basket # Y07080.
The two are compatible, but you will need to use the clamps to install the MegaWarrior as there is not a way to mount this basket in the bars' channel. The only thing I do recommend adding to this basket, in order to protect your investment, is the Locking Brackets with SKS Cores # Y07064.
As for the Yakima HD crossbars, they are available in a number of different sizes: 55 inches... view full answer...
In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet.
If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the:
- Yakima HD Crossbars # Y01156
- BaseLine Towers for Yakima Crossbars # Y28TR
- HD Bar SL Adapter # Y03541
- BaseClip Fit Kit # Y06130
- BaseClip Fit Kit # Y06154
If you have flush mounted... view full answer...
For your 2016 Lexus GX 460, you will need the Landing Pad 30 for Yakima SkyLine And Control Towers - Qty 6, part # Y25ZR, and not a RidgeClip. This kit works for Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 part # Y01156. You will also need the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03541. The last thing you will need is the Yakima RidgeLine Towers For Yakima Crossbars part # Y00145. This rack will have a weight limit... view full answer...
I went ahead and spoke with Yakima and they said that you actually can use the Yakima HD Crossbars # Y01156 with the BaseLine Towers for Yakima Crossbars # Y28TR, the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541 and the fit kits # Y06175 & # Y06160 with your 2015 Lexus ES 350 that has a glass roof.
We list this as a "non-fit" due to the fact that you could potentially damage your sunroof while this system is installed, but it'll physically fit... view full answer...
Yes, we do have options to add a roof rack to your 2020 Kia Sportage without roof rails. I recommend the Kia Sportage Roof Rack by Yakima. You will need the following parts:
Yakima HD Crossbars 500 lbs Capacity Aluminum - Black - 55" Long - Qty 2 item # Y01156
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers... view full answer...
Yes, you can absolutely mount your Thule Hullavator Pro Kayak Carrier # TH898 into the T-slot channels of the Yakima HD crossbars. The HD crossbars are available in the following sizes:
- 55" Long: Yakima HD Crossbars # Y01156
- 60" Long: Yakima HD Crossbars # Y01157
- 68" Long: Yakima HD Crossbars # Y01158
- 78" Long: Yakima HD Crossbars # Y01159 view full answer...
That is an excellent setup and I know you'll be happy with that on your 2016 Toyota Tacoma. I'll list out all of the parts you'll need (just so you have them all in one place) but I did want to say while the OverHaul HD does come with locks, we don't have a way to choose the correct lock cores that come in the packaging so your best bet is to go with the 6-lock core SKS # Y07206 because it gives you matching cores for the 2 needed for the ladder rack and then the 4 needed for the roof rack.
With... view full answer...
To make sure that you can get the spread you need to have to mount your rooftop tent you'll need to take some measurements. On your flush rails there will be fixed mounting points on the top of the rails. When you have flush rails you won't be able to adjust the spread at all. That is your maximum mounting width. If the fixed mounting points match up to your rooftop tent, you can get a roof rack for your 2021 Honda CR-V. I Recommend getting a hefty system like the Yakima HD Bars # Y01156... view full answer...
The Yakima BedRock HD Towers part # Y01160 for Truck Bed Rails will only work with the Yakima HD crossbars part # Y01156 for 55" part # Y01157 for 60" and part # Y01158 for 68" bars so the Thule Xsporter bars would not be compatible. view full answer...
If your 2022 Toyota Highlander has flush mounted rails that run from the front to the back of the vehicle then I recommend the following parts:
Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR
HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541
Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR
If... view full answer...
To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into.
Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack:
Yakima HD Crossbars - 55" Long # Y01156
SkyLine Towers # Y53TR
Landing Pad 28 # Y66VR
HD... view full answer...
The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR.... view full answer...
The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails.
With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you... view full answer...
I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear. view full answer...
To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to... view full answer...
The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set. view full answer...
The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch... view full answer...
The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately. view full answer...
Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle.
Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts:
- Yakima... view full answer...
Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs.
The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists... view full answer...
The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system.
For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each:
Malone... view full answer...
For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes:
Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156
SkyLine Towers for Yakima Crossbars # Y53TR
Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR
HD Bar SL Adapter # Y03541
The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will... view full answer...
Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following:
-SkyLine Towers for Yakima Crossbars # Y53TR
-Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221
-Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425
OR
-Yakima... view full answer...
Thank you for all of the information!
While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator.
I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the... view full answer...
Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following:
-Yakima JetStream Crossbars # Y00426
-SkyLine Towers for Yakima Crossbars # Y53TR
-Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR
The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the... view full answer...
Hey Scott!
No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van.
For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation.... view full answer...
I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine... view full answer...
Hi Daniel,
The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though:
HD Bar SL Adapter for Yakima Towers part # Y03541
SkyLine Towers for Yakima Crossbars part # Y53TR
Landing Pad 1 for Yakima Control Towers part # Y00221
Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure... view full answer...
I'd be more than happy to help out!
The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following:
50" JetStream Crossbars - # Y00425
SkyLine Towers - # Y53TR
Landing Pad 19 - # Y00245
Lock Core Kit - # Y07204 (optional)
This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you! view full answer...
Hi Phillip,
To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60").
I've attached a picture below from Yakima's website showing this fit. view full answer...
Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600.
Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work.
As an alternative, you could use the 70"... view full answer...
Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following:
-Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221
-SkyLine Towers for Yakima Crossbars # Y53TR
-Yakima CoreBar Crossbars -... view full answer...
The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators. view full answer...
For your 2019 Tahoe, I recommend the Yakima system consisting of:
Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157
SkyLine Towers # Y53TR
HD Bar SL Adapters # Y03541
Landing Pad 17 # Y00243
I also recommend adding locks # Y07204
This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity. view full answer...
To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into.
Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack:
Yakima HD Crossbars - 55" Long # Y01156
SkyLine Towers # Y53TR
Landing Pad 28 # Y66VR
HD... view full answer...
Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord.
If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference. view full answer...
The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails.
With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you... view full answer...
Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar. view full answer...
The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately. view full answer...
For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes:
Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156
SkyLine Towers for Yakima Crossbars # Y53TR
Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR
HD Bar SL Adapter # Y03541
The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will... view full answer...
Hi Daniel,
The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though:
HD Bar SL Adapter for Yakima Towers part # Y03541
SkyLine Towers for Yakima Crossbars part # Y53TR
Landing Pad 1 for Yakima Control Towers part # Y00221
Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure... view full answer...
For your 2019 Tahoe, I recommend the Yakima system consisting of:
Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157
SkyLine Towers # Y53TR
HD Bar SL Adapters # Y03541
Landing Pad 17 # Y00243
I also recommend adding locks # Y07204
This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity. view full answer...
The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs.
For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached... view full answer...
The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar... view full answer...
Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this... view full answer...
Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this... view full answer...
We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors. view full answer...
The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable.
So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set. view full answer...
Hi Kristen!
The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options:
Aero Bar Option:
Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427
SightLine Towers for Yakima Crossbars - Flush... view full answer...
Hey Philip! It looks like the kayaks are 37" wide so 74" for both. The Yakima HD Crossbars # Y01159 are 78" long and can be installed using the # TimberLine Towers # Y33TR and HD Bar Adapter # Y03541. However, the specs show these weigh 152 lbs each, is that correct? The weight limit of the feet/towers is 220 lbs so if they are that heavy a roof rack won't be an option. Your vehicle roof capacity may not be high enough to hold them either.
If the total weight of your kayaks is 304 lbs... view full answer...
Hey Dan, thanks for reaching out!
Yes, the HD Bar SL Adapter Kit # Y03541 will fit the newer gen SightLine Towers # Y64AR.
Do you already have the Yakima HD Bars? If not, what is the year/make/model of your vehicle so I can make sure you get the right length? view full answer...
Hey Rueben,
Thule doesn't have a ladder rack fit for the 2024 Ford Maverick so you'll need to go with a different rack. The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 would be the best option since its tower height can be adjusted from 19" up to 30" tall from the top of the bedrails.
To add on an additional crossbar to the roof of your Maverick you would need the following components:
BaseClip Fit Kit # Y06180
BaseLine Towers # Y62TR
HD Bar SL Adapter # Y03541
Yakima... view full answer...
Hey Erik,
With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components:
TimberLine Towers for Yakima Crossbars # Y33TR
HD Bar SL Adapter # Y03541
Yakima HD Crossbars - 68" Long # Y01158
I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy... view full answer...
Hey Drew, thanks for reaching out and providing all of your information!
The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails.
If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541... view full answer...
For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter).
To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned.
Most truck ladder racks use longer crossbars... view full answer...
To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts:
Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -... view full answer...
It depends on how you're installing it! I installed two versions of the Yakima Overhaul HD on a 2021 Toyota Tacoma with a 5' bed. The OverHaul HD is always my favorite recommendation since it's a super solid ladder rack that looks and works perfectly on the Tacoma.
The version that mounts to the utility tracks # Y01151-5868 has a maximum crossbar spread of 40". You can see that measurement around the 3:20 minute mark in the video I attached below. For the version that installs onto tonneau... view full answer...
I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as... view full answer...
The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles. view full answer...
Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have. view full answer...
The landing pad you have is either going to be in the kit Landing Pad 1 # Y00221 or Landing Pad 4 # Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut. view full answer...
The Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit. view full answer...
I believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars.
Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and... view full answer...
For a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224.
You can also lock this rack with the lock core set part # Y07204 which would help prevent theft.
Sorry to hear about your factory rack getting stolen. view full answer...
Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2.
To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following:
48" Round Bars - # Y00408
58" Round Bars... view full answer...
For your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82.
This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs.
To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #... view full answer...
Your 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided.
A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike... view full answer...
The current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them.
You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban.
If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno... view full answer...
For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well.
We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer. view full answer...
To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts:
- 60" JetStream Crossbars # Y00426
- SkyLine Towers # Y53TR
- Landing Pad 4 # Y00224
This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed.
The Pioneer Platform # RR85ZW... view full answer...
For your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic. view full answer...
If the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227.
You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)... view full answer...
When installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support.
To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224.
I have attached a product review video for this roof... view full answer...
For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to... view full answer...
If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224.
We don't have a good solution to cover where the old spare was installed.
If you make it near St. Louis MO we could help out with the install too! view full answer...
To carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars.
Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224.
For a 2005 Caravan that has... view full answer...
The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3.
However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out.
I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest... view full answer...
The roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options. view full answer...
The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles. view full answer...
Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have. view full answer...
The landing pad you have is either going to be in the kit Landing Pad 1 # Y00221 or Landing Pad 4 # Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut. view full answer...
The Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit. view full answer...
I believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars.
Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and... view full answer...
For a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224.
You can also lock this rack with the lock core set part # Y07204 which would help prevent theft.
Sorry to hear about your factory rack getting stolen. view full answer...
Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2.
To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following:
48" Round Bars - # Y00408
58" Round Bars... view full answer...
For your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82.
This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs.
To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #... view full answer...
Your 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided.
A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike... view full answer...
The current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them.
You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban.
If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno... view full answer...
For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well.
We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer. view full answer...
To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts:
- 60" JetStream Crossbars # Y00426
- SkyLine Towers # Y53TR
- Landing Pad 4 # Y00224
This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed.
The Pioneer Platform # RR85ZW... view full answer...
For your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic. view full answer...
If the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227.
You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)... view full answer...
When installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support.
To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224.
I have attached a product review video for this roof... view full answer...
For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to... view full answer...
If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224.
We don't have a good solution to cover where the old spare was installed.
If you make it near St. Louis MO we could help out with the install too! view full answer...
To carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars.
Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224.
For a 2005 Caravan that has... view full answer...
The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3.
However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out.
I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest... view full answer...
The roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options. view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.