bing tracking image
  1. Trailer Suspension Parts
  2. Lippert
  3. Leaf Spring Enhancement System
  4. Boat Trailer
  5. Camper
  6. Car Hauler
  7. Snowmobile Trailer
  8. Utility Trailer
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
Lippert

Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle

Part Number: LC281255
In Stock
$184.61
Retail:$264.11
You Save: $79.50
Trailer Suspension Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Instantly improve your ride with this suspension upgrade kit. Heavy-duty shocks help to manage axle spring movement and provide a smoother, more comfortable ride. Hardware included for easy, bolt-on installation. Fits 2-3/8" axles. Great Prices for the best trailer suspension parts from Lippert. Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle part number LC281255 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (25)
  • Q & A (0)
  • Videos (1)
  • Photos

Lippert Trailer Suspension Parts - LC281255

  • Leaf Spring Enhancement System
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Round Axle - 2-3/8 Inch
  • Single Axle
  • Lippert
  • Shocks

Instantly improve your ride with this suspension upgrade kit. Heavy-duty shocks help to manage axle spring movement and provide a smoother, more comfortable ride. Hardware included for easy, bolt-on installation. Fits 2-3/8" axles.


Features:

  • Heavy-duty gas shocks absorb road shock and vibration to provide a more comfortable towing experience
  • Easy, bolt-on installation
    • Included tie plates and U-bolts replace your existing hardware
    • Upper brackets mount on trailer frame with included self-tapping screws
    • Shocks attach to tie plates and to upper brackets to help dampen movement of axle
  • Enamel finish resists corrosion


Specs:

  • Application: leaf spring suspension systems with 3,500-lb (2-3/8") overslung axles
    • Minimum clearance between inside of tire and the I-beam flange is 4"
  • Shock length:
    • Extended: 13-1/2"
    • Compressed: 8-5/8"
  • 90-Day warranty


281255 Lippert Components Bolt-On Shock Mount Kit with Heavy Duty Gas Shocks - Fits 2-3/8" Axle Tube





Video of Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Lippert Trailer Leaf Spring Suspension - Bolt-On Shock Mount Kit - LC281255

Hello everybody, this is Jeff at etrailer.com. Today, I'm gonna take a look at the Lippert Bolt-On Shock kit with the heavy duty gas shocks for thirty-five hundred pound axles. Now this will instantly improve your ride with the suspension upgrade kit. It uses these heavy duty gas shocks to absorb any road shock and vibration and provide a more comfortable towing experience. Does include all the pieces here laid out on the table. Has the two upper mounting brackets, the two lower mounting tie plates, the four U-bolts with the installation hardware, the two gas shocks with the mounting hardware for the shocks.

Now this is a very easy bolt-on installation. These included tie plates and U-bolts will replace your existing hardware. The upper brackets right here is what will mount on your trailer frame with the included self-tapping screws and the shocks will attach to the tie plates on the bottom and to the upper brackets to help dampen movement of your axle. They do have a nice enamel finish to resist corrosion. A few specs on this, the application.

This is for a leaf spring suspension system on a two-and-three eighths-inch diameter, thirty-five hundred pound overslung axle. Now the minimum clearance between the inside of the tire and the I-beam flange is four inches. The shock length when it's fully extended is 13-and-a-half inches and when it's fully compressed is eight-and-five eighths inches. But that should do it for the review on this Lippert Bolt-on Shock kit with the heavy duty gas shocks for a thirty-five hundred pound axle..

Customer Satisfaction Score:


Customer Reviews

Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle - LC281255

Average Customer Rating:  3.9 out of 5 stars   (25 Customer Reviews)

Instantly improve your ride with this suspension upgrade kit. Heavy-duty shocks help to manage axle spring movement and provide a smoother, more comfortable ride. Hardware included for easy, bolt-on installation. Fits 2-3/8" axles.

by:

The second bottom plate isn't correct. The u bolt don't fit the plate. I need a replacement part. The u bolts need to be longer also. I received this item over a week ago and was able to work on this Saturday and when unboxing the items, I noticed the difference is size of bottom shock plate bolt pattern was wrong. Please send me the correct item and I'll send this defective item back.
Thank you



by:

Not a trailer, but...
We needed a set
of shocks for a three-wheeled motorcycle truck conversion for our resort/farm in upper Thailand. I had to pack it in my luggage for the trip over. The vehicle came with no shocks on the back axle and the ride was really bad. This kit, with a bit of modification, really did the job and the ride is now significantly better in terms of smoothness and handling. Shocks were a bit long, but it worked out OK.



by: 03/22/2024

My small dumping trailer was bouncing and swaying all over the place. After installing this shock kit, it follows along like a dream. A more than worthwhile investment. Easy to install, great customer service. Thanks!!!



by:

I ordered two shock kits for a 3500 axle. One kit was complete with the right parts, the other kit had the rite parts except for the plates that go under the springs, the ones in this kit were for a larger axle kit. If I can't have those plates sent I will return the whole kit. I only need the plates that go under the springs. It would be nice to have instructions of some sort with the size of drill bit for the self threaded bolts. I think this kits are made very cheap with no respect for those installing their kits. I will not reccomend them to anyone

Etrailer Expert

Brooke M.

7/27/2023

Thank you for reaching out and letting us know about the missing pieces. I see our customer service team has gotten those parts in the mail and shipped!



by:

Ordered this kit and received it in a couple of days. Install was straight forward. First side took about 3 hours due to time spent measuring and laying it out to make sure the shock wouldn't over compress or extend. Second side took about an hour. The U bolts in the photos are not the ones supplied in the kit. These were installed prior with the lowering block. U bolts in the kit are standard length.



by:

Very good product so far. Have had them on for nearly a year, maybe 2000 miles on them. We do have an anti sway bar on our 180bh sportsman classic but no distribution hitch. I chose to put bags under our 1500 EcoDiesel. So the sway is controlled by the anti sway bar but we still have a considerable amount of what I call role in the camper. Top to bottom the camper would lean side to side with our Texas panhandle winds. So these shocks have nearly eliminated the role. I did have to weld the brackets on the frame rather drilling and bolting. Not sure if the universal kit isn’t universal or due to the fact I did and axle flip on our camper caused this issue. Either way very glad I got them, doing what they are supposed to do. Thanks e trailer.

Cary

5/24/2020

Doing good still, pulled camper from Amarillo Texas thru Louisiana, Mississippi, Alabama on our way to Disney world, then back they Alabama, Tennessee, and Arkansas for vacation last year. We put about 4000 miles on the camper and shocks still doing what they are supposed to do, controlling the role.



by:

Mediocre hardware, okay shocks, upper shock brackets are worthless.

I installed this kit on a single axle, spring under suspension, travel trailer. Ubolts were barely long enough and once torqued, there is only a couple threads showing outside the nuts.

The upper brackets are designed to be used on a box or c-channel frame. Since my trailer has an i-bean frame I had to have custom upper brackets fabricated. Even if the brackets included would have worked they would have required some work as they had welding splatter all over them and the welds didn't look too be the highest quality.



by:


Product:
First up - "Made in China"
- just need to expect that kind of production. HOWEVER, the welds on the product looked very good-good penetration, etc. Heavy gauge steel, like you'd want; very good. U-bolts and hardware look appropriate for the task; cadmium coated and fine thread for good torque.

Brackets are not finished to a high aesthetic level (paint doesn't fully cover, welding splatter painted over, etc.), but hey, it's UNDER the trailer. Some Rustoleum takes care of the paint... Shocks look and feel "ehh" - serviceable. We'll see how it works. Fully anticipate replacing them with higher-end shocks some time down the road at a later date. No instructions in box; lots of instructions on the inter-web. That's the "made in China" part... But, the good side of that is, a lot of stuff for not much money to solve a specific problem out of the box, which SHOULD be fairly simple. I will likely weld the top plate in place instead of using the included, self tapping, plated screws (they look adequate as well, but I like welding and it doesn't loosen-ever).

This is going on a 5 x 10 utility trailer with some air bags as an "upgrade" to carry lighter, fragile loads when I want to.
Will update when I finish installation.

Retailer:
etrailer shipped on-time, good frequent communication, best price; what more do you want? Do business with them again? Absolutely.



by:

Have a 2016 Jayco Whitehawk Travel trailer. Because of our wonderful roads in Pa., chucking was a big problem with this unit. Has Lippert Wide Stance axels and the shock kit is the only thing available at this time to tame this bucking bronco. I installed them in driveway, 1 set on each axel. Checked the angle of the shocks and they are placed at a 39 degree angle because of the wide stance axels (max angle on shock is 45 degrees). Went on a 150 mile trip and what a difference. It is pleasurable to pull this RV now even when hitting these dips in road at 70MPH. I am pleased dealing with etrailer. Have purchased several items from them and have had wonderful service from them. Keep-up the good work guys and thanks for being a reputable Co. to deal with. Sam



by:

I am only posting this because you asked. I consider this a loss and just move on. My shocks blew out on the railroad tracks in Dodge City Kansas 1000 miles from home. I was on a trip to the west coast from TN. After I had returned home the warranty was over. I bought better shocks. The mount kit was ok, so far. My new shocks cost $83 delivered.



by:

Installed the shock kit at pulled the trailer across Texas, Oklahoma, Kansas, Nebraska, and South Dakota to through the Bad Lands all using back roads to see the country. The trailer followed smoothly and kept things inside in place. A great install to really improve the pull and control on back rough roads.



by:

Product arrived on time, with free shipping as compared to other vendors who charge more than $100 for shipping. Had to modify/ cut one edge of the upper shock mount to fit my Lippert frame (2018 Grand Design Imagine 2800bh). Straighforward installation, only issue is the kit comes with 8 self- tapping bolts ( need 5 bolts per upper mount). Definitely will order from Etrailer again.



by:

doesnt fit on the frame of my trailer as it is an I beam frame , now i have to get a shop to weld the top shock mounts to the frame , cost more for the welding than i paid for the shocks



by:

Shocks made a huge difference in the bounce while towing the trailer. Very worthwhile purchase and installation. I printed the installation instructions from your web site because the instructions included were worthless.



by:

the four shocks added great stability to my trailer. They help eliminate sway and trailer hopping not to mention shaking the stuffing out of the trailer.



by:

Shocks work great, travel trailer tows much smoother (sent picture after installation)



by:



by:

What a difference the trainer road so smoothly it was like it wasn't back there. Shocks and the kit that came with it are phenomenal. It handly much better.



by:

The product specs. listed on your web site were lacking exact enginering specs. According to the product delivered.
The fact that your product delivered is workable, does not excuse the fact that the web site description was vague at best.
Need extra steel to make your product work, was at the steel store this morning and could have purchased what was needed then.
Now need to make another 100 mile round trip to make the job good.



by:

Pleased with my purchase, installation was smooth - thanks!



by:

All items received as ordered. Have not installed yet.



by:

Excellent product w/outstanding price p oint!



by:



by:



by:


25
25

See what our Experts say about this Lippert Trailer Suspension Parts

  • Replacement Equalizer, Shackles and Shock Kit For a 2022 Nash 23D Travel Trailer
    The Triangular Equalizer # TREQ310 is a replacement for the Dexter 13-10 on your 2022 Nash 23D travel trailer. You should consider upgrading to the MORryde ALLTREK 4000 Shock Absorbing Equalizers # MR89DR. These will pair with either the 2-1/4" # MR46ZR or 3-1/8" # MR76ZR shackle kits depending on the length from center hole to center hole on your shackle links. While we do not carry the same KYB shocks installed by Nash we do have the Lippert Bolt-On Shock Kits. These are available for...
    view full answer...
  • Recommended Over-Under Conversion and Shock Kit for 2018 Jayco Jay Feather Travel Trailer
    In order to flip the axle on your 2018 Jayco Jay Feather Travel Trailer you will need an over-under conversion kit. In order to choose the right kit you will need to know the diameter of your axle. You need the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 if you have a 2-3/8" axle and the # K71-385-00 if you have a 3" axle. The Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281281 will do a great job absorbing road shock and vibration on the dirt roads you're...
    view full answer...
  • Lift Kit For 2016 Coachmen Viking 17BH Travel Trailer & How to Determine Larger Wheel
    You are better off with what is called an over/under kit, the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00. The # K71-384-00 lifts your trailer approximately the same amount as your axle's diameter plus the height of the leaf spring pack, so you'll have more room. Then, you can go to a larger tire and wheel, the Karrier ST205/75R14 Radial Trailer Tire with 14" White Wheel # AM32153. You'll have the needed height if you go with the over/under kit and this tire and wheel,...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Heavier Duty Leaf Springs For 25 Trailer With Tandem 3500lb Axles
    We have exactly what you are looking for. Since your leaf springs are right around 25-1/4" long with no weight on the axle I recommend the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles # e57SR which will give you the extra support you are looking and will bolt right up to your trailer. For replacement U bolts you will need four of the # CE23002, and for new hardware for mounting the springs to the hangers we have the # 166081 which is a standard bolt and nut, or the # 126B2 which...
    view full answer...
  • How to Add Lippert Shocks to 2020 Gulf Stream 199DD With Underslung Axle
    The Lippert Shock Kit # LC281255 is the only option for shocks on a single axle trailer but it is still possible to install these on your 2020 Gulf Stream 199DD. You can use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 to flip your axle so it is in the overslung configuration. This will also raise your trailer by the diameter of your axle plus the height of the leaf spring stack so you would also gain additional clearance. If you would rather not raise the trailer,...
    view full answer...
  • Cushioned Equalizer Compatibility with Tandem 3,000 lb Axles
    The Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs # K71-653-00 will most likely fit your assembly but may not offer as much cushion as desired for your small axles. You may instead want to consider the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 3K to 6K # LC279687 or the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers # K71-652-00. These systems do have equalizers that adjust from 5-1/4 inches to...
    view full answer...
    Image 1 for
  • Replacement Shocks For a 2008 Forest River Rockwood 232XR Pop Up Toy Hauler
    First you are going to want to try and determine which shocks you currently have. The Standard Shock # LC283271 is 7-1/2" compressed and 12" extended while the Heavy Duty Shock # LC283280 is 8-5/8" compressed and 13-1/2" extended. If neither of these match the dimensions of your shocks you can try and contact Forest River to see if they can tell you what they used on your 2008 Rockwood 232XR or I would go with the Heavy Duty Kit # LC281255 since it sees a lot of unpaved driving.
    view full answer...
  • Are Lippert Center Point and Roadmaster Comfort Ride Shocks Compatible
    It is possible that the Lippert Components Center Point # LC1565391 can work together with the Roadmaster Comfort Ride Shock Absorbers # RM-2460, though they have never been tested together. An educated guess is that it would be problematic because the shock absorbers attach to the frame of the trailer near the equalizer, and the Center Point's brackets and cushioned equalizer will be too large, and extend out to the point they interfere with the shock absorbers. What you can use instead...
    view full answer...
  • Replacement Upper Mounting Brackets For Lippert Bolt-On Shock Kits
    You will need the Replacement Shock Upper Mounting Bracket # LC29ED for 3" Lippert Gas Shock Kit # LC281281. The 3" upper mounts stick out further than the Mount # LC22FR for the 2-3/8" Kit # LC281255.
    view full answer...
  • Installing Lippert Components Bolt-On Trailer Gas Shock Kit
    The Lippert Components Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle # LC281255 are installed with the bottom of the shock in front of the rear axle and the top of the shock behind the rear axle. If you want to add shocks to the front axle as well, it will be the reverse so the bottom of the shock will be behind the front axle with the top of the shock pointed toward the front of the trailer. It is noted in the included instructions that shocks are to be installed...
    view full answer...
    Image 1 for
  • Can the Curt Rebellion XD Shock Absorbing Ball Mount Be Used With a Weight Distribution System
    That's a good idea but sadly I don't think Curt nor Equal-i-zer would permit using the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount part # C45949-2516 with an Equal-i-zer Weight Distribution System like part # EQ37100ET. That said, if you are looking to soften the ride I would first try to release some tension from the spring bars but if this then causes you to sag too badly you could look into installing shocks on the trailer, the Lippert Components Bolt-On Shock Kit part #...
    view full answer...
  • Shock Kit for Trailer with 2-3/8 inch Diameter Axle that is Overslung
    The Lippert shock kit part # LC281255 is designed to fit 3,500 lb trailer axles that are 2-3/8 inch in diameter and are overslung like it sounds like you have so this will fit and work great. Since you will be off-roading this will do a great job smoothing out the ride quality of the trailer as you are in rougher terrain.
    view full answer...
  • Recommended Suspension Upgrade for a 2014 KZ 235RK Sportsman Fifth Wheel Trailer
    I have a solution for you but it's not the Lippert Center Point Air-Ride Suspension # LC1565391, you were looking at. This suspension will still increase the height on your trailer by 2 inches because of the way the unit mounts. I have linked a picture from the instructions to show you this. I would instead recommend the Lippert Bolt-On Shock Kit # LC281281 for 3 inch axle tubes, or if you happen to have the 2-3/8 inch axle tube you will need # LC281255. These will simply bolt on to...
    view full answer...
    Image 1 for
  • Which Direction Should Shocks of Lippert Shock Kit Point on Tandem Axle Trailer
    The installation process of the Lippert Components Bolt-On Shock Kit part # LC281255 will be the same for a single axle trailer and a tandem/triple axle trailer, just repeated. When installing the shocks, you want to point them away from the shackle straps. So they will angle opposite each other on a tandem axle trailer. I have attached a photo of this for you as well.
    view full answer...
    Image 1 for Image 2 for
  • Suspension Enhancement Options for 2021 Salem FSX 178BHSKX With Single Underslung Axle
    According to SumoSprings, 6" is the minimum for the # TSS-106-40. I asked them about this and they said you cannot use these if the space is under 6" so unfortunately they won't work for you. Doing so will overload the springs which can cause damage to the trailer and make the ride bouncy instead of smooth. With that amount of space and the single axle you're pretty limited on options for suspension enhancement. If you really want to use the SumoSprings you could cut off your existing...
    view full answer...
    Image 1 for
  • Recommended 2014 Arctic Fox Travel Trailer Leaf Springs and Shocks
    From the measurements you provided, the 6-Leaf Double-Eye Spring # e27SR will be the closest in length we have available. That being said, your current springs do look a bit flattened out, so it will be a good idea to replace all 4 of them with something that has a little more capacity. The 6-Leaf Double-Eye Spring # SP-222275 will be a little shorter at 24 7/8 inches, but will have a higher capacity of 2,650 pounds per spring. The # e27SR is rated to 2,250 pounds per spring and may be...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Can the Lippert Trailer Shock Kit be Used with the Dexter Over-Under Conversion Kit?
    The Lippert Components Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle # LC281255 is compatible with the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00. This over-under kit If you have 3 inch axles ( lbs) then you will use # K71-385-00 and # LC281281. The over-under kit will give you the spring seat locations needed but will give you parts that the Lippert shock kit will duplicate. If you want to weld on spring seats, you can use # TRSS300 or # TRSS238...
    view full answer...
    Image 1 for
  • Is it Worth it To Upgrade from Dexter EZ Flex Equalizer to Road Armor Cushioned Equalizers
    Let's start with the most important question you asked first...is it worth it to upgrade from the EZ Flex equalizers to the Road Armor. Honestly it's not going to give you a noticeable improvement so it would basically just be a waste of your time and money. BUT I do have a different solution that will get you what you are looking for. What I would recommend is a shock kit like the Lippert kit part # LC281255. This will make a huge improvement in ride quality and won't affect ground clearance...
    view full answer...
  • Replacement Suspension Components for Keystone Bullet Premier with Dexter 13-148 Equalizer
    To change your equalizers on your 2013 Keystone Bullet Premier we don't have the exact equalizer you are seeking. Your premier I believe has the 42 inch on center axles which is a wider stance than standard, so changing other components like leaf springs and shackle straps will be required if changing your equalizer. I'm happy to assist with getting you a system that will work for you, but I will need to know your hanger measurements from center of hole to center of hole, the eye to eye...
    view full answer...
    Image 1 for
  • Recommended Trailer Suspension Options for 5th Wheel Trailers
    The shock mounts for trailer suspension are not available as replacement or independent parts. You would need to purchase kit # LC281255 or # LC281281. Another option that bolts to the frame of a 5th wheel are the Timbren Trailer Suspension Enhancement System with Under Steel Frame 10,000 lbs # TTRA15252. Finally, you may want to consider the Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 7,000 lbs # TSR7000T05 which replaces leaf spring suspension systems.
    view full answer...
  • Can the Lippert Components Bolt-On Shock Kit Be Used On a C-Channel Frame
    Yes, the Lippert Components Bolt-On Shock Kit part # LC281255 will work just fine with your c-channel frame. The upper bracket extends the shock mount away from the lip on your frame rail so there won't be any issues with clearance. It is actually designed for i-beam frames so your c-channel won't be an issue either.
    view full answer...
  • Which is Better The Roadmaster Trailer Shock Kit or the Lippert Kit and Why
    The Roadmaster Comfort Ride System part # RM-2450 will give you a smoother ride than the Lippert system part # LC281255 that you also mentioned. Our customers prefer the Roadmaster over the Lippert also because of the ease of install too. Some people who have tried the Lippert kit had to get more creative with the mounts whereas the Roadmaster is a more straightforward install. Both of these kits are for 3,500 lb axles. The more vertical angle of the Roadmaster shocks allows them to function...
    view full answer...
    Image 1 for
  • How to Install Lippert Bolt-On Shock Mount Kit LC281255
    I will be happy to explain how to install the shock kit # LC281255. In addition to the instructions below I have also included a picture of the actual instructions. 1. Raise trailer and jack up the axle to release pressure on the springs. 2. Remove old u-bolts and tie plate. 3. Install new tie plate with the longer side facing outward and torque the u-bolts to the specs in the instructions. NOTE: Do NOT reuse old components. 4. Compress the shock and make a mark on the inner shock where...
    view full answer...
    Image 1 for
  • Is there a Shock Kit that Will Fit 2007 Keystone Cougar 5th Wheel Model 276RLS
    A shock kit will help quite a bit to smooth out the ride quality in your 2007 Keystone Cougar 5th wheel model 276RLS. You'll need to measure the diameter of your axles to know which kit you'll need. If you have 2-3/8 inch axles which are typically 3,500 lb axles you'd need the # LC281255 of if you have 3 inch diameter axles like most 5,200-7k axles you'd need the part # LC281281.
    view full answer...


< Previous
123. . .8



Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Cole B
Installed by:
Cole B
Employee Kathleen M
Updated by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Chelsea B
Written by:
Chelsea B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924