See what our Experts say about this Yakima Roof Rack

• Can Thule WingBar Evo Crossbar Fit On Yakima SkyLine Towers
  The Replacement Adapter and Seat # 8880637 is designed for Yakima JetStream bars but we do have a review showing them being used with Thule WingBars so it does look like they will physically fit together. With that being said, I recommend sticking with Yakima products just because if you do happen to experience any faults with the system (which there shouldn't be any) it would be a lot easier to work with Yakima or Thule if you can show that you're using the product as intended and you...
  view full answer...
  
• What is Needed to Mount Yakima JetStream Crossbars to Raised Side Rails on 2024 Subaru Crosstrek
  Hey Malia, It's really simple, because all you need to attach the Yakima JetStream Crossbars # Y00428 to the raised side rails on your 2024 Subaru Crosstrek are the TimberLine towers, with the correct part number being the following: - TimberLine Towers for Yakima Crossbars # Y33TR
  view full answer...
• Can Yakima JetStream Crossbars Be Installed On a 2024 Hyundai Palisade With Flush Rails
  Hi Patrick, Yakima's JetStream crossbars can be installed on your 2024 Hyundai Palisade but you'll need the following components in order to do so: RidgeLine Towers for Yakima Crossbars - Qty 4 # Y00145 RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Towers # Y89FR Yakima recommends their 50" JetStream crossbars # Y00425 (black) & # Y00428 (silver) for your vehicle. Yakima's crossbars do have a mounting channel running the full length of the bar so you could go larger if you want,...
  view full answer...
• Recommended Roof Rack for a 2023 Chevy Bolt EUV w/ Side Rails
  Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach to your...
  view full answer...
  
• What Roof Rack and Cargo Box For My 2020 Jeep Grand Cherokee?
  For your 2020 Jeep Grand Cherokee with black/chrome flush factory rails, I recommend installing the reliable Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 # Y00428. In order to install these, you will also need Towers # Y53TR and Landing Pads # Y00244. The weight capacity is 165lbs, but you will want to verify that your vehicle roof can handle that much weight (owner's manual). As far as the cargo box, you will be able to accommodate the largest size we offer and still...
  view full answer...
  
• Yakima Roof Rack Fit For 2024 Subaru Outback Wilderness
  Sure can; I checked with Yakima and the correct parts for a Yakima roof rack on your 2024 Subaru Outback Wilderness are the following: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - TimberLine Towers for Yakima Crossbars # Y33TR I also recommend protecting your investment by adding locks to secure the rack; you can do this with the Yakima Same Key System (SKS) Lock Cores # Y07204.
  view full answer...
• Solution for Needing to Mount Thule ProRide XT Bike Rack on Yakima Corebars
  If the clamp brackets of the Thule Pro Ride XT part # TH598004 will not fit around your Core bars you'd have to replace them with Jetstream bars like the part # Y00425 for black or # Y00428 for silver. Thule does not offer any adapter solutions for this bike rack. Yes it is okay to lubricate the arm of the rack as well.
  view full answer...
• Is The Malone FoldAway Carrier Compatible With Subaru Outback Factory Crossbars
  From what I can find in the online owner's manual Subaru just doesn't want you exceeding 150lbs with the factory crossbars, which is same capacity for the Malone FoldAway-5 Kayak, Canoe, and SUP Roof Rack # MAL38FR that you were looking at. They aren't really descriptive with the shape or dimensions of the factory crossbars so you'll want to ensure that they fall within the requirements of the # MAL38FR, which I have pictured below. If your crossbars fall outside of these requirements...
  view full answer...
  
• Can a Roof Rack Be Installed on a 2024 Toyota Sienna?
  Yes, a roof rack can be installed a 2024 Toyota Sienna. The easiest way is if yours has the raised rails on the top of your roof. If your 2024 Sienna has raised roof rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs...
  view full answer...
• Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers?
  The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
  view full answer...
• Recommended Roof Rack and Locks for 2024 Toyota RAV4 Hybrid With Yakima ShowDown
  I'm glad you want to stick with Yakima since it is what I would have recommended regardless. For your 2024 RAV4 with flush rails I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00425 (black) OR # Y00428 (silver) -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR -Yakima Same Key System Lock Cores (QTY 6) # Y07206 for the rack and ShowDown OR # Y07204 for just the rack. The...
  view full answer...
• Does Yakima Roof Rack For 2013 Toyota Prius Require Professional Install
  I would tell them they could do it and not to bother with spending money to go to a mechanic or the dealer. Do you have a measuring tape of some sort? If so, that's it regarding the needed tools to install the Yakima rack on your 2013 Toyota Prius. So no tools are needed, it's light as a feather, and all you have to do is some measuring to get it installed. I am 1000% confident this is something you can do on on your own in about 30 minutes without any assistance. The correct fit for the...
  view full answer...
• Best Roof Rack For 2024 Subaru Impreza Hatchback
  The best roof rack for your 2024 Subaru Impreza hatchback with a naked roof is from Yakima due to how quiet it is as well as its durability. The roof rack that fits your Impreza is made up of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - Landing Pad 22 for Yakima Towers # Y00248 The JetStream bars are quiet because have what are called "WindRidges" on top that control the flow of the air both over...
  view full answer...
• How to Determine Correct Roof Rack For 2024 Kia Telluride
  I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
  view full answer...
  
• Roof Rack For 2024 Chevy Blazer EV With Flush-Mount Rails
  Hi Chris; we do in fact have a roof rack fit for your 2024 Chevy Blazer EV, so long as your Blazer has flush-mounted rails to attach the feet to. The rack is from Yakima, and I verified this fit directly with them for you. The parts that make up the rack for your Blazer are the following: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245 This is an exceptionally...
  view full answer...
• Recommended Roof Rack for a 2024 Cadillac XT4 w/ Flush Rails
  Congrats on the new vehicle! To add a Yakima roof rack to your 2024 Cadillac XT4 with flush rails you will need the following parts: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 item # Y00421 or item # Y00428 for silver crossbars SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 I recommend adding the Yakima Same Key System item # Y07204 to help prevent...
  view full answer...
• Best Roof Rack For 2025 Toyota Corolla Cross WIth Bare Roof
  The best roof rack for your 2024 Toyota Corolla Cross with a bare roof is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06153 - BaseClip Fit Kit # Y06154 I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the...
  view full answer...
• Will the Yakima SkyBox 21 Fit a 2014 Subaru Outback Wagon
  Yes, the Yakima SkyBox 21 Rooftop Cargo Box # Y07337 will fit your Outback as long as you have round, square, aero, elliptical, or factory crossbars. If you don't have any bars, you'd just need to add a set like the Yakima JetStream Crossbars # Y00428 with the TimberLine Towers for Yakima Crossbars # Y33TR and you'd be good to go.
  view full answer...
• Roof Rack For 2023 Cadillac XT4
  By cross rails I believe you are referring to a roof rack, and we do have a fit for a roof rack on your 2023 Cadillac XT4, from Yakima. The rack consists of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 # Y00245 This rack will not only fit your '23 XT4, it will provide it with a quietest, durable, easy-to-use roof rack that also looks great. The rack is quiet because it has "WindRidges"...
  view full answer...
• Recommended Roof Rack for a 2024 Mazda CX-50 w/ Flush Rails
  To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Can I Put 70" Yakima JetStream Bars On A 2024 Kia Niro PHEV
  You absolutely can put your Yakima JetsStream bars on your 2024 Kia Niro PHEV with factory flush rails. To do so you will need the following parts: SightLine Towers for Yakima Crossbars # Y64AR SightClip Fit Kit for Yakima SightLin3 Towers # Y27AR Since the mounting channel on the Yakima crossbar runs the full length of the bar, you can mount virtually any size crossbar on your roof. That said, we recommend a 50" bar # Y00428 for the Kia Niro. So while your 70" bars will still fit, there...
  view full answer...
• Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDX
  Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
  view full answer...
• Height of Yakima & Thule Roof Racks on 2022 Jeep Grand Cherokee 4xe
  The Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 5 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack: Thule - Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE - (Optional): Thule One-Key System Lock Cylinders # TH450400 Yakima - Yakima JetStream Crossbars - Silver...
  view full answer...
• Availability Of Thule Fit Kit 183160 For A 2019 Mazda CX-5
  I do have a potential solution for you, but we do not carry the Thule 183160 fit kit, nor do we have an alternative. Unfortunately we do not offer any Thule roof racks for the factory flush rails on your 2019 Mazda CX-5 with factory rails. We do carry other roof racks you can put on your 2019 Mazda CX-5 with factory flush rails. If you are in need I recommend the Yakima Jetstream bar setup. This will be very similar to the Thule Wingbars. The full roof rack consists of the following parts; Crossbars...
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Can Yakima Tracks Be Installed On The Roof Of A Toyota Tacoma?
  Hi Sofia! Yakima Tracks for Roof Racks can definitely be installed on the roof of your Tacoma. Well, as long as you have over 54" of roof to work with, so I do recommend measuring your roof to make sure you have enough room. The Yakima 54" Tracks for Roof Racks # Y26RR is intended for fiberglass though, so you would also need to grab the PlusNut Hardware Kit for Yakima Roof Rack Tracks - 42" or 54" # Y8880039 for it to be mounted (this creates a better seal on metal surfaces). The Yakima...
  view full answer...
• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• What is the Best Roof Rack Option for a 2002 Mercury Grand Marquis?
  Yes, the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black # 298-SX6000B is the best option (and currently, the only option) for you. The Monkey Bars has one of the easiest installations of any roof racks we carry. In addition, the Monkey Bars have a total weight capacity of 150 pounds to give you plenty of capacity to transport cargo and accessories on your 2002 Mercury Grand Marquis. To carry your accessories, you might not be able to transport your kayaks, bikes,...
  view full answer...
• How to Add Roof Rack to 2007 Saturn VUE Without Raised Rails
  Hi Stephen; there are no specific kits that will allow you to install tracks and crossbars on your 2007 Saturn VUE. However, that does not mean it can't be done. What you can do is use rails like the Yakima 42" Tracks for Roof Racks # Y01126 which will require drilling. Make sure to measure your roof to ensure you have enough space for the tracks. With the tracks installed you can add crossbars using the SkyLine Towers # Y53TR and Landing Pad 1 # Y00221. Based on the racks designed to...
  view full answer...
• Parts Needed to Use Yakima SkyLine Tower Setup from ARE Truck Camper on 1998 Jeep Wrangler
  To use your Yakima SkyLine setup on your 1998 Jeep Wrangler you just need the 42" Tracks # Y01126 and 2 sets of the Landing Pad 1 # Y00221. This will then allow you to easily transfer the SkyLine Towers # Y53TR and whatever crossbars you are currently using, like the 50" JetStream # Y00425. Just be sure that the crossbars from your ARE camper shell don't stick out further than the side mirrors on your Jeep. I have attached installation instructions for you to check out.
  view full answer...
• Looking For Roof Rack System For High Roof Camper Shell
  Hello Bryant, thanks for reaching out. We do offer a roof rack system that will work for your high roof shell. It will involve mounting a pair of tracks on the roof, then the roof rack towers install onto the tracks. Here is what I recommend: - Yakima 42" Tracks for Roof Racks # Y01126 - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Yakima JetStream...
  view full answer...
• Roof Rack for 2022 Ford F-250 Crew Cab
  Hi Devin; I'm not aware of one that attaches to the fixed points on your roof but we do have roof racks you can add to your 2022 F-250 without drilling. All of the roof racks are going to clamp on using the door jambs which also means the rack is easy to install and take off. Sticking with Yakima, you can use the Yakima BaseLine Roof Rack for Naked Roofs # Y76KB. This comes with their extremely quiet JetStream crossbars along with the feet and fit kit required for installation.
  view full answer...
• Is The Rhino-Rack Roof Rack For Yakima Tracks Compatible With Yakima HD Tracks
  Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components: Landing Pad 26 # Y75ZR (x2) SkyLine...
  view full answer...
• Ladder Rack for a Leer Camper Shell on a 2007 Toyota Tundra
  We do have a camper shell ladder rack you can use with your Leer camper shell on your 2007 Toyota Tundra. take a look at the Thule TracRac CapRac # TH29200XT. This rack includes everything so it is ready to install. The load stops are also included. The bars are 65 inches long and the capacity is limited to the capacity of your Leer camper shell. If you would rather have a rack that is adjustable front to back then you can use Rhino-Rack roof rack # Y01-120-NTB with 54 inch long bars but...
  view full answer...
  
• What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
  If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. For the tracks themselves, they come in 3 different sizes: - Yakima 42" Tracks for Roof Racks # Y01126 - Yakima 54" Tracks for Roof Racks # Y26RR - Yakima 60" Tracks for Roof Racks # Y01135 Since most truck...
  view full answer...
• Can the Yakima Tracks for Roof Racks Be Trimmed
  I can't see why you wouldn't be able to cut the Yakima 54" Tracks for Roof Racks # Y26RR if need be. As long as you're able to cut it cleanly to where the end cap would fit back in place as it was before, you'll be good to go. We also have shorter tracks, # Y01126, which are 42" long which might be better suited for you.
  view full answer...
• Will Thule UpRide Bike Rack Fit T-Slot of Rhino-Rack Vortex Crossbars for Track Mount System
  Yes, the Thule UpRide # TH599000 will fit the T-Slot channels of the Rhino-Rack Vortex crossbars. The Rhino-Rack tracks don't have extra end caps available but I do have another solution for you. I confirmed this with my contact at Rhino-Rack. The Yakima tracks, similar to the Rhino-Rack tracks, do have replacement end caps that will allow you to easily do what you are wanting to do. The Yakima tracks come in 3 different lengths; 42" # Y01126, 54" # Y01127, and 60" # Y01135. You will just...
  view full answer...
  
• Replacement Hardware for Yakima 60" Roof Rack Tracks
  The Replacement PlusNut Hardware for Yakima Roof Rack Tracks # Y8810102 works only to replace the original PlusNut and washer on Yakima 42" # Y01126 or 54" # Y01127. For the complete hardware kit see Replacement PlusNut Hardware Kit # Y8880039. For your Yakima 60" Roof Rack Tracks # Y01135 you need replacement kit # Y8810155 since we don't sell individual parts for this kit separately. This kit includes 12 capnuts, 12 bolts, 9 black nylon washers and 13 white nylon washers.
  view full answer...
• Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass Roof
  The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks # Y01126 or the Yakima 54" Tracks for Roof Racks # Y01127 both these tracks include the PlusNut hardware. Since you have a fiberglass roof you will also need to get the Replacement Capnuts, Washers and Bolts # Y8810155 which is needed when installing on a fiberglass roof. To have a complete roof rack you would also need to pick up the Landing...
  view full answer...
• What are the Replacement PlusNuts for the Yakima Roof Rack Tracks Made From
  The Yakima PlusNuts replacement part # Y8880039 is the optional hardware kit for Yakima roof rack tracks # Y01126 (42 inch) and # Y01127(54 inch) and are made out of steel. The roof-rack tracks are an anodized aluminum so you wouldn't have any issues using other types of metals.
  view full answer...
• Can Yakima Tracks Work on Truck Cap and Roof
  You can add the Yakima Tracks for Roof Racks, which come in 60" # Y01135, 54" # Y01127 or 42" # Y01126 to your 2015 Ford F-150 although I could not tell from the photo if there was a space between the truck cap and the roof of your truck. If there is a space between them you wouldn't want to install just the two tracks per side as that wouldn't be fully secure. As for the rivets showing, they won't specifically, but the CapNuts in the hardware would show because you need to drill through...
  view full answer...
  
• Can Yakima Tracks for Roof Racks be Slightly Bent During Install on Tear Camper
  I reached out to Yakima in regards to bending the Yakima 42" Tracks for Roof Racks # Y01126 and they told me that yes it is okay to bend the tracks during the installation. For the rest of the installation you can use a quantity of two of the Landing Pad 1 # Y00221, along with four of the Yakima Control Tower # Y8890027 and round bars like the 58 inch # Y00409, 66 inch # Y00410, or 78 inch # Y00411, depending on the size of your camper's roof.
  view full answer...
• Which Yakima Roof Rack System For 2021 Toyota Tacoma and Shell
  To mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers # Y28TR, Round 48" Crossbar # Y8810021, Round Bar Adapter # Y03536, and Base Clip Fit Kit # Y06128 if you are mounting the crossbar on the rear of the vehicle, or Base Clip Fit Kit # Y06145 if you are mounting the crossbar on the front of the vehicle. For your shell you can use your existing Yakima Round Crossbars or Round 48" CrossBars for Yakima Roof Rack System # Y00408. In addition you will...
  view full answer...
• Do Yakima Tracks Need Yakima Feet & Crossbars
  Yes, you will need to stick with Yakima when installing the Yakima 42" Tracks for Roof Racks # Y01126. You will also need the TrackTowers for Yakima Crossbars and Platforms # Y52AV.
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Roof Rack For A 2023 Toyota 4Runner And A Yakima SkyBox
  We can definitely help set you up with a Yakima SkyBox NX 16 # Y95AV for the top of your 2023 Toyota 4Runner with the factory raised rails. All you will need to do is install a roof rack with crossbars. Since you are doing a Yakima brand roof box, it is best to go with a Yakima brand roof rack as well, since everything will be directly compatible. The Yakima JetStream crossbars will be a great fit for your vehicle. The complete roof rack consists of the following parts: Yakima JetStream...
  view full answer...
• Can I Put A 60" Long Crossbar On A 2022 Subaru Outback
  Hello Joe, thanks for reaching out. Yes, it is possible to put a 60" (or longer) crossbar on your 2022 Subaru Outback. I will need to verify a bit more vehicle information before I can recommend the correct parts. Does your outback happen to be the Wilderness edition? Let me know. Also please verify that your Outback has the factory installed raised rails running from front to back. Let me know and I will be able to narrow down the right roof rack. For example, if you do have the Wilderness...
  view full answer...
• Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
  Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Roof Rack and Rear Loading Kayak Carrier Recommendation for a 2021 Honda CR-V
  For your application I recommend going with a Yakima setup, both for the roof rack and for the kayak carrier. To install a Yakima roof rack on your 2021 Honda CR-V you need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) The Rhino-Rack Nautic 581 Rear Loading Kayak Carrier # RR581 will fit the channels of the Yakima system just fine and it's a good rear-loading kayak carrier, I just really like...
  view full answer...
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Best Roof Rack for 2020 Kia Soul with Fixed Mounting Points
  The best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
  view full answer...
• Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
  You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
  First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Recommended Roof Rack Replacement System for a 2014 Toyota FJ Cruiser
  It looks like the picture came through, Jessica. From what I can see, it looks like the issue is with the OEM rails, which we aren't going to be able to fix. No matter which set of crossbars you choose, you're still going to have a pretty tall setup because the OEM rails are pretty tall. What you could do, is use a track system # RTC16 which would require you to remove your OEM bars. From here you'd need to add the landing pad # Y00221, towers # Y53TR, and bars # Y00425. This would...
  view full answer...
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
  For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
  view full answer...
• Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
  I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
  view full answer...
• Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
  Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
  view full answer...
• Recommended Roof Rack System for A.R.E. Camper Shell with Tracks
  The items mentioned in your question are exactly what you need to install a roof rack system to the A.R.E. Camper Shell on your Ford F-150. Just to confirm, you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper...
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
  Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Crossbars That Will Fit Both A 2023 Chevy Tahoe And An ARE Camper Shell
  Hello Dusty, thanks for reaching out. I do have a solution for you, but Rhino Rack currently does not offer a roof rack fit for a 2023 Chevy Tahoe. Yakima, on the other hand, does offer a fit for both your Tahoe and your ARE camper shell. You can use their 60" JetStream Aero Bars for both. Here is what you will need for your Tahoe: - Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2 # Y89KB Then here is what you will need for the ARE shell: -...
  view full answer...
• Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
  You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
  First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Recommended Roof Rack Replacement System for a 2014 Toyota FJ Cruiser
  It looks like the picture came through, Jessica. From what I can see, it looks like the issue is with the OEM rails, which we aren't going to be able to fix. No matter which set of crossbars you choose, you're still going to have a pretty tall setup because the OEM rails are pretty tall. What you could do, is use a track system # RTC16 which would require you to remove your OEM bars. From here you'd need to add the landing pad # Y00221, towers # Y53TR, and bars # Y00425. This would...
  view full answer...
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
  For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
  view full answer...
• Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
  I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
  view full answer...
• Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
  Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
  view full answer...
• Recommended Roof Rack System for A.R.E. Camper Shell with Tracks
  The items mentioned in your question are exactly what you need to install a roof rack system to the A.R.E. Camper Shell on your Ford F-150. Just to confirm, you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper...
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
  Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Crossbars That Will Fit Both A 2023 Chevy Tahoe And An ARE Camper Shell
  Hello Dusty, thanks for reaching out. I do have a solution for you, but Rhino Rack currently does not offer a roof rack fit for a 2023 Chevy Tahoe. Yakima, on the other hand, does offer a fit for both your Tahoe and your ARE camper shell. You can use their 60" JetStream Aero Bars for both. Here is what you will need for your Tahoe: - Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2 # Y89KB Then here is what you will need for the ARE shell: -...
  view full answer...

Do you have a question about this Roof Rack?