See what our Experts say about this Yakima Roof Rack

• Can Two Thule Hullavators Be Installed On The Roof Of A 2026 Subaru Outback Wilderness?
  Hi Robert! Sweet kayaks! Using two of the Thule Hullavators # TH898 on the roof of your 2026 Subaru Outback Wilderness is looking like it may be a no-go. With them being 36" wide, you would need to have at least 68" of useable crossbar length. You could technically get this with the Yakima CoreBar Crossbars - Steel - Black - 70" Long - Qty 2 # Y00423 and the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR, but you would have a lot of overhang. With the Hullavator,...
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Roof Rack Kit For Carrying A Thule Hullavator On A 2024 Toyota Corolla Cross
  Hi Jennifer! You want 4" to 8" of crossbar after the tower in order for a Thule Hullavator # TH898 to not make contact with the vehicle when in the lowered position. Since you mentioned the roof on your 2024 Toyota Corolla Cross being narrow compared to the body, I would recommend going as wide as you can, just to be sure. With that said, I have 70" crossbar options listed below. You didn't mention if your Corolla Cross had flush mounted rails running from the front to the back or if you...
  view full answer...
• Is Thule Hullavator Kayak Carrier Compatible with Yakima CoreBar Crossbars
  The Thule Hullavator Pro Kayak Carrier # TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit # TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work correctly and avoid contacting your vehicle. I have attached a photo showing how to make sure your CoreBar is long enough. If you happen to need longer CoreBar crossbars we have them available here: 50" - # Y00421 60" - # Y00422 70" - # Y00423 80" - # Y00424
  view full answer...
  
• Are Rhino-Rack and Yakima Lock Cores Interchangeable for a 2013 Ram 2500
  The Rhino-Rack key and lock systems are not interchangeable with the Yakima SKS lock systems. I noticed you are looking at # Y02-500B which mounts in tracks. The tracks would have to be installed by drilling into the vehicle roof. If you want to avoid that and still have a Yakima rack you can look at other roof rack options for your 2013 Ram 2500. Provided that the truck has the Crew Cab you can use the following Yakima roof rack parts: JetStream Bars # Y00427 or CoreBars # Y00423 BaseLine...
  view full answer...
• Fit of Thule TH898 Hullavator on 2019 Subaru Ascent
  In order for the Thule # TH898 Hullavator to work on your roof rack, the crossbars will need to extend at least 4-8 inches beyond the roof rack feet as shown in the provided diagram. If you already have the factory crossbars, you'll need to remove them and install aftermarket crossbars to get the proper length. The Malone AirFlow 2, part # MPG217 would likely work, but you'd need to measure the outside side to outside distance of the rails on the roof of your Ascent. If this distance is...
  view full answer...
  
• How To Mount Both a Cargo Box and Surf Board On a 2020 Subaru Forester
  I have some great roof rack options for a 2020 Subaru Forester. The best size will really come down to what you are looking to carry. I have attached a nice chart below that gives some better insight on this. As you can see, in order to carry both a cargo box and surf board you'll need super long crossbars which is possible but they will extend out from the vehicle very far. The Yakima CoreBar System will allow you to choose the crossbar length so this is what I recommend, part # Y33TR...
  view full answer...
  
• Yakima Towers Needed to Mount to Landing Pad 1 on Track System
  It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
  view full answer...
  
• Roof Rack Recommendation for 2019 Ram 1500 with Panoramic Roof
  For a roof setup like what you have on your 2019 Ram 1500 I would much rather recommend you a roof rack that installs by grabbing the door frames like the Yakima Corebar rack part numbers # Y00423, # Y28TR, # Y06135 as we know this will work great on your truck and wouldn't possibly interfere with the panoramic roof or side air bags. Plus there's no permanent modification to the truck either.
  view full answer...
• Solution for Carrying Multiple Bikes on Roof of 2021 Ford F250
  We absolutely have roof rack options for your 2021 Ford F250. Beginning with the roof rack, I'd recommend the Yakima CoreBar roof rack which would be assembled using these parts: • Yakima 70 inch CoreBar crossbars, part # Y00423 • Yakima BaseLine Towers, part # Y28TR • Yakima Vehicle-Specific fit kit, part # Y06185 With a 70 inch long crossbar, you'll be able to fit up to 5 bikes on the roof, but keep in mind that the roof rack has a 165 lb weight capacity, so unless your bikes are really...
  view full answer...
• Parts Needed to Install Yakima Corebar Roof Rack on Camper Shell
  Along with the Yakima fit kit part # Y01135 you'd also need four of the Skyline towers # 8880614, the Yakima Corebar Crossbars # Y00423 and you'd be set. I attached a picture of the install instructions for you to check out as well.
  view full answer...
  
• Can 70 Inch Yakima JetStream Crossbars be Cut on 2021 Ford F-350 Crew Cab
  We have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following: - Yakima CoreBar Crossbars # Y00423 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06185 I do recommend considering locks...
  view full answer...
• How To Carry a Kayak and Canoe on a 2019 Ram 1500 While Towing
  In order to carry a canoe and or kayak on your 2019 Ram 1500 I recommend placing them on a roof rack with a roof mounted carrier as you don't really have any other options when towing a trailer. For a roof rack, I recommend the Yakima CoreBar Crossbar System which is composed of part # Y00423, part # Y28TR, and part # Y06135. This system has aero shaped cross bars for reduced wind noise and a sleek look. In order to secure a canoe and or kayak to the above roof rack, I recommend using...
  view full answer...
• How to Transport 4 Kayaks on 2018 GMC Sierra Short Bed with Tonneau Cover
  I do have a way for you to transport your 4 kayaks with your 2018 GMC Sierra 1500 but unfortunately you won't be able to add crossbars or a ladder rack system to the truck bed with the tonneau cover installed. Any truck bed crossbar system will require mounting space either on the inside of the rails or on top of them and it looks like your cover would interfere with either of these designs. Because of this your only option (if you want to keep the tonneau cover) is to go with a roof...
  view full answer...
  
• How to Use Longer Yakima or Thule Crossbars for a 2009 Dodge Journey
  If you have longer bars from Yakima, like the 70" JetStream part # Y00427OR the 70" CoreBar # Y00423, then all you need for your 2009 Dodge Journey are the TimberLine Towers # Y33TR. If you happen to have Yakima round bars then you need the adapter # Y03536 as well. For your Thule bars you will need to use the Evo Raised Rail Feet # TH710401 with the 69" ProBar Evo Crossbars # TH713600 as the aero-style Thule bars have a limited mounting space underneath them and I don't think it will...
  view full answer...
  
• Can the Thule Hullavator Kayak Carrier TH897 Be Used With Aero Crossbars
  I do have an option for you but there is not any sort of adapter that will allow the Thule Hullavator Kayak Carrier TH897 to be used with the Yakima CoreBar Crossbars like part # Y00423. The most cost effective option I have for you to use the Thule Hullavator Kayak Carrier is to switch out the Yakima CoreBar Crossbars for the Yakima JetStream Crossbars like part # Y00426 and then obtain the Thule Hullavator Kayak Carrier 897 Track Mount Adapter part 7521383001 from Thule. If you don't...
  view full answer...
• Do Yakima Core Bars fit Thule Tracks on Leer Cap
  A Yakima rack with CoreBars is compatible with the Thule tracks on the Leer cap of your 2016 Toyota Tacoma. To install the rack, you would need the following parts: Two of the Landing Pad 1 for Yakima Control Towers # Y00221 SkyLine Towers for Yakima Crossbars # Y53TR The Yakima CoreBars you need would depend on the width of your Leer cap; your options are Yakima CoreBar Crossbars 50" Long # Y00421 Yakima CoreBar Crossbars 60" Long # Y00422 Yakima CoreBar Crossbars 70" Long # Y00423 I...
  view full answer...
  
• Can Two Sets of Yakima Y04073 JayLow Kayak Carriers Fit on 2018 Toyota Highlander Factory Roof Rack
  Each of the # Y04073 JayLow kayak carriers will take up approximately 10.3 inches of space on the crossbar. Factory crossbars won't extend past the roof side rails, so even though you should be able to fit two sets of the carriers on the roof, you might not be able to place them far enough apart on the crossbars to accommodate the two kayaks you'll want to place in the center. What I'd recommend you do is measure the length of your factory crossbars, and compare that to the combined width...
  view full answer...
• Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500
  You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following: - Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2) - SkyLine Towers for Yakima Crossbars # Y53TR Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then choose...
  view full answer...
• RetraxONE XR Rail Compatible Roof Rack For Tent
  Yakima offers a great solution that is compatible with the rails provided by your RetraxONE XR tonneau cover. The rack would assemble using the following parts: • Yakima 70 inch wide CoreBar crossbars, part # Y00423 • Yakima SkyLine Towers, part # Y53TR • Yakima Landing Pad 1, part # Y00221 (sold in pairs, you'll need 2 pairs) This rack setup has a HUGE 600 lb static (when vehicle is NOT in motion) weight capacity, so it'll work great for a tent.
  view full answer...
• Rail Upgrade For Pace Edwards JackRabbit Tonneau Cover On A 2015 Chevrolet Silverado 2500
  If you have the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-TR5117, you can use the: -Replacement Explorer Rails for Pace Edwards JackRabbit Hard Tonneau Cover # 311-TE5117 in place of your Replacement Standard Rails for Pace Edwards JackRabbit Hard Tonneau Cover # 311-TR5117. The new Explorer Rails have the integrated t-slot so you can use t-slot mounted accessories like the Yakima CoreBar Crossbars # Y00423.
  view full answer...
• Are the Yakima 60 Inch Tracks for Roof Racks Compatible on a 1997 VW Eurovan Camper
  The Yakima 60 inch Roof Tracks, # Y01135, are designed to allow you to connect a roof rack system on atypical vehicles or campers/trailers. If you have the clearance for the 60 inch long tracks, then the Yakima tracks will mount to your Eurovan. You will need to use the SkyLine Towers, # Y00148, to attach any of the Yakima crossbars to the track system. Also, the Yakima Landing Pad 1, # Y00221, is needed to attach the SkyLine towers to the track rack. The Landing Towers are sold in the...
  view full answer...
• What Do I Need To Attach A Yakima Rack To My RetraxPro Tonneau Cover
  Your RetraxPro tonneau cover comes with T-slots. The Yakima rack that is compatible with t-slots will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 70" Long - Qty 2, part # Y00423, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2. part # Y00221, X 2 Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204 This rack will have a weight limit of 220 lbs. The Yakima CoreBars are elliptical in shape...
  view full answer...
• Aero-Style Roof Rack for 2018 Chevrolet Silverado 2500 Double Cab
  Your 2018 Chevrolet Silverado 2500 HD Double Cab can be fitted with a quieter aero type of black roof rack. All options for a black aero rack for your truck appear on the linked page. These include racks that have shorter crossbars that terminate in the rack feet as well as racks with much longer bars that extend out past the rack feet for more cargo spare. The Rhino-Rack Vortex system # RR57XR has these shorter flush bars that many consider to look more like an OEM rack, while the longer...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• What Yakima Pads and Clamps do I Need for My 2019 Ford F-250 to Use My Baseline Feet?
  Hello Michael, I am glad you wrote in, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y27FR that you were looking at is for a Ford F-150. For your 2019 Ford F-250 (vehicle that was put into the fit guide) you will want to order (2) sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06185. How did end up with the feet and no pads, did you take them off of an old vehicle? What do you plan on using your roof rack for?
  view full answer...
• Fitment of the Thule Pulse M # TH614 with Yakima JetStream Crossbars on a 2002 Audi A4 Sedan
  Yes! If you have Yakima JetStream Crossbars installed on your 2002 Audi A4 Sedan with a bare roof, the Thule Pulse M # TH614 can clamp onto the crossbars with no problems. This is because the height and width of the JetStream crossbars are the exact same as the Thule WingBar Evo Crossbars. If you need a complete roof rack, you need the following components: - Yakima JetStream Crossbars - Black - 50" Long # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - 2 sets...
  view full answer...
• Solution for Using Yakima RoundBar Crossbars With Q-Towers on 2024 Silverado
  Hi John; Yakima moved away from using the Q-Towers back in 2016. This means there are no Q-Clips that will fit your 2024 Silverado. Assuming you have a 1500/2500/3500 with the Crew Cab or Double Cab you will need the BaseLine Towers for Yakima Crossbars # Y28TR. You will also need the BaseClip Fit kit. For the 1500 that will be two of the # Y06110 and for the 2500/3500 the # Y27FR and # Y06124. The last thing you will need is the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Silverado 2500 Crew Cab
  To add a roof rack to your 2024 Chevrolet Silverado 2500 Crew Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 I have attached a couple of pictures below that will give you an idea of what this system will...
  view full answer...
  
• How to Add Crossbars to a 2024 GMC Sierra 3500
  To add a roof rack to your 2024 GMC Sierra 3500 Crew Cab or Double Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Which Yakima BaseClips Fit 2021 Ford F-150
  I checked with Yakima and for the 2021 Ford F-150 the correct Baseclips are the 197 clips part number # Y27FR.
  view full answer...
• Can Old Yakima Round Crossbars And Q Towers Be Used With New System On 2024 GMC Sierra 2500HD?
  Hey there Bill, I got good news and some bad news. The good news is that we can piece together a kit and you can re-use your old Yakima crossbars since they are the same diameter as the new ones. The bad news is that you are correct in saying the Q towers won't work with your new vehicle so you'll need the new ones. The complete kit for your 2024 GMC Sierra 2500HD with naked roof is as follows, and remember you already have the crossbars so you technically do not need to buy more: -Yakima...
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Silverado 2500
  To add a set of crossbars to the roof of your 2024 Chevy Silverado 2500, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. It fits both the crew cab and double...
  view full answer...
• Yakima Towers & Fit Kit For 2023 Ford F-150 SuperCrew For Yakima Round Crossbars
  Hi there Dale; yes you can absolutely just get the towers and fit kit for your 2023 Ford F-150 SuperCrew from Yakima to utilize your round crossbars. All you need is the following: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y27FR - RoundBar SL Adapter # Y03536
  view full answer...
• What Are the Dimensions of the Yakima BaseLine Towers With the Crossbars and BaseClip
  Kason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8".
  view full answer...
• Roof Rack Recommendation for 2024 Chevy Silverado 3500HD to Carry Yakima Showdown
  Hey Ross so I would recommend going with a Yakima JetStream roof rack for your 2024 Chevy Silverado 3500HD that consists of part numbers # Y00426, # Y28TR, # Y27FR, # Y06124 as we have found the Jetstream racks are the nicest and easiest to use. And we also know the Yakima Showdown part # Y04081 was tested with this rack and works great as well.
  view full answer...
• How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel Towing
  Generally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
  view full answer...
• Will Crossbars Interfere With The Panoramic Sunroof Of A 2023 Ford F-150
  Yes, any roof rack, including the Yakima BaseLine FX Roof Rack for Naked Roofs # Y56UV, would most likely prevent you from being able to open your panoramic sunroof. Even if the crossbars clear the glass there's always the chance that whatever weight you out on top of them could cause them to dip down enough and touch so roof rack manufacturers don't ever approve of opening the sunroof while the crossbars are installed. If you'd still like to use these crossbars then you'll also need...
  view full answer...
• Roof Rack Recommendation with Longer Crossbars for 2020 Chevy Silverado 3500 Long Bed
  Yakima has roof racks that do fit your 2020 Chevy Silverado 3500 Crew Cab like the HD bar rack part numbers # Y01157, # Y28TR, # Y03541, # Y27FR, and # Y06124 which gives you a 60 inch bar setup with plenty of weight capacity. This would be best way to carry the accessories you have now as the ladder racks have wider bars than what standard roof rack accessories can fit. Then for a fold up tonneau cover the BAKFlip F1 part # BAK37FR would be a really great option as well that is confirmed...
  view full answer...
• 70 Crossbar Recommendations to Use Thule Hullavator on a 2021 Ford F-150 Supercab
  Yes! In order to have the 70-inch crossbars to use with a Hullavator # TH898 on your 2021 Ford F-150 Supercab, I recommend the following parts: - Yakima JetStream Crossbars - 70" # Y00427 - Yakima BaseLine Towers # Y28TR - 2 sets of the BaseClip Fit Kit # Y27FR - Yakima Same-Key Locks # Y07204 Not only do you receive an extremely aerodynamic system on your roof with the JetStream crossbars, you also have the required 4 inches of length past the feet in order for the Thule Hullavator...
  view full answer...
• Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500
  For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
  view full answer...
• BaseClip Fit Kit for a Yakima Roof Rack on a 2022 Ford F-150
  I would be happy to help you. To attach the BaseLine Towers for Yakima Crossbars item # Y00146 to your 2022 Ford F-150 naked roof you will need the following parts: HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y27FR The correct crossbars are item # Y01157.
  view full answer...
• Recommended Roof Rack for a 2020 Chevrolet Silverado 3500
  The roof rack I recommend for a 2020 Chevrolet Silverado 3500 is the Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, part # Y06124, and part # Y27FR. This is an excellent option and will work well with the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 so long as you alternate their direction. The system is a custom fit so it will look nice on the roof of a new vehicle and it has aero crossbars for the best wind resistance.
  view full answer...
• Trailer Hitch or Roof Mount Cargo Carrier for a 2014 Kia Cadenza
  The Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs # Y62VR is a great carrier, but it will not work for your 2014 Kia Cadenza. The only hitch available for your Kia is the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12118. This hitch will only work with accessories for 1-1/4" receivers. The Yakima EXO requires a 2" hitch. If you install the Curt hitch # C12118 on your Kia, you could use a cargo carrier like the 20x47 Reese Cargo Carrier...
  view full answer...
• Yakima Roof Rack Parts for a 2015 Kia Cadenza
  The Yakima parts needed to install a roof rack on your 2015 Kia Cadenza are the following: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y27FR and # Y06126 - Lock Core Kit # Y07204 The "Y27FR" is our number for the BaseClip 197 you referenced.
  view full answer...
• Recommended Roof Rack Components To Mount A Yakima ReelDeal To A 2021 Ford F-150
  The Yakima ReelDeal Rooftop Fishing Rod Carrier # Y04089 is compatible with round bars so to get them attached to your Yakima Round Bars # Y00409 and onto the naked roof of your 2021 Ford F-150 you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y27FR
  view full answer...
• Solution for Using Yakima RoundBar Crossbars With Q-Towers on 2024 Silverado
  Hi John; Yakima moved away from using the Q-Towers back in 2016. This means there are no Q-Clips that will fit your 2024 Silverado. Assuming you have a 1500/2500/3500 with the Crew Cab or Double Cab you will need the BaseLine Towers for Yakima Crossbars # Y28TR. You will also need the BaseClip Fit kit. For the 1500 that will be two of the # Y06110 and for the 2500/3500 the # Y27FR and # Y06124. The last thing you will need is the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Silverado 2500 Crew Cab
  To add a roof rack to your 2024 Chevrolet Silverado 2500 Crew Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 I have attached a couple of pictures below that will give you an idea of what this system will...
  view full answer...
  
• How to Add Crossbars to a 2024 GMC Sierra 3500
  To add a roof rack to your 2024 GMC Sierra 3500 Crew Cab or Double Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Roof Rack for 2017 Chevy Spark
  There is a roof rack option for your 2017 Chevy Spark but the SportRack # SR1002 is not a fit. Instead, I recommend an option from Yakima. This rack consists of the Yakima CoreBar Crossbars # Y00421, BaseLine Towers # Y28TR, and Fit Kit # Y06124; you can lock this roof rack with SKS Lock Cores # Y07204. This will give you an aero roof rack that helps reduce the amount of wind noise you might otherwise encounter.
  view full answer...
  
• Parts For Single Bar Roof Rack & Single Bar Ladder Rack on Retrax XR Tonneau on 2024 GMC Sierra 3500
  Okay, this is going to be quite a few parts but I'll go ahead and list out everything for a single bar roof rack and single bar ladder rack for your 2024 GMC Sierra 3500 and the RetraxPRO XR Hard Tonneau Cover # RTT-80485: Roof Rack Parts - Yakima BaseLine FX # Y83TR - BaseClip Fit Kit # Y06124 Ladder Rack Parts - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y47TR - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y67TR - Tonneau Cover Adapter Kit...
  view full answer...
• Can Old Yakima Round Crossbars And Q Towers Be Used With New System On 2024 GMC Sierra 2500HD?
  Hey there Bill, I got good news and some bad news. The good news is that we can piece together a kit and you can re-use your old Yakima crossbars since they are the same diameter as the new ones. The bad news is that you are correct in saying the Q towers won't work with your new vehicle so you'll need the new ones. The complete kit for your 2024 GMC Sierra 2500HD with naked roof is as follows, and remember you already have the crossbars so you technically do not need to buy more: -Yakima...
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Silverado 2500
  To add a set of crossbars to the roof of your 2024 Chevy Silverado 2500, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. It fits both the crew cab and double...
  view full answer...
• Are Yakima Same Key System Keys Unique
  The keys that come with the Yakima Same Key System (SKS) Lock Cores # Y07204 are not universal and will help prevent theft. On our site alone we have over 50 unique keys for replacement options so it isn't like there are 2-3 different possible keys someone could use to get the rack off. If you're planning to add the # Y00426 to your 2022 Ford Ranger you will also need the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06124. You will be able to add the SKS Lock Cores # Y07204 to...
  view full answer...
• What Are the Dimensions of the Yakima BaseLine Towers With the Crossbars and BaseClip
  Kason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8".
  view full answer...
• Roof Rack Recommendation for 2024 Chevy Silverado 3500HD to Carry Yakima Showdown
  Hey Ross so I would recommend going with a Yakima JetStream roof rack for your 2024 Chevy Silverado 3500HD that consists of part numbers # Y00426, # Y28TR, # Y27FR, # Y06124 as we have found the Jetstream racks are the nicest and easiest to use. And we also know the Yakima Showdown part # Y04081 was tested with this rack and works great as well.
  view full answer...
• Roof Rack For 2020 Ford Ranger to Install Yakima LockNLoad Platform
  We can get you set up with everything you need for your 2020 Ford Ranger so you can use the Yakima LockNLoad Platform Rack for Crossbars # Y05044-39. I checked with Yakima for you, and this the 55" long x 49" wide LockNLoad, which is the correct size for your truck. To mount it, all you will need is a Yakima roof rack, and you won't have to do any type of drilling as the LockNLoad will fit directly on the roof rack's crossbars. The correct roof rack for your 2020 Ranger is made up of the...
  view full answer...
• How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel Towing
  Generally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
  view full answer...
• Best Roof Rack and Four Fishing Rod Holder for a 2019 Ford Ranger
  The roof rack I recommend for a 2019 Ford Ranger is the Yakima JetStream Crossbar System which consists of part # Y00425, part # Y28TR, and part # Y06124. The Yakima JetStream Crossbar System is one of the best options on the market which has aero shaped crossbars which work to reduce wind noise/drag and rubber padded feet to protect the vehicle's finish. The fishing rod carrier I recommend for the 2019 Ford Ranger with Yakima JetStream Crossbar System is the Yakima ReelDeal Rooftop Fishing...
  view full answer...
• Roof Rack Recommendation with Longer Crossbars for 2020 Chevy Silverado 3500 Long Bed
  Yakima has roof racks that do fit your 2020 Chevy Silverado 3500 Crew Cab like the HD bar rack part numbers # Y01157, # Y28TR, # Y03541, # Y27FR, and # Y06124 which gives you a 60 inch bar setup with plenty of weight capacity. This would be best way to carry the accessories you have now as the ladder racks have wider bars than what standard roof rack accessories can fit. Then for a fold up tonneau cover the BAKFlip F1 part # BAK37FR would be a really great option as well that is confirmed...
  view full answer...
• Recommended Roof Rack for a 2024 Volvo S90 w/ No Rails
  To add a roof rack to your 2024 Volvo S90, that does not overhang the side of your roof, you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y59UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500
  For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
  view full answer...
• Recommended Roof Rack for a 2020 Chevrolet Silverado 3500
  The roof rack I recommend for a 2020 Chevrolet Silverado 3500 is the Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, part # Y06124, and part # Y27FR. This is an excellent option and will work well with the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 so long as you alternate their direction. The system is a custom fit so it will look nice on the roof of a new vehicle and it has aero crossbars for the best wind resistance.
  view full answer...
• Roof Rack Recommendation for 2023 Ford Ranger with Naked Roof
  I attached a link to a page that has all of the roof racks that fit your 2023 Ford Ranger with a naked roof like the Yakima JetStream rack part # Y00428, # Y28TR, # Y06124. When we had the chance to test fit all of the roof racks we carry we all agreed that the Yakima Jetstream was the nicest so you'd be very happy with this option.
  view full answer...
• What is the Most Economical Roof Rack for My 2021 Ford Ranger with a Bare Roof?
  The most economical rack that doesn't require drilling for your 2021 Ford Ranger with a bare roof requires the following parts: - Round 48" CrossBars for Yakima Roof Rack System (QTY 2) # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06124 - (Optional for extra security) Yakima Same-Key Lock...
  view full answer...
• Parts Needed for Removing Lock Cores for Yakima Same Key System SKS Baseline Towers
  You're looking for the Replacement Control Key for Yakima Same Key System # Y8007835, which will allow you to move lock cores from your existing Yakima towers to your new Baseline towers. This disengages the splines on the lock cores to allow them to be removed from towers, bike racks or cargo boxes equipped with Yakima SKS locks. It looks like you've got a 2019 Ford Ranger so the complete Yakima roof rack kit for your vehicle that uses the Yakima 48" Roundbars # Y00408 you were looking...
  view full answer...
• RetraxONE XR Compatible Ladder Rack and Roof Rack Accessory Recommended for 2020 Ford Ranger
  The # RTT-60335 RetraxONE XR hard tonneau cover you'd looked at would be a great choice for your 2019 Ford Ranger. For a ladder rack, I'd recommend the Yakima OverHaul HD, part # Y01151-58. You'll also need the adapter mount, part # Y01155 which allows the ladder rack to mount to the rails incorporated into the RetraxONE XR tonneau cover. Yakima tells me that the 68 inch crossbars included with this ladder rack are what's recommended for the Ranger pickup, and would be compatible with the...
  view full answer...
• Largest Rhino-Rack Pioneer Platform For Crossbars on 2020 Ford Ranger
  Yep, the largest Rhino-Rack Pioneer for crossbars that will fit your 2020 Ford Ranger is indeed the 58" x 47" option: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars # RR42115BF The Pioneer is a really nice system which allows you to carry a lot of gear in a number of different ways; to tie down that gear you can use the Ratchet Strap Kit # RR43175 and/or the Eye Bolt Kit # RR43178. If you also need a roof rack on your '20 Ranger for the Pioneer, go with the Yakima which consists...
  view full answer...
• Which Yakima BaseClip is Front and Which is Back for the 2014 Chevy Impala
  The Yakima JetStream roof rack that fits your 2014 Chevy Impala includes the following parts: 50" Yakima JetStream Crossbars - # Y00428 BaseLine Towers - # Y28TR Front BaseClip - # Y06124 Rear BaseClip - # Y06126 Lock Cores - # Y07204 (optional) I listed which clip should be in which position above but if I hadn't told you this, you can find these fitments in the instructions or on the Yakima website. Attached are some videos for you to check out!
  view full answer...
• Parts Needed to Install Yakima Roundbar Roof Rack 2021 Ford Ranger
  To install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers # Y28TR, # Y03536, # Y06124 since you already have the crossbars. Normally you'd additionally need the part # Y00408.
  view full answer...

Do you have a question about this Roof Rack?