See what our Experts say about this Yakima Roof Rack

• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• What Length/Type Of Crossbar For Mounting Two Hullavators On 2025 Subaru Outback Wilderness?
  Hey Carol, I can definitely help with that! You will need to go with an extra long crossbar to accommodate two of the Thule Hullavators # TH898 on your 2025 Subaru Outback Wilderness, but it can be done. The best roof rack for this will be a Yakima JetStream rack since the design of their crossbars allows longer bars to work. Each Hullavator requires 28-1/2" of bar space so a 60" crossbar will do great. Here are the parts you need: - TimberLine Towers for Yakima Crossbars - Raised, Factory...
  view full answer...
• Can I Put A 60" Long Crossbar On A 2022 Subaru Outback
  Hello Joe, thanks for reaching out. Yes, it is possible to put a 60" (or longer) crossbar on your 2022 Subaru Outback. I will need to verify a bit more vehicle information before I can recommend the correct parts. Does your outback happen to be the Wilderness edition? Let me know. Also please verify that your Outback has the factory installed raised rails running from front to back. Let me know and I will be able to narrow down the right roof rack. For example, if you do have the Wilderness...
  view full answer...
• What End Caps do I Need for My Yakima CoreBar Crossbars?
  Hello Tony, You will want the Replacement Endcaps for Yakima CoreBar Crossbars - Qty 2 # 8880640 for your Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422. What do you mainly use your roof rack for?
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Can Old Thule Hullavator 897XT Fit Yakima CoreBar Crossbars
  Hi Rex; I'm sorry to say there are no adapters that will allow you to install the old Hullavator onto Yakima CoreBar Crossbars like # Y00422. You can swap them out for JetStream bars and see if Thule can send you the adapter for the top channels but I would make sure they still have it available before trading out the crossbars. The other option is to sell your existing Hullavator and pick up the Thule Hullavator Pro # TH898 which clamps on so it will work with the CoreBars. What kind...
  view full answer...
• Recommended Way to Carry a Kayak for a Ford F-150
  As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
  view full answer...
• How to Carry a Kayak and a Canoe on a 2014 Subaru Outback Wagon
  I do have an option for you but we don't really have any feasible solutions for you to carry both a kayak and canoe on the roof of your 2014 Subaru Outback Wagon at the same time. Instead, I recommend placing both the kayak and canoe on a pull behind trailer like the Malone EcoLight Trailer part # MAL. In order to pull a trailer with your vehicle you will need a trailer hitch, wiring harness, and ball mount/hitch ball. For this I recommend using the Draw-Tite Trailer Hitch part # 75673,...
  view full answer...
• Roof Rack for 2000 Chevrolet Astro Van With Naked Roof
  Hi Alex; for your 2000 Chevy Astro I recommend the Yakima 54" Tracks for Roof Racks # Y01127. This uses PlusNuts for installation which will not require removing the headliner. For the complete roof rack you will also need two sets of Landing Pad 1 # Y00221, SkyLine Towers for Yakima Crossbars # Y53TR, and crossbars like the Yakima CoreBar Crossbars - 60" Long # Y00422. Based on other roof racks for the Astro with raised rails 60" will be an appropriate length for crossbars.
  view full answer...
• Correct Yakima Towers for a 2023 Toyota Sequoia
  The towers compatible with your 2023 Toyota Sequoia is going to be those TimberLine Towers for Yakima Crossbars # Y33TR. These towers will work with Yakima's JetStream # Y00426, HD # Y01157, CoreBar # Y00422, and RoundBars # Y00409.
  view full answer...
• Will the Malone AirFlow 2 Work for My Roofnest Falcon XL Tent on My 2011 Chevy Suburban?
  The Malone AirFlow2 # MPG217 will work with your Roofnest Falcon XL on your 2011 Chevy Suburban only if your total weight is less than 165 pounds. Also, as far as fitting the crossbars of the AirFlow2, your tent will fit as long as the clamps/mounting hardware can fit a crossbar with measurements of 3 inches wide x 1 inch tall. I recommend measuring the maximum dimensions of the clamps/mounting hardware of your Roofnest Falcon XL. If you need an option with a higher weight capacity for...
  view full answer...
• Is Thule Hullavator Kayak Carrier Compatible with Yakima CoreBar Crossbars
  The Thule Hullavator Pro Kayak Carrier # TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit # TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work correctly and avoid contacting your vehicle. I have attached a photo showing how to make sure your CoreBar is long enough. If you happen to need longer CoreBar crossbars we have them available here: 50" - # Y00421 60" - # Y00422 70" - # Y00423 80" - # Y00424
  view full answer...
  
• Bar Length for Carrying two Yakima ShowDown Kayak Carriers
  Since the Yakima Showdown part # Y04081 hangs over the crossbars quite a bit when installed and they are 42 inches long the best bar length for two of them would be 60 inch like you mentioned. So for that you'd want the # Y00426 if you had the Jetstream bar setup or the # Y00422 for the CoreBar since these are the only two bar styles from Yakima that are available in 50 inch and 60 inch.
  view full answer...
• Will the Thule Hullavator Fit on a Yakima Roof Rack?
  As far as the Thule Hullavator # TH898, it will attach to most styles of Yakima crossbars (for example, the JetStream crossbars # Y00425, the Round Bars # Y00409, and the CoreBars # Y00422). However, you need additional components to mount Yakima crossbars to your roof. In order to give you a complete system, please respond to this answer with the year/make/model of your vehicle. Also, something else needs to be considered. In order for the Hullavator to function, there needs to be at...
  view full answer...
  
• Adapter For Yakima ButtDown 6 Ski Rack to Mount to Aero Bars
  There is a way for you to mount your Yakima ButtonDown 6 ski rack to aero bars like the Yakima CoreBar Crossbars # Y00422. Yakima has confirmed for us that in order to do this, what you will need are the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590. I have added a link below to the instructions and a video review for you to check out as well.
  view full answer...
• What Kayak Load Assist Can I Use With My Lockrack For My 2016 Subaru WRX
  I do have a solution for you, but will not involve the Lockrack Loading Bar. You will still have to remove, or adjust the orientation, of the arms for this solution to work, but this method would be your only option. You can use the following items to help you load your kayak with the Lockrack Loading Bar. The Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 lbs, part # RR-RUSL. This load assist bar clamps to your roof top rack and it has a weight limit of 132 lbs....
  view full answer...
  
• Can the Yakima 60 Track System Be Installed On Naked Roof Vehicles?
  You can use either the Yakima 54" tracks # Y01127 or 60" tracks # Y01135 on naked roofs without needing to remove the headliner, and as long as you're careful, you won't damage the headliner during installation. It should be noted that the 60" tracks are usually too long for most vehicles with naked roofs, which is why the title is so vague. The Yakima 54" kit comes with the PlusNut Hardware but to install the 60" tracks on a naked roof you would need to purchase a PlusNut Hardware kit...
  view full answer...
• Temporary Roof Rack Solution Using Tracks on Bed Rails of 2012 Honda Ridgeline with OEM Tonneau
  There isn't a roof rack option specifically designed to mount on top of your bed rails and work together with the OEM tonneau cover on your 2012 Honda Ridgeline, so the closest option I have for you is going to be a Yakima Custom Install Roof Rack. To accomplish this, you'll need a set of SkyLine Towers (qty 4) # Y53TR, a pair of CoreBar Crossbars # Y00422, four total landing pads # Y00221 (sold in pairs), and 54 inch Tracks # Y01127. The Yakima Tracks, # Y01127, are designed for sheet...
  view full answer...
  
• What Yakima Roof Rack Will Fit My 2018 Toyota 4Runner With Fixed Points
  After reading your question, it appears that you would like your front crossbar to be further forward on the roof of your vehicle. The Yakima system you are referencing, the old Q-tower system or its replacement the BaseLine system, are for naked roof applications. That does not apply to your vehicle. Your 2018 Toyota 4Runner has raised rails with fixed points, so a rack that attaches to the frame of your vehicle will not work. Your roof rack will attach via the Yakima Landing Pads which...
  view full answer...
  
• Do Yakima CoreBar Crossbars Work With Roof Top Tents On Jeep Cherokee
  Yes, RTT's such as the Yakima SkyRise, # Y07437 work with the Yakima CoreBar Crossbars, # Y00422. Please note the linked product review and installation videos below.
  view full answer...
• Yakima Towers Needed to Mount to Landing Pad 1 on Track System
  It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
  view full answer...
  
• Parts Needed To Install Yakima Round Bars On A Honda Element
  We do carry the additional parts needed to mount Yakima Round bars on the top of your Honda Element. Fortunately both the 2007 and 2010 models use the same parts. You will need the following parts; Skyline Towers # Y53TR Roundbar Adapter # Y03536 Landing pad # Y00229 (you will need to order qty 2 of these for 2 crossbars) Please note that with the fixed mounting points on your Honda Element, you are limited to only 2 crossbars on each vehicle. I am not sure but it sounds like you are...
  view full answer...
• How to Install Yakima Skyline Tower Setup on Camper
  The only way to install a Yakima Skyline tower setup on a camper like what you have will require installing a set of tracks on the roof first like with the part # Y01135. If you have the clearance for the 60 inch long tracks, then the Yakima tracks will mount to your camper. You will need to use the SkyLine Towers, # Y00148, to attach any of the Yakima crossbars to the track system. Also, the Yakima Landing Pad 1, # Y00221, is needed to attach the SkyLine towers to the track rack. The...
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Roof Rack For A 2023 Toyota 4Runner And A Yakima SkyBox
  We can definitely help set you up with a Yakima SkyBox NX 16 # Y95AV for the top of your 2023 Toyota 4Runner with the factory raised rails. All you will need to do is install a roof rack with crossbars. Since you are doing a Yakima brand roof box, it is best to go with a Yakima brand roof rack as well, since everything will be directly compatible. The Yakima JetStream crossbars will be a great fit for your vehicle. The complete roof rack consists of the following parts: Yakima JetStream...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
  Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
  view full answer...
• Can I Put A 60" Long Crossbar On A 2022 Subaru Outback
  Hello Joe, thanks for reaching out. Yes, it is possible to put a 60" (or longer) crossbar on your 2022 Subaru Outback. I will need to verify a bit more vehicle information before I can recommend the correct parts. Does your outback happen to be the Wilderness edition? Let me know. Also please verify that your Outback has the factory installed raised rails running from front to back. Let me know and I will be able to narrow down the right roof rack. For example, if you do have the Wilderness...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
  I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
  view full answer...
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• What do I need to setup a Thule Hullavator on Yakima JetStream Crossbars on a 26 Toyota Highlander?
  Great choice Peter, that combo works very well together! Since you already have 60" Yakima JetStream crossbars # Y00428 and a Thule Hullavator # TH898 , you’re most of the way there. The key now is just getting the correct tower and fit kit for your 2026 Highlander roof type. If the Highlander has "Flush Rails" this is the correct fit kit # Y53TR Yakima SkyLine Roof Rack Towers for JetStream Crossbars - Qty 4 # Y66VR Yakima Landing Pad 28 If the Highlander has "No Rails" this is the...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Can I Use the Same Yakima Landing Pad on my 2025 Subaru Outback That I Used on My 2019
  That's a great question, Maryann! No, you can't use your existing Yakima Landing Pad 15 # Y00241 on your 2025 Subaru Outback Wagon. Instead, you would need to get the Yakima Landing Pad 27 # Y46VR. You will still be able to use your SkyLine Towers # Y53TR and just swap them out for the Landing Pad 27. Congrats on the new Subaru! What are you usually carrying on the roof?
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
  I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
  view full answer...
• Yakima Landing Pads for 2025 Jeep Grand Cherokee L Flush Roof Rails
  Hey Bruce, thanks for reaching out! The Landing Pad 19 # Y00245 is what fits your 2025 Jeep Grand Cherokee L with the flush mount rails. This fits with the SkyLine towers in a full roof rack kit like part # Y77TB. Do you already have some roof rack parts?
  view full answer...
• Kayak Carriers, Ski Racks, and Bike Racks for 2024 Jeep Grand Cherokee Laredo
  I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Kuat Switch 4 Ski and Snowboard Carrier # KU94FR. This is capable of holding 4 pairs of skis, has an aluminum construction for corrosion resistance, and comes with locks to keep your skis secure. Three kayaks will be a bit more challenging. Since space will be limited even with an aftermarket roof rack I recommend using the Malone FoldAway-5 # MAL38FR along with a J-style...
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Roof Rack and Rear Loading Kayak Carrier Recommendation for a 2021 Honda CR-V
  For your application I recommend going with a Yakima setup, both for the roof rack and for the kayak carrier. To install a Yakima roof rack on your 2021 Honda CR-V you need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) The Rhino-Rack Nautic 581 Rear Loading Kayak Carrier # RR581 will fit the channels of the Yakima system just fine and it's a good rear-loading kayak carrier, I just really like...
  view full answer...
• Will Yakima FlushBar Fit Landing Pad 19 On 2023 Jeep Grand Cherokee
  Hi Lauren; the Landing Pad 19 # Y00245 is only designed to work with SkyLine and Control towers. There is no way to adapt the old FlushBars to your 2023 Grand Cherokee. If you want the same style of roof rack you will need the Yakima SkyLine FX Roof Rack for Fixed Mount Points # Y88YD which comes with JetStream crossbars. What will you be using the roof rack for?
  view full answer...
• Replacement For Yakima Landing Pad 19
  Hi Thomas, Yakima doesn't have a single Landing Pad 19 they offer, just the pack of four with the Landing Pad 19 # Y00245.
  view full answer...
• Roof Rack For Using Thule Hullavator On A 2023 Cadillac XT5
  Hello Darla, thanks for reaching out. I recommend using a Yakima JetStream bar roof rack on your 2023 Cadillac XT5. The Yakima Crossbars will be compatible with the Thule Hullavator # TH898, and there will be enough overhang on the crossbars to properly support the Hullavator system. The complete roof rack consists of the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails,...
  view full answer...
• What Kind of Roof Racks Are Available for 2005 Nissan Pathfinder
  Hi Rodney; assuming you have the raised side rails we have roof rack systems with aero bars and square bars. I would stick with aero personally since they're easier to deal with when mounting accessories. If you're looking for a low cost option to put on when you need it I recommend the Inno Aero Roof Rack for Raised Rails # IN53YV. If you plan on keeping the roof rack on all the time I would get the Yakima JetStream roof rack since it is the quietest. You will need the # Y00425, # Y53TR,...
  view full answer...
• Recommended Roof Rack for a 2024 Buick Enclave w/ Flush Rails
  Yes, you can! To add a roof rack to the flush mount rails on your 2024 Buick Enclave, I recommend the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y38UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity and it does not extend past your roof rails. I have attached a couple of pictures below so you can have...
  view full answer...
  
• What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?
  Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
  view full answer...
  
• Recommended Roof Rack for a 2023 Chevy Bolt EUV w/ Side Rails
  Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach to your...
  view full answer...
  
• Recommended Roof Rack for a 2024 Jeep Grand Cherokee L w/ Flush Roof Rails
  Yes, there is. To attach a Yakima roof rack to the flush rails on your 2024 Jeep Grand Cherokee L you will need the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y58UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity and will not go past your roof rails. I recommend adding the Yakima Same Key System item # Y07204 to help prevent theft. A great...
  view full answer...
• How to Adapt Yakima Round Crossbars for Thule Hullavator on 2022 Honda CR-V with Flush Rails
  From the looks of your included picture, it looks like you have flush factory rails and Yakima Round crossbars for your 2022 Honda CR-V. In order to use your Yakima RoundBars, you need to first remove the factory crossbars you currently have installed on your CR-V. Then, once those are removed, you can access the fixed mounting points on your vehicle. Additionally, you will need these parts to install the bars if you do not have them already: - SkyLine Towers # Y53TR - Landing Pad 19...
  view full answer...
  
• Recommended Roof Rack for a 2024 Chevrolet Trailblazer w/ Flush Roof Rails
  I would be happy to! To add a roof rack to your 2024 Chevy Trailblazer with flush roof rails you will need the following parts: Yakima SkyLine FX Roof Rack - JetStream Aero Crossbars - Black - Qty 2 item # Y66UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity. The crossbars do not extend past the mounting legs. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of...
  view full answer...
• Recommended Crossbars for a 2024 Chevrolet Trailblazer With OEM Rails
  Yes it does make a bit of a difference but in either case we have you covered. I recommend checking out the Yakima SkyLine FX Roof Rack for Fixed Mounting Points # Y66UV with the Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245. These crossbars install easily by clamping onto your existing roof rails, measure 37-1/2" long x 5" wide x 3-1/2" tall, and has a dynamic weight capacity of 165 lbs.
  view full answer...
• Roof Rack For 2024 Chevy Blazer EV With Flush-Mount Rails
  Hi Chris; we do in fact have a roof rack fit for your 2024 Chevy Blazer EV, so long as your Blazer has flush-mounted rails to attach the feet to. The rack is from Yakima, and I verified this fit directly with them for you. The parts that make up the rack for your Blazer are the following: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245 This is an exceptionally...
  view full answer...
• Recommended Roof Rack for a 2023 Chevrolet Bolt EUV w/ Flush Mounted Rails
  Congrats on your new purchase. To add a set of crossbars that don't extend past the rails on your 2023 Chevrolet Bolt EUV's roof, I recommend the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y55UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity. I also recommend adding the Yakima Same Key System item...
  view full answer...
• Recommended Roof Rack for a 2024 Cadillac XT4 w/ Flush Rails
  Congrats on the new vehicle! To add a Yakima roof rack to your 2024 Cadillac XT4 with flush rails you will need the following parts: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 item # Y00421 or item # Y00428 for silver crossbars SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 I recommend adding the Yakima Same Key System item # Y07204 to help prevent...
  view full answer...
• Recommended Roof Rack for 2021 Honda Pilot to Use Thule Force XT Cargo Box
  Which roof rack components you'll need will depend on whether or not your 2021 Honda Pilot has the flush mounted rails or a completely naked roof. If your Pilot has flush mounted rails that run front to back on the roof then you'll want to use the Yakima Roof Rack kit for 2021 Honda Pilot that uses parts # Y00421, # Y53TR and # Y00245. This system comes with aerodynamic crossbars that will help reduce the wind noise associated with roof racks. The Yakima Skyline towers # Y00148 can have...
  view full answer...
• Recommended Parts to Add Crossbars to the Roof Rails on a 2024 Jeep Grand Cherokee 4XE
  Yes, I can. To add a set of crossbars to your 2024 Jeep Grand Cherokee 4XE you will need the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y58UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack attaches directly to your raised rails and has a 165 lbs capacity.
  view full answer...
• Roof Rack for 2017 Ford Explorer Compatible With Thule Hullavator Pro
  There is a roof rack for your 2017 Ford Explorer that is compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898, although the 53 inch bars of the Rhino-Rack system are not going to be quite long enough to work. Due to that, in order to get long enough bars you will need to go with the Yakima roof rack. The reason is due to how crossbars mount; they foot pack that attaches to the bars slides into a channel underneath the crossbars. That channel on the Rhino-Rack...
  view full answer...
  
• Roof Rack For 2023 Cadillac XT4
  By cross rails I believe you are referring to a roof rack, and we do have a fit for a roof rack on your 2023 Cadillac XT4, from Yakima. The rack consists of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 # Y00245 This rack will not only fit your '23 XT4, it will provide it with a quietest, durable, easy-to-use roof rack that also looks great. The rack is quiet because it has "WindRidges"...
  view full answer...

Do you have a question about this Roof Rack?