See what our Experts say about this Yakima Roof Rack

• Can Two Thule Hullavators Be Installed On The Roof Of A 2026 Subaru Outback Wilderness?
  Hi Robert! Sweet kayaks! Using two of the Thule Hullavators # TH898 on the roof of your 2026 Subaru Outback Wilderness is looking like it may be a no-go. With them being 36" wide, you would need to have at least 68" of useable crossbar length. You could technically get this with the Yakima CoreBar Crossbars - Steel - Black - 70" Long - Qty 2 # Y00423 and the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR, but you would have a lot of overhang. With the Hullavator,...
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Roof Rack Kit For Carrying A Thule Hullavator On A 2024 Toyota Corolla Cross
  Hi Jennifer! You want 4" to 8" of crossbar after the tower in order for a Thule Hullavator # TH898 to not make contact with the vehicle when in the lowered position. Since you mentioned the roof on your 2024 Toyota Corolla Cross being narrow compared to the body, I would recommend going as wide as you can, just to be sure. With that said, I have 70" crossbar options listed below. You didn't mention if your Corolla Cross had flush mounted rails running from the front to the back or if you...
  view full answer...
• Is Thule Hullavator Kayak Carrier Compatible with Yakima CoreBar Crossbars
  The Thule Hullavator Pro Kayak Carrier # TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit # TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work correctly and avoid contacting your vehicle. I have attached a photo showing how to make sure your CoreBar is long enough. If you happen to need longer CoreBar crossbars we have them available here: 50" - # Y00421 60" - # Y00422 70" - # Y00423 80" - # Y00424
  view full answer...
  
• Are Rhino-Rack and Yakima Lock Cores Interchangeable for a 2013 Ram 2500
  The Rhino-Rack key and lock systems are not interchangeable with the Yakima SKS lock systems. I noticed you are looking at # Y02-500B which mounts in tracks. The tracks would have to be installed by drilling into the vehicle roof. If you want to avoid that and still have a Yakima rack you can look at other roof rack options for your 2013 Ram 2500. Provided that the truck has the Crew Cab you can use the following Yakima roof rack parts: JetStream Bars # Y00427 or CoreBars # Y00423 BaseLine...
  view full answer...
• Fit of Thule TH898 Hullavator on 2019 Subaru Ascent
  In order for the Thule # TH898 Hullavator to work on your roof rack, the crossbars will need to extend at least 4-8 inches beyond the roof rack feet as shown in the provided diagram. If you already have the factory crossbars, you'll need to remove them and install aftermarket crossbars to get the proper length. The Malone AirFlow 2, part # MPG217 would likely work, but you'd need to measure the outside side to outside distance of the rails on the roof of your Ascent. If this distance is...
  view full answer...
  
• Yakima Towers Needed to Mount to Landing Pad 1 on Track System
  It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
  view full answer...
  
• How To Mount Both a Cargo Box and Surf Board On a 2020 Subaru Forester
  I have some great roof rack options for a 2020 Subaru Forester. The best size will really come down to what you are looking to carry. I have attached a nice chart below that gives some better insight on this. As you can see, in order to carry both a cargo box and surf board you'll need super long crossbars which is possible but they will extend out from the vehicle very far. The Yakima CoreBar System will allow you to choose the crossbar length so this is what I recommend, part # Y33TR...
  view full answer...
  
• Roof Rack Recommendation for 2019 Ram 1500 with Panoramic Roof
  For a roof setup like what you have on your 2019 Ram 1500 I would much rather recommend you a roof rack that installs by grabbing the door frames like the Yakima Corebar rack part numbers # Y00423, # Y28TR, # Y06135 as we know this will work great on your truck and wouldn't possibly interfere with the panoramic roof or side air bags. Plus there's no permanent modification to the truck either.
  view full answer...
• Solution for Carrying Multiple Bikes on Roof of 2021 Ford F250
  We absolutely have roof rack options for your 2021 Ford F250. Beginning with the roof rack, I'd recommend the Yakima CoreBar roof rack which would be assembled using these parts: • Yakima 70 inch CoreBar crossbars, part # Y00423 • Yakima BaseLine Towers, part # Y28TR • Yakima Vehicle-Specific fit kit, part # Y06185 With a 70 inch long crossbar, you'll be able to fit up to 5 bikes on the roof, but keep in mind that the roof rack has a 165 lb weight capacity, so unless your bikes are really...
  view full answer...
• Can 70 Inch Yakima JetStream Crossbars be Cut on 2021 Ford F-350 Crew Cab
  We have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following: - Yakima CoreBar Crossbars # Y00423 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06185 I do recommend considering locks...
  view full answer...
• Parts Needed to Install Yakima Corebar Roof Rack on Camper Shell
  Along with the Yakima fit kit part # Y01135 you'd also need four of the Skyline towers # 8880614, the Yakima Corebar Crossbars # Y00423 and you'd be set. I attached a picture of the install instructions for you to check out as well.
  view full answer...
  
• How To Carry a Kayak and Canoe on a 2019 Ram 1500 While Towing
  In order to carry a canoe and or kayak on your 2019 Ram 1500 I recommend placing them on a roof rack with a roof mounted carrier as you don't really have any other options when towing a trailer. For a roof rack, I recommend the Yakima CoreBar Crossbar System which is composed of part # Y00423, part # Y28TR, and part # Y06135. This system has aero shaped cross bars for reduced wind noise and a sleek look. In order to secure a canoe and or kayak to the above roof rack, I recommend using...
  view full answer...
• How to Use Longer Yakima or Thule Crossbars for a 2009 Dodge Journey
  If you have longer bars from Yakima, like the 70" JetStream part # Y00427OR the 70" CoreBar # Y00423, then all you need for your 2009 Dodge Journey are the TimberLine Towers # Y33TR. If you happen to have Yakima round bars then you need the adapter # Y03536 as well. For your Thule bars you will need to use the Evo Raised Rail Feet # TH710401 with the 69" ProBar Evo Crossbars # TH713600 as the aero-style Thule bars have a limited mounting space underneath them and I don't think it will...
  view full answer...
  
• How to Transport 4 Kayaks on 2018 GMC Sierra Short Bed with Tonneau Cover
  I do have a way for you to transport your 4 kayaks with your 2018 GMC Sierra 1500 but unfortunately you won't be able to add crossbars or a ladder rack system to the truck bed with the tonneau cover installed. Any truck bed crossbar system will require mounting space either on the inside of the rails or on top of them and it looks like your cover would interfere with either of these designs. Because of this your only option (if you want to keep the tonneau cover) is to go with a roof...
  view full answer...
  
• Can the Thule Hullavator Kayak Carrier TH897 Be Used With Aero Crossbars
  I do have an option for you but there is not any sort of adapter that will allow the Thule Hullavator Kayak Carrier TH897 to be used with the Yakima CoreBar Crossbars like part # Y00423. The most cost effective option I have for you to use the Thule Hullavator Kayak Carrier is to switch out the Yakima CoreBar Crossbars for the Yakima JetStream Crossbars like part # Y00426 and then obtain the Thule Hullavator Kayak Carrier 897 Track Mount Adapter part 7521383001 from Thule. If you don't...
  view full answer...
• Do Yakima Core Bars fit Thule Tracks on Leer Cap
  A Yakima rack with CoreBars is compatible with the Thule tracks on the Leer cap of your 2016 Toyota Tacoma. To install the rack, you would need the following parts: Two of the Landing Pad 1 for Yakima Control Towers # Y00221 SkyLine Towers for Yakima Crossbars # Y53TR The Yakima CoreBars you need would depend on the width of your Leer cap; your options are Yakima CoreBar Crossbars 50" Long # Y00421 Yakima CoreBar Crossbars 60" Long # Y00422 Yakima CoreBar Crossbars 70" Long # Y00423 I...
  view full answer...
  
• Can Two Sets of Yakima Y04073 JayLow Kayak Carriers Fit on 2018 Toyota Highlander Factory Roof Rack
  Each of the # Y04073 JayLow kayak carriers will take up approximately 10.3 inches of space on the crossbar. Factory crossbars won't extend past the roof side rails, so even though you should be able to fit two sets of the carriers on the roof, you might not be able to place them far enough apart on the crossbars to accommodate the two kayaks you'll want to place in the center. What I'd recommend you do is measure the length of your factory crossbars, and compare that to the combined width...
  view full answer...
• Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500
  You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following: - Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2) - SkyLine Towers for Yakima Crossbars # Y53TR Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then choose...
  view full answer...
• Rail Upgrade For Pace Edwards JackRabbit Tonneau Cover On A 2015 Chevrolet Silverado 2500
  If you have the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-TR5117, you can use the: -Replacement Explorer Rails for Pace Edwards JackRabbit Hard Tonneau Cover # 311-TE5117 in place of your Replacement Standard Rails for Pace Edwards JackRabbit Hard Tonneau Cover # 311-TR5117. The new Explorer Rails have the integrated t-slot so you can use t-slot mounted accessories like the Yakima CoreBar Crossbars # Y00423.
  view full answer...
• RetraxONE XR Rail Compatible Roof Rack For Tent
  Yakima offers a great solution that is compatible with the rails provided by your RetraxONE XR tonneau cover. The rack would assemble using the following parts: • Yakima 70 inch wide CoreBar crossbars, part # Y00423 • Yakima SkyLine Towers, part # Y53TR • Yakima Landing Pad 1, part # Y00221 (sold in pairs, you'll need 2 pairs) This rack setup has a HUGE 600 lb static (when vehicle is NOT in motion) weight capacity, so it'll work great for a tent.
  view full answer...
• Aero-Style Roof Rack for 2018 Chevrolet Silverado 2500 Double Cab
  Your 2018 Chevrolet Silverado 2500 HD Double Cab can be fitted with a quieter aero type of black roof rack. All options for a black aero rack for your truck appear on the linked page. These include racks that have shorter crossbars that terminate in the rack feet as well as racks with much longer bars that extend out past the rack feet for more cargo spare. The Rhino-Rack Vortex system # RR57XR has these shorter flush bars that many consider to look more like an OEM rack, while the longer...
  view full answer...
• Yakima CoreBars, Towers and Landing Pads for Yakima Tracks Mounted On an RV Roof
  You will need 4 of the SkyLine Towers # 8880614 to attach your Yakima CoreBar Crossbars # Y00423 to your Yakima Tracks # Y01135 on your RV. These will fit with the Yakima Landing Pads # Y00221.
  view full answer...
• Will the Inno Kayak Lifter Load Assist Part # INA453 Work with a Yakima Roof Rack
  Yes, the Inno Kayak Lifter Load Assist part # INA453 will work with all of the Yakima crossbars which includes the Yakima JetStream Crossbars like part # Y00425, the Yakima CoreBar Crossbars like part # Y00423, and the Yakima Round Crossbars like part # Y00408.
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Recommended Way to Carry a Kayak for a Ford F-150
  As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• What do I need to setup a Thule Hullavator on Yakima JetStream Crossbars on a 26 Toyota Highlander?
  Great choice Peter, that combo works very well together! Since you already have 60" Yakima JetStream crossbars # Y00428 and a Thule Hullavator # TH898 , you’re most of the way there. The key now is just getting the correct tower and fit kit for your 2026 Highlander roof type. If the Highlander has "Flush Rails" this is the correct fit kit # Y53TR Yakima SkyLine Roof Rack Towers for JetStream Crossbars - Qty 4 # Y66VR Yakima Landing Pad 28 If the Highlander has "No Rails" this is the...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Do You Have a Roof Rack for a 2017 Nissan Murano S?
  Yes, we do carry a crossbar system that will work with your bare-roof 2017 Nissan Murano S. For a complete system, you need the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06126 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - (optional for extra security) Yakima Same-Key System...
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Recommendation for Transporting 5 Bikes on a 2019 Ford Fiesta Hatchback
  The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those...
  view full answer...
• BaseClip Fit Kit For a 2000 Ford F-350 Super Duty SuperCab or Crew Cab
  Your 2000 Ford F-350 with either the SuperCab or Crew Cab will need the BaseClip Fit Kit # Y79QR. The Kit # Y06192 you found is for a Lexus RZ. We do have the Yakima BaseLine Roof Rack # Y26KB which will include the crossbars, towers and fit kit for you to install on your roof.
  view full answer...
• Recommended Yakima 1/2 Roof Rack for 2010 Ford F-250 Crew Cab
  Yes, we do offer half roof rack systems for a 2010 Ford F-250. I recommend the JetStream which has an aero shape and integrated slots for use with channel accessories. I have attached the parts you will need for this below. Yakima JetStream Crossbar part # 8880650 BaseLine Towers for Yakima Crossbars part # Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y79QR
  view full answer...
• Recommended Roof Rack And Roof Basket For 2004 Ford F-250 w/ Naked Roof
  Since your 2004 Ford F-250 Crew Cab has a naked roof without side rails, I recommend going with Yakima JetStream Crossbars item # Y00426, along with Towers item # Y28TR, and the BaseClip Fit Kit item # Y79QR. This is an aerodynamic roof rack that has less noise and vibration than other roof rack setups. It features the common T-slot channel on top for accessories to be easily installed. You can also add Locks item # Y07204 to secure the rack to your roof. To add a cargo basket you will...
  view full answer...
• Is There a Replacement For Yakima Base Clip 200
  I can do you one better, and instead of an exact match, I can get you the Yakima Base Clip 200, which is the following part number: - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y79QR I did verify directly with Yakima that this is the Base Clip 200.
  view full answer...
• Recommended Roof Rack for a 2011 Ford F-250 Crew Cab Using a Yakima Cargo Basket
  It is a lot of information. The best way to add a set of crossbars to mount the Yakima OffGrid Roof Cargo Basket item # Y07139-09 to the roof of your 2011 Ford F-250 crew cab is to use the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y49UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y79QR This is a flush mounted roof rack that does not extend over the sides...
  view full answer...
• Roof Rack Recommendation for 2007 Ford F-350 Super Duty
  The Whispbar roof racks were discontinued awhile back, so unfortunately we won't be getting any more of the K469 clamp kits in. To provide a roof rack on your 2007 Ford F-250, I'd recommend a Yakima JetStream roof rack that would be assembled from the following parts: • 70 Inch JetStream Aero-Style Crossbar, part # Y00427 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima Vehicle-Specific Fit Clips, part # Y79QR I've linked to a product demonstration video featuring the Yakima...
  view full answer...
• How Many Crossbars Does a Yakima Fit Kit Work With
  You are correct the Yakima Fit Kits like part # Y79QR are sold in pairs or a single crossbar. So to do a setup that includes both crossbars you'd need a quantity of 2 fit kits.
  view full answer...
• Can I Get The Yakima BaseClip 200
  Yes, we do carry the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y79QR. These are the BaseClip 200 that will fit your 2001 Ford F-250 Super Duty. I have included a product description link below.
  view full answer...
• BaseClip Fit Kit For a 2000 Ford F-350 Super Duty SuperCab or Crew Cab
  Your 2000 Ford F-350 with either the SuperCab or Crew Cab will need the BaseClip Fit Kit # Y79QR. The Kit # Y06192 you found is for a Lexus RZ. We do have the Yakima BaseLine Roof Rack # Y26KB which will include the crossbars, towers and fit kit for you to install on your roof.
  view full answer...
• Recommended Yakima 1/2 Roof Rack for 2010 Ford F-250 Crew Cab
  Yes, we do offer half roof rack systems for a 2010 Ford F-250. I recommend the JetStream which has an aero shape and integrated slots for use with channel accessories. I have attached the parts you will need for this below. Yakima JetStream Crossbar part # 8880650 BaseLine Towers for Yakima Crossbars part # Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y79QR
  view full answer...
• Recommended Roof Rack And Roof Basket For 2004 Ford F-250 w/ Naked Roof
  Since your 2004 Ford F-250 Crew Cab has a naked roof without side rails, I recommend going with Yakima JetStream Crossbars item # Y00426, along with Towers item # Y28TR, and the BaseClip Fit Kit item # Y79QR. This is an aerodynamic roof rack that has less noise and vibration than other roof rack setups. It features the common T-slot channel on top for accessories to be easily installed. You can also add Locks item # Y07204 to secure the rack to your roof. To add a cargo basket you will...
  view full answer...
• Is There a Replacement For Yakima Base Clip 200
  I can do you one better, and instead of an exact match, I can get you the Yakima Base Clip 200, which is the following part number: - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y79QR I did verify directly with Yakima that this is the Base Clip 200.
  view full answer...
• Recommended Roof Rack for a 2011 Ford F-250 Crew Cab Using a Yakima Cargo Basket
  It is a lot of information. The best way to add a set of crossbars to mount the Yakima OffGrid Roof Cargo Basket item # Y07139-09 to the roof of your 2011 Ford F-250 crew cab is to use the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y49UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y79QR This is a flush mounted roof rack that does not extend over the sides...
  view full answer...
• Roof Rack Recommendation for 2007 Ford F-350 Super Duty
  The Whispbar roof racks were discontinued awhile back, so unfortunately we won't be getting any more of the K469 clamp kits in. To provide a roof rack on your 2007 Ford F-250, I'd recommend a Yakima JetStream roof rack that would be assembled from the following parts: • 70 Inch JetStream Aero-Style Crossbar, part # Y00427 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima Vehicle-Specific Fit Clips, part # Y79QR I've linked to a product demonstration video featuring the Yakima...
  view full answer...
• How Many Crossbars Does a Yakima Fit Kit Work With
  You are correct the Yakima Fit Kits like part # Y79QR are sold in pairs or a single crossbar. So to do a setup that includes both crossbars you'd need a quantity of 2 fit kits.
  view full answer...
• Can I Get The Yakima BaseClip 200
  Yes, we do carry the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y79QR. These are the BaseClip 200 that will fit your 2001 Ford F-250 Super Duty. I have included a product description link below.
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...

Do you have a question about this Roof Rack?