See what our Experts say about this Yakima Roof Rack

• Will Yakima BaseLine FX Roof Rack Hold Hobie Outback on 2022 Nissan Altima
  Hi John; the Yakima BaseLine FX Roof Rack # Y59UV has a capacity of 165 lbs. It can definitely handle the weight of your Hobie Outback and will allow the use of a kayak carrier like the Malone MegaWing # MPG207. Make sure you double check the capacity of the roof on your Altima as well to make sure it is high enough to handle the kayak.
  view full answer...
• 2023 GMC Acadia Roof Rack and Cargo Box Recommendations
  The absolute best roof rack for your 2023 GMC Acadia with the bare roof is the Yakima BaseLine FX because it has a nice factory look but is also more robust so you get a great looking system that's also stronger. Here are the parts you'll need: - BaseLine FX Crossbars # Y59UV - Fit Kits # Y06138 and # Y06132 - Lock Core Kit # Y07204 (optional) If you were planning on using this for a cargo box then I highly recommend the Yakima SkyBox NX 18 # Y45AV. I really like this box because it...
  view full answer...
• Can the Yakima BaseLine Crossbars Handle the Weight Capacity of a Roof Top Tent
  The weight capacities listed on cross bars like the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV are the dynamic capacity, meaning while the vehicle is in motion. When you're parked and using your tent, the weight capacity is easily going to double or triple because the weight will be static over the axles. So with that being said, the BaseLine crossbars will easily be able to handle the weight of the two adults and the roof top tent. It's also worth mentioning that most, if...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for a 2003 Toyota RAV4
  Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4. Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185. These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories. Since you also are looking for a way to transport some kayaks, I'd recommend checking...
  view full answer...
• Recommended Roof Rack for a 2024 Volvo S90 w/ No Rails
  To add a roof rack to your 2024 Volvo S90, that does not overhang the side of your roof, you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y59UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• Length/Width of Yakima BaseLine FX Roof Rack Crossbars For 2019 Hyundai Santa Fe w/ Bare Roof
  Hi John; great choice going with the Yakima roof rack for your 2019 Hyundai Santa Fe with a bare roof, and the crossbars themselves are 2-3/4" wide x 1-1/8" tall for the Yakima BaseLine FX Roof Rack # Y59UV. That should allow you to clamp any accessory on them as they are standard size crossbars. To complete the set up for your' 19 Santa Fe you'll also need the BaseClip Fit Kit # Y06151 and # Y06154.
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Do 2020 Hyundai Palisade And Kia Telluride Use The Same Roof Rack Crossbars?
  Hello Terry, thanks for reaching out. It would be possible to use the same crossbars on a 2020 Hyundai Palisade and a 2020 Kia Telluride. The fit kits would be different, but it would be possible, for example, to use the 60" Yakima JetStream bars # Y00426 and BaseLine Towers # Y28TR on both vehicles. Here are the fit kits you would need for each one: 2020 Hyundai Palisade (without factory flush rails) - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - BaseClip Fit...
  view full answer...
• Can Yakima Round Crossbars be Added to 2013 Honda Civic
  Hey Charles, so Yakima did change their roof rack setups a few years ago but there are still components that will allow you to use your current Yakima round bars on your 2013 Honda Civic. You'd need the Baseline Towers part # Y28TR, two sets of # Y06125, and # Y03536.
  view full answer...
• Recommended Parts Needed To Install Yakima Round Bars to a 2015 Honda Civic Hybrid
  Hey Larry. You won't have to start all the way over but the only parts you'll be able to reuse are the round bars. Here are the rest of the parts you'll need to add a roof rack to your 2015 Honda Civic Hybrid: BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers item # Y06125 - x 2 RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03536 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR If you have any additional...
  view full answer...
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• What Kayak Load Assist Can I Use With My Lockrack For My 2016 Subaru WRX
  I do have a solution for you, but will not involve the Lockrack Loading Bar. You will still have to remove, or adjust the orientation, of the arms for this solution to work, but this method would be your only option. You can use the following items to help you load your kayak with the Lockrack Loading Bar. The Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 lbs, part # RR-RUSL. This load assist bar clamps to your roof top rack and it has a weight limit of 132 lbs....
  view full answer...
  
• Picking Between 50 and 60 inch Yakima Jetstream Roof Racks for 2021 Kia Telluride
  Going with a longer crossbar does give you more space to mount roof accessories and carriers but the longer bars do tend to get in the way a little more and create a little more wind noise. So really it comes down to considering how many things you plan to carry on the roof rack and how wide they might be. Now that said the 60 inch Jetstream rack Yakima offers part numbers # Y00426, # Y28TR, # Y06125, and # Y06165 is the correct rack for if you have a naked roof and the 50 inch rack part...
  view full answer...
• How to Determine Correct Roof Rack For 2024 Kia Telluride
  I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
  view full answer...
  
• 2022 Kia Telluride Roof Rack Recommendation for 2 Thule Hullavator Pro Kayak Carriers
  Yes, you can fit 2 of the Thule Hullavator Pro # TH898 on your 2022 Kia Telluride. They use up 28-1/2" of crossbar space and weight in at about 40 lbs each so we definitely want to keep that in mind as we look into roof rack solutions. I recommend going with a Yakima JetStream roof rack system because it's the only system where the bars will be long enough to accommodate 2 of the Hullavators (not to mention it is a nice roof rack system). The correct roof rack kit depends on if you have...
  view full answer...
• Recommended Roof Rack for 2020 Kia Telluride
  There are a lot of great options for roof racks for your 2020 Kia Telluride, but unfortunately, none of them meet the 220 lbs weight capacity you are looking for. 165 lbs is a common weight limit for roof rack systems. This is usually because of the limitations of the mounting system. Your vehicle roof and typically the actual crossbars themselves can be rated for 220 lbs but the mounting feet that attaches the bars to your roof might be rated for less, so this becomes the limit for the...
  view full answer...
• Recommended Roof Rack System For 2021 Kia Telluride LX with Naked Roof
  The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
  view full answer...
• Can You Install Roof Rack System On 2013 Toyota Camry With Sunroof
  You can definetly install a roof rack system onto your 2013 Toyota Camry with a sunroof. I recommend the Yakima Roof Rack System which consists of four items. Yakima CoreBarCrossbars # Y00421, Yakima BaseLine Towers # Y28TR, Fit Kit # Y06119 and Fit Kit # Y06125. This system will allow you to carry multiple accessories like cargo carriers, kayak carriers, and bike racks on the roof of your vehicle and using the Yakima Same Key System Lock Cores # Y07204 will lock the roof rack to your...
  view full answer...
• Yakima Q-Clips for a 2009 Toyota Tacoma Double Cab
  Thanks for sending us a picture! The 2009 Toyota Tacoma requires 2 different sets of Q Clips when installing a Yakima roof rack. First, the front clips will be Q-127 and rear clips are Q-128. The Q Clip system has been discontinued by the manufacturer so if you don't have access to old parts, then I recommend using the round bars and adding the following parts to complete the system: # Y28TR, # Y03536, # Y06125 and # Y06128.
  view full answer...
  
• Recommended Roof Rack for Roof Top Tent on a 2022 Kia Telluride
  I have a couple of options for roof racks depending on whether or not your 2022 Kia Telluride has the flush mounted rails that run front to back. If your Kia has the flush mounted rails that run front to back you will want the 2022 Kia Telluride Roof Rack by Rhino Rack. The Roof Rack Includes: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # RRVA137B-2 Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4 item # RR94DY If...
  view full answer...
• Recommended Roof Rack and Cargo Box for 2022 Kia Telluride
  For your 2022 Kia Telluride I recommend the Yakima CoreBar rack which includes part numbers # Y00422, # Y28TR, # Y06125, and # Y06165. This rack has an aerodynamic, teardrop shape to reduce noise and vibration and reduces drag to help maintain fuel efficiency. For a roof box, I recommend the Thule Motion XT Rooftop Cargo Box # TH629806. It has a carrying capacity of 18 cubic feet and can hold up to 165 lbs. Since the roof rack can hold 220 lbs, it will be able to handle the weight of any...
  view full answer...
• Will the 60-Inch WingBar Evo Crossbars Fit My 2022 Kia Telluride
  The reason why 60-inch WingBar Evo Crossbars # TH711520 are not rated to fit your 2022 Kia Telluride is because the WingBars have attachment slits on the bottom where it connects to the Evo Flush Rail Feet # TH710601 with the Fit Kit for Thule Evo Flush Roof Rack Feet - 186095 # TH77JV. If the crossbars are too long and your roof is too narrow, the slit where the feet connects to the crossbar will not extend far enough to connect, which is the case with the 60-Inch Wingbars. I went ahead...
  view full answer...
  
• How To Reuse Yakima Q-Towers on a 2018 Volkswagen Golf GTI
  I do have an option for you but I don't have any way for you to use your old Q-Towers on your new 2018 Volkswagen Golf GTI because the clips are just not available. The best option you have to reuse some of the components you have now is to purchase new clips part # Y06123 for the front and part # Y06125 for the rear, new feet part # Y28TR, and the adapter part # Y03536. I am not sure what you are asking in regards to Thule but most of their accessories will work with the Yakima round...
  view full answer...
• Recommended Roof Rack for a 2020 Kia Sportage w/out Roof Rails
  Yes, we do have options to add a roof rack to your 2020 Kia Sportage without roof rails. I recommend the Kia Sportage Roof Rack by Yakima. You will need the following parts: Yakima HD Crossbars 500 lbs Capacity Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Yakima Roof Bike Rack Recommendation for 16 Kids Bike Wheels on a 2018 Subaru WRX Sedan
  As far as Yakima racks that work with 16" and 20" wheels, the best and only option is the fork-mounted Yakima HighSpeed # Y02115. With this rack, I confirmed with Yakima that it does not require a minimum or maximum wheel diameter as long as the bike's tires do not exceed 5" wide and the bike's wheelbase does not exceed 48". As far as compatibility with the kid's bike, it is compatible with 9 mm x 100 mm, 12 mm x 100 mm, 15 mm x 100 mm, 15 mm x 110 mm, 15 mm x 135 mm, 15 mm x 142 mm, 15...
  view full answer...
• Yakima Round Bar Roof Rack Compatible with 2012 Honda Civic 4 Door
  For your 2012 Honda Civic 4 door, you are correct that the rear clips Q131 are obsolete. I confirmed this with my contact at Yakima. Unfortunately that means there is not a fit for the Q Towers on your vehicle. If you want to use your round bars, you still can do that, but here is the complete round bar kit that will fit your vehicle: Round 58" CrossBars # Y00409 (or your current bars if long enough) BaseLine Towers # Y28TR Same Key System Lock Cores # Y07204 RoundBar SL Adapter...
  view full answer...
• Recommended Feet And Fit Kit For Installing 53 Thule AeroBlade Crossbars On 2012 Honda Civic
  I would be happy to recommend the correct feet and fit kit required to install your 53" Thule AeroBlade Crossbars on your 2012 Honda Civic. If you Civic is a sedan you will need the Evo Clamp Feet for Thule Crossbars # TH710501 and Fit Kit # TH145180. If your Civic is a coupe there is not an option for mounting any Thule crossbars so you will need to replace them. I recommend going with the Yakima Roof Rack System which uses Crossbars # Y00426, Crossbar Feet # Y28TR, Fit Kit # Y06125,...
  view full answer...
• Crossbar Spread For Yakima Roof Rack on 2017 Volkswagen Golf
  I checked with Yakima to verify their crossbar spread dimension of their rack that consists of part numbers # Y00421, # Y28TR, # Y06123, and # Y06125 and it is 32 inches between the front and rear bar on center. From the front windshield to the front crossbar it will measure 7 inches. You can use these dimensions to find out exactly where the roof rack will end up on your roof. I attached a picture that I took from Yakima's site to verify this as well.
  view full answer...
  
• Crossbar Recommendation Options For A 2022 Kia Telluride
  For your 2022 Kia Telluride if your vehicle does not have factory roof rails, then I recommend taking a look at the: -Yakima JetStream Crossbars # Y00426, with the towers # Y28TR, and the fit kits # Y06125 & # Y06165. These cross bars measures 60" long, 3-1/8" wide, 1" tall, and has a maximum weight capacity of 165-lbs. Or, If your vehicle flush mounted rails, then I suggest taking a look at the: -Thule WingBar Evo Crossbars # TH711400, with the rail feet # TH710601, and the fit kit...
  view full answer...
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Components Needed To Mount Yakima CoreBar Crossbars To A 2023 Toyota Tacoma
  Hey Mike, In order to mount your Yakima CoreBar crossbars on your 2023 Toyota Tacoma you'd need the following components depending on the following factors: Access Cab - Naked Roof: BaseLine Towers # Y28TR BaseClip Fit Kit # Y06128 BaseClip Fit Kit # Y06145 Double Cab - Naked Roof: SkyLine Towers # Y53TR Landing Pad 24 # Y74FR Double Cab - Raised Rails: TimberLine Towers # Y33TR
  view full answer...
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Kayak Carrier Recommendation for Hobie Mirage Compass Fishing Kayak
  Since your Hobie Mirage Compass fishing kayak weighs 87 lbs you're either going to have to use a post-style carrier like the Yakima BigStack # Y04041 or use 2 sets of a J-Style carrier like the etrailer J-Style Kayak Carrier # e98878. I recommend going with 2 of the J-Styles simply because it will be easier to load an individual kayak on each one, especially with your heavier kayak. If you don't already have a roof rack then I recommend using a Yakima CoreBar roof rack. The correct parts...
  view full answer...
• Correct Yakima SKS Lock Core Kit for Yakima HD Roof and OverHaul HD on a 2016 Toyota Tacoma
  That is an excellent setup and I know you'll be happy with that on your 2016 Toyota Tacoma. I'll list out all of the parts you'll need (just so you have them all in one place) but I did want to say while the OverHaul HD does come with locks, we don't have a way to choose the correct lock cores that come in the packaging so your best bet is to go with the 6-lock core SKS # Y07206 because it gives you matching cores for the 2 needed for the ladder rack and then the 4 needed for the roof rack. With...
  view full answer...
• Which Yakima Roof Rack System For 2021 Toyota Tacoma and Shell
  To mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers # Y28TR, Round 48" Crossbar # Y8810021, Round Bar Adapter # Y03536, and Base Clip Fit Kit # Y06128 if you are mounting the crossbar on the rear of the vehicle, or Base Clip Fit Kit # Y06145 if you are mounting the crossbar on the front of the vehicle. For your shell you can use your existing Yakima Round Crossbars or Round 48" CrossBars for Yakima Roof Rack System # Y00408. In addition you will...
  view full answer...
• Yakima Q-Clips for a 2009 Toyota Tacoma Double Cab
  Thanks for sending us a picture! The 2009 Toyota Tacoma requires 2 different sets of Q Clips when installing a Yakima roof rack. First, the front clips will be Q-127 and rear clips are Q-128. The Q Clip system has been discontinued by the manufacturer so if you don't have access to old parts, then I recommend using the round bars and adding the following parts to complete the system: # Y28TR, # Y03536, # Y06125 and # Y06128.
  view full answer...
  
• Will Yakima OffGrid Cargo Basket Fit on 2018 Toyota Tacoma Roof?
  Absolutely! The Yakima OffGrid Cargo Basket # Y07138 is 44" long by 40" wide. From my experience with the Tacoma and some research, the roof size is about 60" long and 52" wide on the double cab. The usual aftermarket roof rack crossbars for the 2018 Toyota Tacoma like # Y00425 are 50" long. This means the Yakima OffGrid will definitely fit on your roof. I attached my video review and install of this rack on a 2020 Toyota Tacoma. It's also a double cab which is an extra point for you since...
  view full answer...
• Yakima Roof Rack Recommendation for Cab and Camper Shell on 2022 Toyota Tacoma
  For a Yakima roof rack system on the cab and camper shell of your 2022 Toyota Tacoma I recommend going with the JetStream crossbars. I'll break down what parts you need for each section so it's easier to know what is paired together. Truck Cab 50" JetStream Bars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06145 BaseClip - # Y06128 Camper Shell 50" JetStream Bars - # Y00425 60" Tracks - Y01135 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you'll need 2 of these) I also recommend...
  view full answer...
  
• Yakima Roof Rack Components Fit HD Bar Setup on 2020 Toyota Tacoma with Naked Roof
  Yakima does have an HD roof rack that fits your 2020 Toyota Tacoma with a naked roof but the correct towers for your vehicle are the Baseline towers and not the Skyline. What you would need is the following components # Y01156, # Y28TR, # Y03541, # Y06145, and # Y06128. The fit kit you mentioned does not fit your truck. Since you already have the bars you may not need the part # Y01156 as well.
  view full answer...
• Rack for Rooftop Tent with Tonneau Cover for 2017 Toyota Tacoma
  The best way to mount a roof-top tent to your 2017 Toyota Tacoma with a Truxedo LoPro tonneau cover is using a roof rack like Yakima's CoreBar Crossbars Roof Rack System: # Y00421, # Y28TR, # Y06145, # Y06128. With the way your tonneau cover secures to your bed and the lack of stake-pockets on the Tacoma there isn't a ladder rack available for your Tacoma that works together with your tonneau. I like the CoreBar system because it has a high capacity and it looks good. One thing that...
  view full answer...
• Solution for Transporting Kayak on 2017 Toyota Tacoma with Extang Encore Tonneau Cover Installed
  I have a couple possible solutions for you to transport your kayak with your 2017 Toyota Tacoma, however there is not a standard ladder rack available that is compatible with the Extang Encore Tonneau Cover. This is because the hardware for the Encore Tonneau Cover partially covers the top of the bed rails and any ladder rack will either require access to the inside of the bed rails or complete access to the stake pockets. The first option for your setup is to add a rail system and crossbars...
  view full answer...
• Roof Rack to Fit a 2018 Toyota Tacoma with Fixed Mounting Points
  If you definitely want a Yakima roof rack then the clamp-style attachment is all that is available at this time. For their system I recommend CoreBar system using BaseLine towers # Y28TR, fit kits # Y06145 and # Y06128, and then either the 50 inch, part # Y00421, or 60 inch, part # Y00422, crossbars. Since your 2018 Toyota Tacoma has the fixed mounting points there are Rhino-Rack systems that fit. I recommend the Vortex Aero bars, part # RRVA126B-2, with # RRRLT600 legs, and # RRQMFK08-2...
  view full answer...
• 2018 Mazda CX-9 Roof Rack For A Naked Roof
  If you have what we call a naked roof, meaning no raised rails or flush rails, you cannot choose where to place the rack on the roof of your 2018 Mazda CX-9. Here is a setup for your car on a naked roof. The rack would consist of three separate parts; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06138, BaseClip...
  view full answer...
• Parts Needed to Install Yakima Round Bar Roof Rack on 2015 Toyota Tacoma Access Cab
  For your 2015 Toyota Tacoma Yakima has a round bar roof rack that is a confirmed fit but it uses the Baseline towers and not the Skyline towers so you would need the part # Y00409, # Y28TR, # Y03536, # Y06125, # Y06128. This is a 58 inch bar setup and based on install pictures I've seen of this rack on a similar Tacoma a shorter 48 inch bar would not fit.
  view full answer...
• Roof Rack for 2013 Toyota Tacoma Double Cab to Carry Two Hullavators
  To carry two Thule Hullavators kayak carriers # TH898 on the roof of a vehicle you'd need to have a roof rack with longer bar lengths as each of these takes up about 28.5 inches of bar space. So your best roof rack setup for your 2013 Toyota Tacoma double cab would be the part # Y00426, # Y28TR, # Y06125, and # Y06128 which has 60 inch long crossbars that the Hullavator could fit on.
  view full answer...
• Can I Use Yakima Crossbars And Skyline Towers On A 2020 Toyota Tacoma Double Cab
  I can certainly point you in the right direction. Since your 2020 Tacoma Does not have the fixed mounting points, you will not be able to re-use your Skyline Towers. The SkyLine Towers can only be used with fixed mounting points, flush rails and track systems. You will however, be able to re-use your Yakima crossbars. We recommend a minimum 50" crossbar for the 2020 Tacoma Double Cab. So as long as your crossbars are 50" (or longer), we can set you up. You will need the following parts...
  view full answer...
• Parts Needed to Complete Yakima Roof Rack on a 2008 Toyota Tacoma
  Since it looks like you have a Q-towerYakima crossbar setup you would only need the correct fit kit so that it could install on your 2008 Toyota but the clips for those towers are no longer available. Instead you will use the following: BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06125 and # Y06128 Hopefully the crossbar is at least 58 inches long. Otherwise you would need the part # Y00409 as well.
  view full answer...
  
• Parts Needed to Install Yakima Round Bar Roof Rack on 2016 Toyota Tacoma Double Cab
  Since the Q Tower style of Yakima roof rack is being phased out they don't have a set of Q Clips that fit a 2017 Toyota Tacoma double cab at this time but we do have a solution that would work for you. If you have a set of round bars like the part # Y00408 they recommend for your vehicle you can piece together the rest of the roof rack that you'd need. You'll want the BaseLine Towers part # Y28TR, RoundBar SL Adapter # Y03536, the BaseClip kit part # Y06145, and BaseClip kit part # Y06128.
  view full answer...
• Roof Rack or Truck Bed Rack for 2022 Toyota Tacoma Double Cab
  For your 2022 Toyota Double Cab you could go with a Thule roof rack like the Wingbar Evo # TH711420, # TH710501, and # TH145107 to carry your bikes with a bike rack, or you could go with the bed rack option from Yakima the BedRock HD # Y01160-58 if you preferred to carry them there. I like the bed option because you won't have to lift your bikes as high and the bikes would be shielded slightly from the wind behind the cab. If your truck bed is clear this would be what I would go with. If...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2018 Toyota Tacoma Couble Cab
  You'd need a roof rack confirmed to fit your 2018 Toyota Tacoma Double Cab with longer crossbars like the Yakima Corebar Rack part numbers # Y00422, # Y28TR, # Y06145, and # Y06128 which has 60 inch long crossbars. You could easily use a SweetRoll # Y04074 for each of your kayaks then with this rack. This leaves your truck bed open for the tonneau cover and would work well.
  view full answer...
• Aero Bar Roof Rack that Fits 2022 Toyota Tacoma Access Cab
  Since Rhino Rack states it can't fit the Access Cab models that would be the correct fit info. So for a similar roof rack that does fit the Access Cab of your 2022 Toyota Tacoma we have the Yakima JetStream part numbers # Y00425, # Y28TR, # Y06145, # Y06128.
  view full answer...
• Ladder Rack and Roof Rack Recommendation for a 2013 Toyota Tacoma
  The Yakima Roof Rack in the video you referenced has been discontinued by the manufacturer. If you have the double cab, then I recommend the following parts for a Yakima roof rack: # Y00426, # Y28TR, # Y06125, and # Y06128. The locks to secure this are # Y07204. This roof rack could be used in conjunction with a truck bed ladder rack like the Thule Xsporter part # TH500XT for your 2013 Toyota Tacoma. This is an adjustable height ladder rack that will let you perfectly match up the height...
  view full answer...
• What Yakima Roof Rack Do You Recommend For My 2022 Toyota Tacoma With A Camper Shell
  You will be able to put Yakima tracks on your shell. The rack will consist of the following: Yakima 42" Tracks for Roof Racks, part # Y01126 Yakima CoreBar Crossbars, part # Y00421, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. The crossbars have a weight limit of 220 lbs, but check your shell owner's manual to find out its weight limit. Your racks maximum...
  view full answer...

Do you have a question about this Roof Rack?