Heavy-duty plastic vent attaches to outside wall of RV or enclosed trailer to keep water out of range hood exhaust outlet. Canopy blocks out water. Damper can be locked closed. Collar extends 1-3/4" into wall. Hardware sold separately.
Features:
Specs:
Installation Instructions
Average Customer Rating: 4.5 out of 5 stars (152 Customer Reviews)
Heavy-duty plastic vent attaches to outside wall of RV or enclosed trailer to keep water out of range hood exhaust outlet. Canopy blocks out water. Damper can be locked closed. Collar extends 1-3/4" into wall. Hardware sold separately.The damper fell out of my old original range hood vent. It lasted 16 years so I can,t complain. I ordered a new vent from etrailer and it works very well. The price was more than fair also. Thank you all for providing excellent options for products and lots of info to go with them.
Fast shipping and easy install… would be better if it came with stainless steel screws and butyl tape!
Feels kinda cheap, but it works fine, and the price was right. I Installed it in the sidewall of my cargo van conversion, and use it with a couple of computer fans for my main ventilation system. A very inexpensive solution to the problem of condensation buildup.
Sturdy hood vent. I needed to trim 1/2 inch off the collar as my wall was a little thinner than I figured. It cut easily with a cut off blade in my grinder, which is what I used to cut the hole in the wall outside then inside after drilling the four corners through from the inside.
Basic vent that fit fine to replace my factory cracked one. If you are looking for a more elegant looking vent, this is probably not the one for you. But a basic vent is all I was looking for.
Unit was not as sturdy as I expected, but it works. I added a vented hood to our RV so I cut the hole in the side and sealed the vent with putty and screws. Screws and putty were not supplied with the vent. You need to purchase those seperatly.
Replacing an old one on my horse trailer & this one fit perfectly!
Direct replacement for a 6-year old exterior wall range hood vent on my 2014 Grand Design RV. Simple installation, just 10 screws and re-caulking to keep the water out. Great price and fast shipping from etrailer.com !
After accidentally leaving the damper flap unlocked for the drive home, it mysteriously decided not to return home with us. It flew away mid travel I have to assume. Etrailer.com had exactly what I needed to return to stove top vent flap happiness. Highly recommended as etrailer.com stocks exactly what you need for your R.V.
Good quality and it's held up to the Arizona summer, which is saying a lot.
Exact replacement part. In process of changing all the white colored ports and vents. Those dingy white ports and vents look bad. They should have been black all along.
It also gives my 2005 toy hauler a newer model look. Very pleased with parts from etrailer.
Thanks for carrying my brand parts.
Product that I ordered was a little different than expected but I made it work for the replacement that I needed
Good price, fast shipping.
Looks and holds up well. Great product for the money. The thumb tab to latch the vent closed is easy to operate.
It's a great fit with a Graystone hood.
Perfect fit, quick delivery, looks like the original. Very pleased.
worked good for my application.
Great service, delivered on time. Exact replacement for the factory installed -- works like a charm.
The plastic is way too thin. While backing into a site I scraped a branch of a tree and ripped it off the side of our rig. It was the only thing damaged.
I got what I wanted at a fair price with reasonable freight and excellent packing albeit with a glitch. This item was scratched and scuffed. I contacted etrailer and they took care of it right away. This is not a surprise as I have been dealing with them for over nine years and will continue to do so. It's a pleasure to deal online with a company with C/S that is OTT.
not quite as large as the one i removed from my 2019 grand design trailer will function properly. i like the latches that hold it closed
I purchased a "Ventline Exterior vent for Range Hood" to install in the upper panel of my tall Promaster's rear doors. My intent was to use the vent to aid in air circulation. The vent is covered on the exterior with an angled eave to keep rain out, and there is a flue inside the vent to seal out any air entering from the outside. In theory It would meet my design needs. However, the quality of the vent was dismal. I have tissue boxes that are better made: There was untrimmed flashing on most of the vent's edges; The "eave" is 1/16" thick and the interior rectangular conduit is even thinner (almost paper thin). The flue mechanism can only be locked shut from the outside. I was hoping this could be done from the inside of my vehicle. The description of the vent on the web-site did not specify (that I recall) where the latches were located. They are very flimsy in any event an I suspect easily broken. If I had a dog I would put it on his house, but I am not going to cut holes in my van for this marginal product. etrailer delivered the product quickly and it was packed well enough to survive its box being crushed enroute. My search for a useful quality vent will continue.
etrailer was excellent, easy ordering, very quick and safe delivery of this vent. Product quality was less than expected. Installation was very easy.
Need a way to keep the damper closed in winds. Bangs and lets dust into fan.
Put doubled sided tape when not in use.
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.