These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars work with most clamp-on accessories. Installs on your vehicle's naked roof. Great Prices for the best roof rack from Yakima. Yakima BaseLine Roof Rack for Naked Roofs - CoreBar Crossbars - Steel - Black - Qty 2 part number Y78RB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (44008)
Q & A (0)
Related Parts
Photos
Yakima Roof Rack
- Y78RB
Highlights
Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
Complete Roof Rack System: Includes 2 CoreBars, 4 BaseLine towers, and a custom fit kit for your vehicle.
Strong Yet Quiet Design: Steel CoreBars feature an aerodynamic shape for heavy-duty, low-noise hauling.
Ready for Accessories: Works with most clamp-on carriers for kayaks, cargo boxes, or camping gear.
Corrosion Protection: Black vinyl coating helps shield the bars from rust and wear over time.
Solid Load Capacity: Supports up to 220 lbs while observing your vehicle’s maximum roof load limit.
Features to know about
Stay Stable on Every Haul: Heavy-Duty Steel CoreBars
When you’re carrying something like a kayak or a cargo box, strength and stability are everything. These CoreBars combine the toughness of steel with an aerodynamic shape that keeps them solid and quiet at highway speed. Each crossbar measures 50" long x 2-3/4" wide x 1" tall and supports up to 220 lbs (always follow your vehicle’s roof load limit). The black vinyl coating helps prevent rust so your rack stays strong through years of outdoor use.
Keep the Ride Quiet: Aerodynamic Shape for Less Wind Noise
There’s nothing worse than a loud roof rack on a long drive. The aero-style CoreBars cut through the air smoothly, helping reduce the wind noise that can build up on standard square bars. You’ll notice a calmer ride whether you’re heading to the campsite or cruising down the highway with a cargo box on top.
Mount What You Need: Works with Clamp-On Accessories
From kayaks and canoes to cargo boxes, these bars are built to work with most clamp-on accessories. That means your existing carriers for bikes, skis, or water gear can mount right up without special adapters. The full-length design gives you more usable bar space for multi-sport setups or larger loads when you need it.
Set It Up Yourself: Complete System with Custom Fit
This package includes 2 CoreBars, 4 BaseLine towers, and a custom fit kit for your vehicle’s naked roof. Everything you need for install comes right in the box—no extra pieces required. It’s designed for a secure hold that stays put while protecting your roof’s finish. If you want extra peace of mind, you can add Yakima Same Key System (SKS) lock cores, sold separately, to help deter theft of the rack when parked.
Specs
Dimensions
Crossbar dimensions: 50" long x 2-3/4" wide x 1" tall
WARNING: This product may contain Phthalates and Antimony Oxide which are known to the State of California to cause cancer. For more information, visitwww.p65warnings.ca.gov
Customers Who Purchased This Roof Rack Also Bought...
I have a 10th gen Civic sedan and I was dying to get the perfect roof rack set for my car. At the time of my purchase there was not many visuals of what the rack system looked like on this car.
Overall I love how it looks on my car! During This COVID pandemic I have been camping more, and this is the perfect foundation! First off, the 46in fairing is the perfect fit for the 10th gen civic! Wind noise is low also with the help of the aerodynamic crossbars. My main concern was the fuel efficiency. On long road trips I still average 38-40 mpg with the rack on. My daily commutes I average 34 mpg without Econ on. 2905446
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to. 2905406
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door. 2905399
I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well! 2905408
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight. 2905438
Great product haven’t had any issues with it. Would highly recommend that anyone that’s looking for a roof rack system and a great seller at etrailer 3270966
Brooke M.
2/26/2025
Thanks, Eric! Glad the crossbars have been working well for you :)
by:
Lisa
04/12/2019
Honda
Ridgeline
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water. 2905394
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done! 2905387
Timely delivery of my order, as usual! Easy to install on my 2015 4Runner. After I had the mounts ready and put on both bars, I installed the front one and fine-tuned it, the second took even less time then. I now have the ability to carry up to 3 kayaks, perfect! etrailer is a great company! 2905397
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases. 2905379
One bar slid out on our first road trip. The "grip" that it slides into can't be adjusted. I am in communication with Yakima about this as Etrailer said that's the route that I would need to go. Very frustrating. 3284356
by:
Todd
06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer. 2905518
I am thrilled this got delivered sooner than anticipated! It was quite easy to install once you started actually putting it together and measuring everything out. I like that this can easily be removed and installed onto the vehicle.2905374
Great UX for finding the options matching my car, and the baseline towers work great. Simple straightforward site, will plan to use them again when needed.
For those also buying crossbars for cars without roof rails, recommend taking a silver sharpie and marking the placement of the crossbars on the weather seal at the top of the door openings. Makes putting them back on way less of a hassle if you don’t want them on 24/7. 3220931
by:
Alex
11/05/2018
Customer service was excellent, they called me to tell me one item was backordered and how long it would be. Package was shipped with enough packing material. Install was pretty easy, some of the Yakima measurements in the manual are a couple inches off but no big deal. This will be used to carry a box for when the family takes trips. Can pile all the luggage up top and have more room in the car. I would recommend the Yakima corebar roof rack and etrailer! Their price was lower than 2 other sites I checked. 2905358
by:
Mike
06/20/2018
2017
Ford
Edge
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process. 2905400
by:
Joe F.
07/01/2019
Great product and Sales Support from etrailer.
I bought this for my Son as a Grad/BDay gift for a Honda HR-V which has slightly odd roof/door shape
He installed it himself said the install was straightforward but the instructions could use a little improvement.
etrailer Sales Support was great, I was a little concerned about getting the right parts and the return policy. Olivia was great to work with, she offered recommendations and matched the parts to the type and vehicle it was to be installed on along with a kayak mount.
All the parts arrived in mint condition with no missing pieces.
I'll for sure return to etrailer on future purchases. 2905367
by:
Diane
04/11/2021
Wonderful service from Kimberly at etrailer.com. I had ordered a roof rack in December for I car I had on order. Ultimately I purchased a different vehicle more than 3 months later and the roof rack and mounting parts were not compatible. I had no problem returning the unopened products and just needed to pay the postage. Kimberly made the process easy and seamless, making sure to send the new Yakama cross bars and necessary parts. It fits beautifully on my new car and setup was fairly simple with video support and step-by-step instructions. 2905405
by:
Jenny
05/26/2020
Volkswagen
Golf
Relatively easy to install on my VW Golf (etrailer videos are very helpful) and sooooo useful with my Yakima skybox. Not much road noise, so I can leave the rack on even when I am not using it. 2905441
by:
Andy
07/27/2020
Great product! Relatively easy install, had the racks on for a few days now with no issues. 2905369
antastic company and wonderful service, one of the racks was the wrong size for my car so they were able to help find the right size for my Car. Absolutely great company, with fast shipping and just the products I needed for my Car!. Very helpful, and overall smooth transaction and service. I will order from this company again very soon!. shipping came in a very strong and solid box. I highly recommend buying from them!. 10/10 all the way!. 2905432
by:
Joshua
11/19/2020
antastic company and wonderful service, one of the racks was the wrong size for my car so they were able to help find the right size for my Car. Absolutely great company, with fast shipping and just the products I needed for my Car!. Very helpful, and overall smooth transaction and service. I will order from this company again very soon!. shipping came in a very strong and solid box. I highly recommend buying from them!. 10/10 all the way!. 2905354
by:
Hung
09/27/2021
2004
Toyota
Camry
I have a 2004 Toyota Camry, my purpose is to purchase this Yakima Baseline System for Rooftop tent. My 23Zero rooftop tent weighs 130 lb, so far it's super solid. I did some minor adjustments based on the shape and level of the roof when mounting it. 2905375
by:
Dave
02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!! 2905516
by:
John P.
08/29/2018
2017
Volkswagen
Golf
Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on.
etrailer.com shipped these out quickly and all parts arrived without damage. 2905433
Hi Roger!
I see you placed an order for the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B already, but I still wanted to get you an answer to your question.
While some crossbars can be cut down to size, the ones included with the # Y02-480B cannot. The bottom of the bars have a short track in them for the towers to mount in, but they do not go all the way across the bar (see included image). Cutting the bar down can and will shorten that space... view full answer...
In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity... view full answer...
If you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches.
I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the... view full answer...
Yes, I checked with Thule and for the factory crossbars of your 2018 Subaru Outback Wagon the DockGrip part # TH895 is a confirmed fit and will work well. view full answer...
Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts:
Crossbars # Y00408
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
2 of BaseClip fit kit # Y06146 view full answer...
The top channel on the JetStream bars have the advantage of offering an easier/cleaner way to attach roof rack accessories. A lot of roof rack accessories are now being made to attach to a channel on the top of the bar. The CoreBars are a less expensive and still a really great bar but it comes down to what type of attachment you prefer.
If you let me know what vehicle you have I can help get all of the parts together to install either style of rack on your vehicle. view full answer...
There is a solution for you, but the issue with the BoatLoader EVO the crossbar spread as well as its 80 lb weight capacity, which is less than your 87 lb fishing kayak.
Instead, for your 2011 Chevy Equinox with raised side rails I recommend the Rhino-Rack Roof Rack, which will give your Equinox a very functional, durable rack that will allow you to use a load assist. This roof rack uses aero bars and consists of:
- Rhino-Rack Vortex Aero Crossbars # RRVA126B-2
- Rhino-Rack SX Series... view full answer...
The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity.
Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle. view full answer...
The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps.
The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option.
That means you'll want the Yakima Skyline Aero Bar kit part numbers... view full answer...
Hello David,
Congrats on the new Lexus, I really like the new grill designs I have been seeing on the SUV's. I understand your concern with the noise as some systems can be quite noisy. When it comes the the rail systems you definitely get what you pay for. I am showing that the 2024 Lexus LX 600 comes with the flush mounted rails (please refer to the image that I attached) so you will want the Thule WingBar Evo Roof Rack for Flush Rails - Aluminum - Black - Qty 2 # TH49GA (for silver... view full answer...
The Thule roof racks available for the 2018 Subaru Outback have a capacity of 110 pounds no matter which bar style is being used. There are roof racks that are rated higher though so to maximize the capacity of the vehicle (which according to the owner's manual is 176 pounds on models that have factory side rails that run front to back or 150 pounds for models with crossbars integrated into the rails).
All of the Yakima roof rack options are rated for 165 pounds. For a Yakima roof rack... view full answer...
Hello Mike. According to Yakima, the SightLine Towers are the only option for the 2024 Hyundai Tucson. You can use the Corebars, and a 50" bar is recommended for the 2024 Tucson. You will also need the SightClip 25 # Y27AR and a set of SightLine Towers # Y64AR.
We do have some videos showing installation of the SightLine roof rack. I have provided links to a couple different videos for you below. view full answer...
I am sorry the older Hullavator 897XT you own can not be converted to mount on Yakima CoreBar Crossbars like item # Y00421 because there is no t-slot. I confirmed this information with Thule.
The only solution I have for you is to upgrade to the new Hullavator item # TH898 you were looking at. view full answer...
For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed.
For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached. view full answer...
I went ahead and reached out to my contact at Rhino-Rack, and she confirmed that the Rhino-Rack Roof Rack Legs - Gutter Mount - 5-15/16" Tall # RL150S13-3 will technically attach to a Rhino-Rack Pioneer platform. However, Pioneer Platforms are customized to fit certain roof dimensions, and I cannot recommend which platform you will need for your vehicle.
In order to give you the proper fitment and recommendation, please feel free to respond to this answer with the year/make/model/roof... view full answer...
Hey A, for your 2025 Toyota RAV4 with factory flush rails you can use the Yakima SkyLine Roof Rack for Fixed Mounting Points # Y55FB which includes the Yakina round bars, the towers, and the round bar adapter. These towers will attach directly to your flush rails on your RAV4, so you won't need anything else to get it to work.
Let me know if there is anything else I can do for you! view full answer...
Hello Tonya -
Thanks so much for letting me know that your 2017 Honda Civic is a 4-door sedan. Once I know if you have a center exhaust on your vehicle, I can go ahead and recommend some great 2-bike racks for you! view full answer...
Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option.
In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536.
I know it's not ideal, but due to the uniqueness of your crossbars that is your best option. view full answer...
The Thule Hullavator Pro Kayak Carrier # TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit # TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work correctly and avoid contacting your vehicle. I have attached a photo showing how to make sure your CoreBar is long enough.
If you happen to need longer CoreBar crossbars we have them available here:
50" - # Y00421
60" - # Y00422
70" - # Y00423
80" - # Y00424 view full answer...
In order to mount your Yakima Space Cadet Cargo Box to the roof of your 2008 Honda Odyssey you will indeed need to add crossbars. For your Odyssey that features the factory raised side rails I recommend the Yakima CoreBar System. This roof rack consists of # Y00421 for the two 50 inch CoreBar Crossbars and # Y33TR for the TimberLIne Towers that will attach to the side rails.
I have attached a short video demonstration on this roof rack that you can check out.
As long as you still have... view full answer...
The Timberline is actually the towers # Y33TR, so you will either have the CoreBar crossbars # Y00421 or the JetStream # Y00426. You can trim these bars to a shorter length and I do recommend using a new hack saw blade to do so. The aluminum crossbar will cut easily so you will want to make sure you have a very straight cut and take it slow or you would easily mar your bars. Make sure you double check your fit before making any cuts. view full answer...
There are a couple of differences between the two. The JetStream bars like # Y00425 are made of extruded aluminum while the CoreBars such as the # Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has a higher capacity. The primary difference is that the JetStream bars feature the T-Slot channel at the top that allows quick and easy accessory installation, while accessories used with the CoreBars would need to clamp around the crossbar.
The... view full answer...
In order to mount the Thule Motion XT XL # TH629806 on the factory flush rails of your 2017 Lexus GX 460, I recommend the Yakima CoreBar Crossbars - Steel - Black - 50" # Y00421. One of the great features of the CoreBars is that it combines the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. The Thule Motion XT XL will be able to clamp onto the CoreBars.
For a complete roof rack system for your 2017 Lexus GX 460, I recommend these... view full answer...
The Yakima Railgrab towers were phased out before being tested with the flush mounted rails that run front to back on your 2019 Subaru Outback Touring. The round bars can be reused if desired using adapter # Y03536 but the towers you need are the RidgeLine Towers for Yakima Crossbars # Y00145 and then you need fit kit # Y06028. I recommend using locks # Y07204 to secure your system.
If you don't want to reuse the round bars, then you can forget the adapter and add the Jetstream crossbars... view full answer...
Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord.
If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference. view full answer...
Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise.
Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well. view full answer...
Hey, Nick!
Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle.
I... view full answer...
According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for.
If you determine that you have fixed mounting points, I recommend the following setup:
- Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #... view full answer...
There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way.
I've... view full answer...
As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch.
In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit... view full answer...
There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails.
I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof.
The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for... view full answer...
There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof.
The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists... view full answer...
Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well.
As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends... view full answer...
Hi Hamza,
Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components:
Yakima JetStream Crossbars # Y00425
BaseLine... view full answer...
Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199.
Then for a square bar roof rack the Thule Portage part # TH819 would work great. view full answer...
For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel. view full answer...
I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts:
- Yakima JetStream Crossbars - Aluminum... view full answer...
Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure.
If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185.
You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350.
If you can tell... view full answer...
The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack.
The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius... view full answer...
Hi Tom! I just got to this one so I'm guessing you're going with the Thule Hullavator Pro # TH898 for your setup. I don't have the exact measurement for the 60" bars but it looks like it is too close to call. It will be 4-8" on the top. The 70" bar setup would be best, and it won't be too wide for your truck. Once again you will need the following:
-BaseLine Towers for Yakima Crossbars # Y28TR
-BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185
-Yakima JetStream Crossbars... view full answer...
Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts:
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item... view full answer...
For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA
Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427
The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs.... view full answer...
The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip... view full answer...
Hello Zeke,
So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts:
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit # Y06188
- BaseClip... view full answer...
The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan.
I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and... view full answer...
The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those... view full answer...
The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great.
I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and... view full answer...
Hey, Nick!
Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle.
I... view full answer...
For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back.
My recommendation for you consists of the following Yakima parts:
JetStream Crossbars - Aluminum - Black - 50" Long # Y00425
BaseLine Towers # Y28TR
BaseClip Fit Kit (front) # Y06159
BaseClip Fit Kit (rear) # Y06143
I also recommend adding locks # Y07204 view full answer...
Hello Ed, thanks for reaching out. It is possible to use Yakima round bars on your 2018 Toyota Prius Prime. Yakima recommends a 48" bar for the 2018 Prius, so as long as your bars are 48" or longer they can be used. Aside from the bars, you will need the following:
- BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06123
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06169
- RoundBar... view full answer...
The Curt Trailer Hitch Receiver # C11550 is designed for a 2019-2021 Hyundai Veloster unless it is the N model. Since Hyundai is only making the N model starting with the 2022 model year we still have yet to see a hitch designed to fit this vehicle, but I could see it potentially happening if the demand is high enough.
To transport something with your 2022 Veloster N you either need a hitch that is fabricated to fit your vehicle or you can use a roof rack. I recommend going with the Yakima... view full answer...
For your 1999 Honda Civic Coupe, you will need the SportRack Semi Custom Roof Rack # SR1003 along with the Short-Roof Adapter # SR1116. This is required for you to have the strength and stability needed on your 2 door Civic because of the short roof and curved roofline.
If you want to have a taller kit, I recommend using the Yakima Roof Rack consisting of:
Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 #... view full answer...
We do not have any hitch mounted spare tire carriers that will fit a Class I hitch like you have but we do have one option if you'd consider a roof rack mounted carrier. You can use the Spare Tire Carrier for Yakima Roof Cargo Baskets # Y07076 to secure a spare on a Yakima roof basket like the LoadWarrior part # Y07070.
You'd need to install a roof rack on your 2018 Toyota Prius Prime like the Yakima CoreBar part # Y00421, # Y28TR, # Y06123, and # Y06169 which is a confirmed fit that gives... view full answer...
There are a few different length options of crossbars that are confirmed to fit your 2019 Jeep Cherokee.
A great 50 inch crossbar option is the Yakima JetStream Crossbars # Y00425 which are an aluminum aero bar that has a weight capacity of 150lbs. If your Jeep has the factory installed rails the run from to back you will need the Yakima Timberline Towers # Y00147, or the Yakima BaseLine Towers # Y28TR, Yakima BaseClip Fit Kit # Y06123, and Yakima BaseClip Fit Kit # Y06159 if you do not... view full answer...
The Yakima BaseClip Fit Kit # Y06123 is for the front and the Yakima BaseClip Fit Kit # Y06170 is for the rear. Then you can install your Yakima BaseLine Towers Y00146 and then whatever Yakima crossbars you have. view full answer...
Yes, but exact measurements will depend on what kind of roof rack you have and where the bars are positioned. A good example is the Yakima Roof Rack system with parts # Y00421, # Y28TR, # Y06123, # Y06169.
From the front bar to the line where your roof and the hatch meet measures 58" while the Inno Wedge 660 # INBRM660WH requires that distance to be at least 48-1/2" for clearance - so you'll have roughly 9-1/2" of clearance and your hatch will open up without issues.
As for if it can... view full answer...
You are definitely on the right track to carrying 5 bikes on your 2017 Volkswagen Golf GTI. I recommend to use the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7309 which is a concealed 2" hitch for the Golf GTI. You can then use any 2" hitch compatible bike rack that you'd like but you will need to stay under 300 lbs which is factoring the weight of the rack itself and the bikes. I recommend to carry 3 bikes on the hitch and 2 bikes on the roof.
For the rack, I recommend the SportRack... view full answer...
I do have an option for you but I don't have any way for you to use your old Q-Towers on your new 2018 Volkswagen Golf GTI because the clips are just not available. The best option you have to reuse some of the components you have now is to purchase new clips part # Y06123 for the front and part # Y06125 for the rear, new feet part # Y28TR, and the adapter part # Y03536.
I am not sure what you are asking in regards to Thule but most of their accessories will work with the Yakima round... view full answer...
Absolutely!
I have attached the detailed written installation instructions for the Yakima JetStream Roof Rack system that is confirmed to fit your 2019 Honda Accord. This system consists of # Y00425 for the Black 50 Inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06123 for the Front Fit Kit, and # Y06159 for the Rear Fit Kit.
This system will use a clamp-style attachment to secure the feet to the roof of your Accord. I have attached an installation video for this system... view full answer...
I do have a roof rack fit for a 2015 Fiat 500 Abarth but it is not from Thule, rather Yakima. I did check with Thule but they do not list a fit for the Abarth. That said, I called Yakima and they said the Yakima JetStream Crossbar System part # Y00425, part # Y28TR, part # Y06110, and part # Y06123 will work. I have attached a photo below. view full answer...
The Yakima round bar roof rack system made of parts # Y00408, # Y28TR, # Y03536, # Y06123 and # Y06170 is a confirmed fit on your 2014 Nissan Sentra and its 165-lb weight rating makes it suitable for transporting two typical kayaks. I have linked an installation video to illustrate that process.
It is a good idea to check your Sentra owner's manual to make sure Nissan rates the roof with enough capacity for the actual weight of your two particular kayaks, plus the weight of the roof rack... view full answer...
For your 2017 Chevy Bolt you'll need to switch over to the Yakima roof rack system as Thule doesn't have a fit kit for your vehicle. I really like the Yakima JetStream crossbars since they have the aero-style design and a rubber strip in the top channel that you don't have to trim to install track-mount accessories. For your application you'll need the following parts:
50" JetStream Crossbars - # Y00425
BaseLine Towers - # Y28TR
BaseClips - # Y06123 and # Y06181
Lock Core Kit - # Y07204... view full answer...
The 2020 Toyota Prius and the Prius prime do indeed use the same roof type. The Rhino Rack # RR67TR that you mentioned is no longer available, but to answer your question, yes, it will fit the Prius Prime as well.
As far as available roof racks for the 2020 Prius Prime, I recommend the Yakima JetStream roof rack. The complete roof rack consists of the following parts:
Yakima JetStream Crossbars # Y00425
BaseLine Towers for Yakima Crossbars # Y28TR
BaseClip Fit Kit # Y06123
BaseClip... view full answer...
We have plenty of kits that will work great for your 2018 Chevrolet Malibu. I recommend the Yakima JetStream Crossbars # Y00426, BaseLine Towers # Y28TR, and BaseClip Fit Kit # Y06123. These components will make up your roof rack.
As far as a kayak rack to haul your kayaks, the etrailer J-Style Kayak Carrier # e98878 is a great option because it comes with straps to tie your kayaks to the carrier and bow/stern straps with anchors. You would need two kits, one for each kayak.
If you would... view full answer...
For your 2020 Chevy Bolt, the roof rack recommendation will depend on if you have flush mounted rails that run front to back or no rails (naked) roof.
If you have a naked roof, then I recommend the Yakima roof rack consisting of:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06123
BaseClip Fit Kit for Yakima BaseLine Roof Rack... view full answer...
For your 2019 Chevy Bolt EV that has a totally naked roof we have the Yakima JetStream roof rack part numbers # Y00425, # Y28TR, # Y06123, and # Y06181 as a confirmed fit. This is a very aerodynamic roof rack that is easy to install and very high quality. Due to the aero shape of the bars it gives you minimal wind noise as well as affects your fuel mileage less than other bar shapes. view full answer...
We do have all of the parts for a Yakima roof rack that fits a 2017 Toyota Yaris iA with a naked roof. It will consist of the following components:
- Yakima JetStream Crossbars # Y00425 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06123
- BaseClip Fit Kit # Y06159
- Same Key System Lock Cores (Optional) # Y07204
This will give your '17 Yaris iA a very quiet and strong rack so you can carry whatever gear you need. I've added links to instructions and video... view full answer...
The best option for a roof rack on the 2019 Toyota Prius is the Yakima JetStream Crossbars part # Y00425 with the fit kit part # Y06123, part # Y06169 and BaseLine Towers for Yakima Crossbars part # Y28TR. The BaseLine towers are the best option as far as fit goes on the Prius because you can adjust the pitch of the tower to get the roof rack level even on the curved roof of the Prius which is an issue that many Prius owner's have run into in the past. The Yakima bars are also aerodynamic... view full answer...
I really like the Kuat Grip Ski and Snowboard Carrier # GRR6B because it looks sleek and has a slide out feature that makes it easier to load your skis/boards. The Grip has a nice, low-profile build so it compliments your vehicle and there are angle adjustment bolts to make sure both parts of the carrier are level with each other so it's easy to install your skis/boards.
This installs on a roof rack so if you don't already have one on your 2019 Honda Accord I recommend going with the Yakima... view full answer...
I checked with Yakima to verify their crossbar spread dimension of their rack that consists of part numbers # Y00421, # Y28TR, # Y06123, and # Y06125 and it is 32 inches between the front and rear bar on center.
From the front windshield to the front crossbar it will measure 7 inches. You can use these dimensions to find out exactly where the roof rack will end up on your roof.
I attached a picture that I took from Yakima's site to verify this as well. view full answer...
I'll try to tackle these in the order you asked them:
1) No, the # RRRS605B will not mount where the plastic tab is and will instead mount 7-7/8" towards the front of the vehicle from the line where the front and rear door meet- the # RRRS605B will clamp into the door jams on your 2019 VW Golf 5dr
2) It's generally a no-go when it comes to opening your moon roof with a roof rack attached to your roof. Luckily this roof rack is fairly easy to install and remove so you'll likely want to... view full answer...
Hi Hamza,
Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components:
Yakima JetStream Crossbars # Y00425
BaseLine... view full answer...
To transport the 3 longboards on the roof of your 2018 Honda Civic I recommend going with the Yakima JetStream crossbars system but with longer bars to accommodate all of your boards. Since the max amount of boards you can stack on a carrier is 2 we have to make sure there is enough room to place the longboards side by side. For a roof rack use the following:
60" JetStream Crossbars # Y00426
BaseLine Towers - # Y28TR
Fit Kit - # Y06182
Fit Kit - # Y06183
Then for carriers I recommend... view full answer...
While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process.
This will require the tightening tool that was included with your BaseLine Towers, but if you do not have the tool you can use a long 4mm Hex Wrench.
First you are going to want to remove the end cap from the tower, if you have the Yakima SKS lock cores # Y07204 you will need to unlock the cores, or if you have... view full answer...
I do have an option for you but there would be no way to reuse the entire Yakima Q-Tower Roof Rack on your 2017 Honda Civic because Yakima does not make a set of Q-Clips for this vehicle. The Q-Clips are actually the main vehicle specific part needed when transferring a system. The Yakima Q-Tower Roof Rack has been discontinued which is why you can no longer obtain new Q-Clips or replacement parts such as the Q-Pads.
The good news is that you can still use your old Yakima Round Crossbars.... view full answer...
We do have a really nice selection of roof racks that will work great on your 2019 Honda Civic. I highly recommend the Yakima JetStream Roof Rack which consists of # Y00425 for the two 50 inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06182 for the Front Fit Kit, and # Y06183 for the Rear Fit Kit. This will provide you with an extremely aerodynamic roof rack with built-in windridges on the bars that help to control air flow and dramatically reduce wind noise and vibration.... view full answer...
I reached out to my contact at Yakima and there is not a Q Tower Fit for your 2016 Honda Civic 4 door. They were making the switch to their Baseline Towers at the time that vehicle was made, so that is what they fit to your vehicle.
However, they do have a fit that I recommend for your vehicle that will allow you to use your old round bar crossbars. You will want the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR with RoundBar adapter # Y03536. You can use the... view full answer...
For a 2024 Chevy Trailblazer with factory rails that run front to back you'll need the following components:
Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Aluminum - Black - Qty 2 # Y89UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06183
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06187
If you have a naked roof then you'll need the following components instead:
BaseLine Towers for Yakima Crossbars - Naked Roofs -... view full answer...
The Sportrack Skyline Cargo Box SR7095 that you referenced does require a roof rack with crossbars that run from one side of the roof to the other. There's no way to attach it to a roof without them. I am not sure where you would have read that we try to make it pretty clear on our cargo box descriptions that it requires crossbars.
If you have rails that run front to back on the roof of your vehicle you would need the roof rack that consists of part numbers # RRVA137B-2 and # RRSX100.
If... view full answer...
Yes, I would be happy to! To add a roof rack to your 2024 Chevrolet Trailblazer with no roof rails or mounting points you will need the following parts:
Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06183
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06187 view full answer...
To install a round bar Yakima roof rack on your 2018 Honda Civic SI Sedan requires the following components.
Round 48" CrossBars # Y00408
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit # Y06182
BaseClip Fit Kit # Y06183 view full answer...
I have a solution for you, however Yakima no longer produces parts for the Q-Tower system and they never came out with a Q-Clip for your vehicle so we'll need to get you a whole new rack.
Fortunately, since you already have round bars and racks, you don't need that much to start using your racks and round bar. The new kit for a 2017 Honda Civic SI is called BaseLine and consists of:
- BaseLine Towers, part # Y28TR
- RoundBar SL Adapters for BaseLine, part # Y03536
- BaseClip Fit Kit... view full answer...
The first thing to look at is the roof capacity of your vehicle. The combined weight of the rack, 2 kayak carriers, and a pair of 64 pound kayaks is a concern. I confirmed the roof capacity is 110 pounds on the 2018 Civic Sedan.
A better option and my recommendation is carrying your 2 kayaks on a Malone MicroSport Trailer designed for 2 Kayaks # MPG461G2. If you don't already have a tow package or hitch on your Civic, it requires a tow hitch like the Curt Trailer Hitch Receiver #... view full answer...
I have a solution for you, but unfortunately the Rola Sport Extended Series Roof Rack 59834 is not a fit for the 2012 Honda Pilot LX with a naked roof.
Instead, you'll want the Yakima Roof rack consisting of these parts: # Y01157, # Y28TR, # Y03541, # Y06183. This will provide a roof rack for your vehicle. This gives you a sleek look like the Rola Sport but also one that fits your vehicle and has a better design. view full answer...
The rails that run front -to-back on vehicle's like your 2023 Chevy Trailblazer LS would be an OEM part that you'd only be able to get from GM. Getting something like that installed aftermarket is typically a bit of a hassle or just unrealistically expensive. If you decide you'd rather go with a crossbar roof rack that's compatible with your naked roof then you'll need the following components:
Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421
BaseLine Towers for Yakima... view full answer...
Yes, the Malone SeaWing Kayak Carrier part # MPG113MD will work with the Yakima Series Roof Rack made of parts # Y00426, # Y28TR, and # Y06183 which is a fit for your 2011 Honda Pilot. This Yakima Roof Rack has standard size aero crossbars so the Malone SeaWing Kayak Carrier will work without any issue at all. This will be an excellent way to carry a kayak on your Honda Pilot. The carrier comes with tie-downs too so you will be ready to hit the water once you receive the above, nothing... view full answer...
To add a set of crossbars, that don't extend past the legs, to your 2024 Chevy Trailerblazer, I recommend the roof rack by Yakima which includes the following parts:
Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y89UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06183
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06187
This aero bar roof rack system has a 165 lbs capacity. I recommend adding... view full answer...
To add a roof rack to the naked roof of your 2024 Chevrolet Trailblazer, I recommend the roof rack by Yakima which includes the following parts:
Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06183
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06187
This aero bar roof rack system has a 165 lbs capacity. The crossbars do not extend past... view full answer...
The 54" Vortex Crossbars # RRVA137B-2 and SX Series Legs # RRSX100 from Rhino-Rack will fit great on your 2015 Honda Pilot as long as you have the raised rails.
If you don't have the raised rails then we need to look at a different brand of roof rack as Rhino-Rack doesn't have a fit for the naked roof version of your Pilot. For your application I recommend the Yakima JetStream system which is an improved version of the Vortex bars you were looking at. For a complete roof rack system you... view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
2/26/2025
Thanks, Eric! Glad the crossbars have been working well for you :)