bing tracking image
  1. Trailer Hitch
  2. etrailer
  3. 2 Inch Hitch
  4. Class III
  5. 4000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2011 Dodge Challenger
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
etrailer

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Part Number: e98903
In Stock
$243.81
Retail:$416.83
You Save: $173.02
Trailer Hitch
Not Confirmed to Fit

2011 Dodge Challenger

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. Great Prices for the best trailer hitch from etrailer. etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part number e98903 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (282)
  • Q & A (0)
  • Photos

etrailer Trailer Hitch - e98903

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Standard 2" Receiver: Works with bike racks, cargo carriers, and towing accessories
  • Tows up to 4,000 lbs (GTW): Handles small campers, boats, or utility trailers safely
  • Holds up to 400 lbs (TW): Supports heavier hitch-mount gear without flexing
  • Bolt-On Installation: Mounts to frame with included hardware—no drilling or welding
  • Matte Black Powder Coat: Resists rust and hides dirt for a durable, clean look
Made in USA

Features to know about

Add Real Utility for Everyday Hauling: Class III 2" Trailer Hitch Receiver

This hitch brings serious flexibility to your vehicle. With a 2" x 2" receiver opening, it’s ready for ball mounts, bike racks, or cargo carriers without needing adapters. The Class III rating gives you up to 4,000 lbs gross trailer weight and 400 lbs tongue weight, and the same when used with weight distribution. Whether you’re towing a small camper or adding a rack for an extra set of bikes, this hitch has the strength and clearance you need for everyday use.

No Compromise Strength: Fully Welded Steel with Matte Black Powder Coat

Built from fully welded steel and finished in a matte black powder coat, this hitch is made to hold up under regular use and rough conditions. The matte carbide-like texture isn’t just for looks — it hides scuffs and road grime better than a glossy finish while resisting rust and corrosion. It keeps a clean, rugged appearance over time, even after loading and unloading gear or towing through bad weather.

Side-by-side comparison of matte carbide black and glossy trailer hitch finishes showing the textured, non-reflective matte coating versus shiny gloss surface.

Close-up view comparing matte carbide black finish to glossy black trailer hitch surface, highlighting texture and light reflection differences.

Simpler Install at Home: Bolt-On Design with Included Hardware

You don’t need a shop or special tools for this one. The bolt-on design uses the existing frame holes for a precise fit, with no welding required. Every hitch comes with the complete hardware kit and clear instructions so you can line everything up easily in your driveway or garage. Once bolted on, you’ve got a secure mount that’s aligned perfectly to the frame for reliable towing and accessory mounting.

Specs

Receiver Dimensions

  • Receiver opening: 2" x 2"

Class and Rating

  • Rating: Class III

Weight Capacities

  • Maximum gross trailer weight: 4,000 lbs
  • Maximum GTW when used with weight distribution: 5,000 lbs
  • Maximum tongue weight: 400 lbs
  • Maximum TW when used with weight distribution: 500 lbs

Warranty

  • Limited lifetime warranty

e98903 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide

Similar to Draw-Tite 76046-SK

Installation Details E98903 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.7

282 reviews
5 Stars
(224)
4 Stars
(40)
3 Stars
(6)
2 Stars
(4)
1 Star
(8)
Review Sort Icon
by:
2023 Chrysler Pacifica
Ordered it and received it within a couple of days. Got a email from etrailer to check in with my experience which was a welcome surprise on their commitment to customer service.

Love the matte powder coat finish. Blends in with the matte black bumper trim. Strong and sturdy. Perfect for my Thule Outpace 3 bike rack. No rattles and holds my multiple ebikes with ease.

Installed on hybrid Pinnacle Pacifica. Instructions are terse. Use the online YouTube videos as they explain it better. Instructions include steps for how to unmount the carbon canister found on hybrids but no instructions on how to remount since the old mounting holes are now blocked. Canister is light so I ended up zip tying it to the frame. Between that and the underbody cover I don't notice any rattling. Started at 2pm, dinner break for a couple of hours and fully reassembled by 9pm. Used a car jack to help get in into position as it was a tight fit.

In hindsight I see that etrailer's Curt C29UR has dedicated brackets for the hybrid canister to move it. However that kit costs $40 more. If you have a hybrid might consider buying that instead. That model also hides the bar in the bumper but does require cutting a larger section of the underbody paneling.

Overall, extremely pleased with the product and the responsive customer service. Shout out to William for the support. Will definitely buy from etrailer again.
Kate F. profile picture
Etrailer Expert

Kate F.

6/5/2026

Thanks for your review, Simon! I'm glad to hear the hitch has been a great match for your Pacifica and your Thule Outpace 3 bike rack. I really appreciate you taking the time to share such detailed installation notes, especially regarding the hybrid model and canister relocation. That kind of firsthand feedback can be incredibly helpful for other Pacifica owners. Thank you for including all the photos as well. I especially love the big smile on your face in the finished install picture. I get that same smile after wrapping up one of my own installs, so I know exactly the feeling! I'm also happy to hear William was able to provide the support you needed. Do you and your family have a specific trail you like to go riding on? My granddaughter just got her first big kid bike with gears and all, we have some great paved trails at the parks here in Missouri so we have been getting out quite a bit!

Simon profile picture

Simon

6/5/2026

@KateF, Yep! Before installing the hitch we only cycled on trails in town. This summer were going to take a family road trip out to Montana to do the Hiawatha Trail. Very excited to be able to confidently haul our bikes and try out new trails and places!
by:
Finally got warm enough to tackle this hitch.  Went pretty well, but the dimensions they show on the sheet that came with the hitch are a little off (heat shield and bottom panel.)  I could tell the guy in the video was cutting in places a couple inches off from the instruction sheet.  I could have taken a little bit less off the heat shield and maybe moved the slot on the bottom panel over about an inch.  For the bottom panel, I just forced it on there and after replacing all the screws, removed what was still interfering with a utility knife.  I installed this by myself, with the help of a jackstand, and the Pacifica backed up on my oil changing ramps.   I have attached a couple of pictures.
Brooke M. profile picture
Etrailer Expert

Brooke M.

6/19/2025

I appreciate your honesty and the photos you sent in too. It's super nice for others to be able to read this and at the very least be on the lookout for the discrepancy you came across, too. Thanks Mark!

by:
Etrailer hitch arrived in 2 days from order on a Saturday even! I installed it with the great little provided fish wires. The instructions were complete with the size of metric sockets needed. The instructions for the cutting of the sound proofing were not the same as my AWD insulation but I figured it out. I watched the video provided in my order shipping confirmation and it was just what I needed to clearly understand the install.

Two hints: when cutting the insulation make sure to leave all attachment point holes that will secure the insulation regardless of any mistaken over cutting and use a small floor jack with a 1 foot square wooden piece on top to hold the heavy hitch in place while positioning the hitch on the fish wired bolts. This worked great. The actual installation was simpler than the figuring where to cut the insulation.
by:
Install went fairly well. My model hybrid had an electrical box on the drivers side that had to be removed and wasn't in the documentation. I ended up having to cut out some of the plastic on the mount in order to get it re-attached after installing the trailer hitch.
by:
2025 Chrysler Pacifica
Excellent product but the install video should be updated to show more passenger side, especially sequencing of the bolt installs into the frame
Richard profile picture

Richard

7/9/2026

Absolutely no issues at all. Would recommend to anyone.

by:
2025 Chrysler Pacifica
Etrailer helped make sure I purchased the right receiver for my vehicle. It arrived quickly and worked perfectly.
by:
2022 Chrysler Pacifica
Good instructions. Good fit. All the parts.
Jose profile picture

Jose

7/1/2026

No complaints after a year of use.

by:
This is definitely the wrong part. Please send me the information of how to return it.
Mike L. profile picture
Etrailer Expert

Mike L.

7/8/2026

I'll have that info sent right out, Peter.

by:
Quality hitch with good instructions on how to install from etrailer.
Chandler T. profile picture

Chandler T.

3/2/2026

Hitch has continued to work well. I use it to carry a hitch mounted cargo carrier and would recommend it.

by:
Got a hitch for a hybrid, and installation was very easy.
by:
The hitch is nice overall. The hole to accommodate the ground stud on the driver's side is WAY off location. Had to drill the hole bigger and use a carbide burr to make it oblong. It was mentioned in the installation video but it's much worse than he let on.
by:
2024 Chrysler Pacifica
Great shipping and service.
by:
I picked Etrailer hitch because they had a simple install video where I able to see the hitch on the actual vehicle. I trusted the product because it was their own. I easily even reached an actual person when I had a question. I have only used the hitch to haul bikes
by:
Product fit perfectly for my 2021 Chrysler Pacifica. Instructions were a bit difficult to understand but the video provided through your website helped greatly! Hitch receiver worked well with our bike rack for our ebikes.
by:
2017 Chrysler Pacifica
After paying returns shipping for the wrong product. This one fit well and the instructions were easy to follow for installation. Highly recommend the video the company links to the order.
by:
Josh and his team are excellent! Checked on me after the sale to ensure all was well. Hitch install was a breeze and works perfectly!
by:
Solid and good paint job. Went in with no problems. Followed instructions that came with the hitch and watched the video. Pic is with a bike rack mounted.
by:
2025 Chrysler Voyager
This trailer hitch receiver is about the fourth one I've bought from etrailer over the years. It has always been for the same model car. My wife and I have worked as a team and have installed all of them ourselves. We're now 86 and 82 years old. My wife hurt her arm and can't hold up her end of the hitch so when we bought the new car, it went from the sales floor to the body shop and the younger guys installed it. Best $65 we spent. It took them a lot less time to install it but it looks like they followed the instructions that came with it. I think I bought the last hitch in 2018 and the price doesn't seem to change very much. A very pleasant surprise.
by:
2017 Chrysler Pacifica
Hitch looks great looking forward to putting on the bike rack.
by:
2025 Chrysler Pacifica
Fits perfectly need help to lift it in place
by:
I had reservations about putting a class 3 hitch on,by myself,because of the weight. But with the help with {online}. I was able to do it myself.
by:
2022 Chrysler Pacifica
I'm giving this four stars because the hitch itself rules. Install instructions were absolutely terrible. I've got a 22 Pacifica Hybrid. The instructions said to widen the holes in the frame. I didn't need to do that, instead I found another video than the one on this page that showed how to modify the mounting bracket for the emissions sensor, so I did that. Way easier than widening the holes. Then when I went to mount it, there was a random bolt that didn't line up with the holes on the hitch. I cut that bolt off and it went up no problem. I am very experienced mechanically and have a ton of tools and this took me 4 hours. I'd say if you don't have a fully stocked tool bench, pay someone to install this.
by:
2019 Chrysler Pacifica
Following the video made it look easy but it only showed instructions on drivers side. When it came to the passenger side, that was time consuming and bruising. Now I know why the video didn’t include that side. But, I did get it put on with vehicle on the ground in 4 -1/2 hours. I’m 80 years old and it was 90 degrees outside. I’m okay. It looks good on vehicle.
by:
I purchased the hitch along with a bike rack on the same order. The associate on the phone advised that the two were compatible. Unfortunately, the rack shakes like crazy to the point that I don’t use it.
by:
Fast and great service.
25
282
true
Show More Reviews

See what our Experts say about this etrailer Trailer Hitch


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Zach D
Video by:
Zach D
Employee Thomas T
Video by:
Thomas T
Employee Ethan H
Video by:
Ethan H
Employee Joshua U
Video by:
Joshua U
Employee Daniel M
Video by:
Daniel M
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee John S
Video Edited:
John S
Employee Wilson B
Updated by:
Wilson B
Employee Shane H
Test Fit:
Shane H
Employee Ryan G
Test Fit:
Ryan G
Employee Aidan B
Test Fit:
Aidan B
Employee Kevin C
Test Fit:
Kevin C
Employee Bradley B
Test Fit:
Bradley B
Employee Jesse B
Test Fit:
Jesse B
Employee Scott A
Test Fit:
Scott A
Employee Kristina F
Written by:
Kristina F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924