Product Experts Available Now!
Call 1-800-940-8924
Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" - Qty 1
(366 reviews)
Price: $117.19
In Stock
etrailer
Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" - Qty 1
Part Number: HP96VR
In Stock
$117.19
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (366)
- Q & A (0)
- Photos
- Used (1)
etrailer Trailer Fenders - HP96VR
- 13 Inch Wheels
- 14 Inch Wheels
- 15 Inch Wheels
- For Single-Axle Trailers
- Aluminum
- 33 Inch Long
- 10 Inch Wide
- Bolt-On
- Weld-On
- Diamond Plate
- No Step
- etrailer
10" Wide x 33" long x 17" tall. Excellent for boat trailers, this diamond plate aluminum, PVC-coated, Jeep-style trailer fender can stand up to rust, corrosion, and scratches while you're on the road. Easily bolt onto your trailer.
Features:
- Jeep-style fender covers 1 tire on your single-axle trailer
- Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
- Classic Jeep design with diamond tread offers a rugged look for your trailer
- Rustproof, corrosion-resistant aluminum construction
- 16-Gauge aluminum diamond plate is stylish and rugged
- PVC coating protects from scratches and scuffs
- Bolt-on installation - drilling and purchase of mounting brackets (sold separately) required
- Made in the USA
Specs:
- Application: single-axle trailers with 13" to 15" diameter wheels
- Dimensions: 33" long x 10" wide x 17" tall
- Quantity: 1 fender
- Weight: 4 lbs
- 1-Year limited warranty
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fender to your old one.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For a bolt-on fender, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
- Before you start drilling, position the fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.
Rustproof Aluminum Construction
Aluminum offers excellent, long-term defense against rust and corrosion. It is naturally rustproof, unlike steel, which must be treated with a rust-resistant coating that can break down over time. Aluminum is lightweight yet durable, making it suitable for heavy-duty, outdoor, and saltwater applications.
MFJ00007 Single Axle Jeep-Style Trailer Fender - Aluminum Tread Plate - 13" to 15" Wheels - Quantity 1
Replaces J101733AT
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Arrived Damaged
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.8
366 reviews
by:
Scott
10/26/2026
Even though it did not fit my trailer it was exactly as described. The only drawback I saw was the bubble wrap used to ship it, it did not provide very good protection for the item while in transit. Suggest using the bubble wrap AND a cardboard box of some kind.
by:
Matt
06/01/2025
Absolutely great product. Out trailer had rounded fenders, we like these a lot better! They are very strong and sturdy.
by:
Jesse
09/01/2026
A little different but close enuff. She has already mashed one in the back
by:
William
07/18/2022
I would give you guys a 5 excellent prompt service and shipping
by:
Carole
08/09/2018
Great product! Arrived quickly and was a perfect replacement for the worn out fenders on our 21 year old trailer.
by:
Terry S.
07/09/2021
Tire blew on Interstate, took original fender with it. Original was 9" deep, all I could find for replacement were 10" deep, so I replaced both. Install was easy, measure twice, screw once!
by:
Don S.
08/12/2013
I ordered these fenders even though they said "weld on" application. I screwed these on to my trailer with 1/4" self tapping screws and then applied a bead of clear silicone to the lip against the trailer. They word perfectly, were very solid and I am extremely please with my purchase. I would highly recommend these to anyone replacing existing fenders.
Don S.
2/10/2015
Approximately 6 months after I installed the fenders I started to notice small cracks at the bend seam of one of the fenders. A few months later the other side started to develop the same cracks. It seems the cracks are a result of the wind pressure hitting the front surface of the fender while traveling. Looking in my mirrors while driving the fenders are shaking back and forth in the wind and after a while the cracks start developing. The solution to this problem would be for the manufacture to increase the thickness of the fender for more stability. If they were a bit thicker they might not have cracked. I am going to take the trailer to a welding ship and see how much it would cost to weld a flat piece of bar srock to the underside of the fender along the bend for additional support. Also the cracks can be welded as well but without the extra bars for support they would probably just crack again.
by:
Ralph
02/06/2013
I have shopped at etrailer before and have found them to aways have what I needed at a fair price. This time was no exception! Did I say their shipping was fast also? I am a lifetime member and will always go to etrailer for my parts and supplies.
Ralph
2/12/2014
Fender installed easily and is still providing excellent service. Thanks for the wide range of accessories. I will continue to shop etrailer.com.
by:
Keith D.
01/07/2015
The trailer finders that I received from etrailer.com we just what I was wanting. they will do just what I want them to. Good quality for the price. I will be buying more from etrailer.com now that I have found them.
Keith D.
1/7/2016
They are just what I needed, they are doing great and if I need more trailer parts you know where I will order then from.
by:
Dave
12/01/2014
Exactly what I was looking for, simple fix and a major improvment, with a small investment.
by:
GaFlyr
09/25/2014
Great quality! Easy install. Video guidance help me obtain a secure installation. Improved the looks of my enclosed trailer.
Quick shipping helped me get back on the road in a hurry.
Thanks to etrailer.com for your excellent service, I was quite impressed with you. I will be back for more products as the need arises.
Quick shipping helped me get back on the road in a hurry.
Thanks to etrailer.com for your excellent service, I was quite impressed with you. I will be back for more products as the need arises.
by:
Dave in Pittsburgh
11/01/2014
The product description said wield on and someone asked about bolting them, the product rep said they were for wield on application and would require a support be wielded to the fender. That all being said I'm Irish / hard headed and have tools. I cut off my rusted steel steel fenders, fit cut and bent the fenders. Then using fender washers, 1/4 - 20 bolts, and clear calk I bolted the fender onto the side of my trailer. I did have the benefit of having a 1 1/2 angle at the front and back of the previous fender installation which I incorporated into this installation. Although I would have preferred a thicker gauge metal I feel I can stand on top of the fender without damaging or taring the fender from the trailer. I finished the job with another bead of calk at joint and I'm very pleased with the final outcome.
by:
Kevin
06/18/2025
Great fit better material then what was on trailer from the factory
by:
James
06/07/2022
I installed them today and they look great! Prompt delivery. I am happy!
by:
Fenders
06/09/2017
Used these fenders on a rat rod build. They look great, price is good and product was received quickly. I will use etrailer again.
Fenders
6/9/2018
Great
by:
Kirk L.
08/09/2017
This trailer fender was just what I was needing. after a blow out, the old fender was ruined. We compared,and found this one. It fit perfectly, and is still holding up very well. I would buy here again in the future.
Kirk L.
8/9/2018
Very well! Very happy with it.
by:
George W.
05/22/2017
I'm refurbishing an enclosed trailer and etrailer made it super easy. I ordered new fenders, marker lights and replacement ramp hinges. I couldn't be more happy with the quality of the parts, the customer service and the great prices. I almost forgot the free shipping promo! I have seven trailers and etrailer will be my "go to" place for parts and accessories!
by:
Larry scott
12/23/2023
This is my second one,the first one look so good I bought another one.
by:
Antny
01/08/2022
Great product, put fenders on a cargo trailer, worked perfectly, added a professional look, high quality material, easy installation, I recommend highly
by:
James
09/19/2021
I bought this to replace a fender on my box trailer that was T-boned by a truck. It was the only one I could find close to the right dimensions, and it was less expensive besides. Great communication with etrailer, and fast delivery too!
by:
BIG AL
12/08/2014
Much nicer than I expected, shipping was super fast, nearly overnight! Have not installed them yet, but I'm sure they will add a nice touch to my brand new trailer that arrived with damaged fender...upgraded to the diamond plate, glad I did. I have purchased from e-trailer before and will continue to do so...HIGHLY RECOMMENDED!
by:
Sam From KC
10/03/2013
The fenders I ordered are very nice, but a bit lighter weight than the ones I'm replacing. I received these very quickly, about 2.5 days after I placed the order! I will have to make some modifications on the trailer fender brackets to install these new fenders. They almost look to good to put on an old trailer, but they will look great! Thanks for your great service!
by:
Michael
05/16/2022
Aluminum diamond plate fenders were an excellent replacement for my trailer. Delivery was on time and quality was excellent
by:
Wayne
07/18/2017
looks great and fits perfect to my trailer, measurements given were exact. Fast and easy service and delivery.
Wayne
7/26/2018
Fender is great no issues after one year and it is still shiny!
25
366
true
Show More Reviews
See what our Experts say about this etrailer Trailer Fenders
- What Sealant Should I Use Between an Aluminum Jeep-Style Fender and My Trailer?Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" # HP96VR is exactly the route I would go. It stays flexible, creates an excellent weatherproof gasket, and does a great job of keeping water from working its way between the fender and the trailer body. I recommend the LaSalle Bristol Butyl Tape for XTRM RV Roof Membranes - 30' x 3/4" - Gray # 344270341410-1. The 3/4" width...
view full answer... - What Fender Do I Need for a Utility Trailer w/ 205/75 D15 Tires? Hey Nick, thanks for the information! For 205/75d15 tires you'll need a fender designed for 15" wheels that's at least 27-1/2" wide if the fender is going to sit near the widest part of the diameter of your tires. The Single Axle Jeep Style Trailer Fender item # HP76VR or item # HP96VR in diamond plate are going to be the best options. The item # HP76VR measures 36" long x 10" wide x 19-1/4" tall and the item # HP96VR measures 33" long x 10" wide x 17" tall. These can be welded or bolted...
view full answer... - Availability of 33x10x18 Diamond Plate Trailer FenderHi Shar; we don't have an exact match but we do have some fenders that are close. Two are the Jeep style and the other two are the standard round style fender. You can choose from the following: -Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" - Qty 1 # HP96VR (33" long x 10" wide x 17" tall) -Single Axle Trailer Fender - Jeep Style - Aluminum Tread Plate - 13" to 15" Wheels - Qty 1 # CE18041ATB (36" long x 10" wide x 19-1/4" tall) -etrailer Aluminum Tread-Plate...
view full answer... - Top Length of Single Axle Jeep Style Trailer FenderHi Robert; the top inside length of the Single Axle Jeep Style Trailer Fender # HP96VR is 16". The flat part on the very top is 17" long. I'm sure you already saw it on the product page but the rest of the dimensions are 33" long (at the bottom) x 10" wide x 17" tall. This is the closest match we have to the dimensions you described. Are you trying to match this up with an existing fender? If this is for a custom application and you can't find it elsewhere I would see if a local fabricator...
view full answer... - Replacement Fender Options for Haulmark Single Axle FenderI do have an option for you but we only offer universal trailer fenders, nothing specific to any one trailer. The Single Axle Jeep Style Trailer Fender part # HP96VR for diamond plate or part # HP76VR are two suitable options under the jeep style category designed for 13-15" wheels.
view full answer... - Recommendations For A 10" x 32" x 17" Polished Trailer FenderThe fender we have that matches your needs the closest will be the Single Axle Jeep Style Trailer Fender # HP96VR. This has a polished diamond plate aluminum finish and measures 10" Wide, 33" long, and 17" tall, but is the boxier and squared Jeep style look. If that doesn't suit you, the only other options we have that will be similar in size will be the Ribbed Steel # HP49FR and the Cold Rolled Steel # HP29VR. Both of these will measure 10-3/4" Wide, 32" long, and 15-1/4" tall, but will...
view full answer... - Fender Compatible With 13 Inch Wheels On Shorelander Trailer Carrying 18 Foot SEA-ARC BoatI have provided a link of the fenders that will work with your existing trailer and a 13 inch tire size. Several of these fenders provide areas that are intended to mount lights but none have lights that are included with the fenders. For your trailer I recommend the Fulton Single Axle Trailer Fender with Top and Side Steps, this comes in 3 colors white # F008573, silver # F008593, and black # F008583. The dimensions of this fender are 9 inches wide by 40 inches long by 12 inches tall....
view full answer... - Mounting the Aluminum Tread Plate, Jeep-Style, Single-Axle Trailer FenderThe Aluminum Tread Plate, Jeep-Style, Single-Axle Trailer Fender, item # HP96VR is designed for a weld on application and putting screws and washers through the lip on the inside of the fender would most likely not last. If these fenders were to be installed on a steel trailer you would need to have an aluminum mounting bracket welded to the inside edge of the fenders that could be used to stiffen the fender and give additional mounting points. We do have steel fenders available that should...
view full answer... - Replacement Jeep-Style Fender for a Trailer with 15 Inch WheelsWe have several Jeep-style fenders that will fit 15 inch trailer wheels and that you can bolt on. For plain steel fender you can use # HP76VR. It can be bolted on or welded on. Holes will need to be drilled to bolt it on like your existing fenders. This fender is 10 inches wide 33 inches long and 17 inches tall. We also have # HP96VRwhich is 10 inches wide, 33 inches long, and 17 inches tall. it can be bolted on as well but would require drilling holes. And finally we have a tread plate...
view full answer...
- Recommended Replacement Fenders For A 2010 Hallmark Transport TrailerWhen it comes to replacing your fenders on your 2010 10x6 Hallmark Transport Trailer you indeed can install The Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13 inch to 15 inch - Qty 1 # HP96VR. When attaching the fenders # HP96VR to your trailer you will need The Mounting Brackets for Trailer Fender - 13 inch/14 inch/15 inch Wheels - Galvanized Steel - Qty 2 # CE26098G-2 you will not be able to attach the fenders directly to the trailer. 2 brackets are needed to mount...
view full answer... - Trailer Fender Recommendation for a Calkin Boat Trailer towing a 22 Foot TrailerThe etrailer brand Single Axle Trailer Fender # HP96VR that you referenced should work well for you since your mounting blocks for your older fenders are 32 inches apart. Another option you have would be the etrailer Single Axle Trailer Fender # HP66VR if you like round fenders. I attached an install video for you to check out also.
view full answer... - Looking for Aluminum Jeep-Style Fenders for Haulmark TrailerWe do offer Jeep-style fenders. You can see our selection by clicking the provided link. We have two different aluminum tread plate fenders, part # HP49VR, designed for 8-12 inch wheels or part # HP96VR designed for 13-15 inch wheels. We also offer steel Jeep-style fenders, # J10821 for 10 inch wheels, and # HP76VR for 13-15 inch wheels.
view full answer... - Availability of 33 Inch x 10 Inch x 18 Inch Trailer FenderThe closest trailer fender we have available to the dimensions you mentioned is a Jeep Style Fender like the etrailer brand # HP96VR. This aluminum fender is 33 inches long, 10 inches wide and 17 inches tall. It is designed to fit with 13-15 inch wheels and can be installed as a bolt-on or weld-on application. For a standard fender, the closest option we have is the etrailer Single Axle Fender # HP56VR. This is a 16-gauge steel fender that is 32 inches long, 9 inches wide, and 15 inches...
view full answer... - Trailer Fender Recommendation for a 1999 Interstate Enclosed TrailerThe Jeep-Style, Single-Axle Trailer Fender, # HP76VR, can be bolted on to a trailer but you would have to make sure it is secure to the trailer, will not rub the wheels, and is centered. The biggest issue is to make sure it is secure. It will require drilling into both the fender and the trailer as you are aware. It would be best for this fender to be welded on. With an aluminum trailer and steel fender, this will not be feasible, so it would be better to find the best match fender for...
view full answer... - Trailer Fenders Compatible with 12 Inch Wheels and Brackets 27 Inches ApartFor your retrofitted kayak trailer I recommend the Single Axle Trailer Fender - 16 Gauge Steel - 13" to 14" Wheels - Qty 1 # HP89VR which have a span of 28 inches. This fender is designed for larger tires and has a 28 inch overall span, so when mounting to your brackets it will fit on the inside of your brackets. If you want to go over the brackets then the Single Axle Trailer Fender - Jeep Style - Aluminum Tread Plate - 13" to 15" Wheels - Qty 1 # HP96VR may be more the route to go....
view full answer...
- Aluminum Fender Recommendation For TrailerWe do offer an aluminum trailer fender but it does not feature the backing used for mounting like part # HP36VR. The aluminum fender we carry is part # HP96VR. The installation of this fender is done by drilling and using mounting screws in the lip of the fender. I have attached a link to a video that shows how these fenders are installer.
view full answer... - Jeep Style Aluminum Fender Recommendation for Off Road Tear Drop CamperThe Single Axle Trailer Fender # HP96VR that you referenced would be a great choice for a fender for your trailer, BUT I cannot recommend you use a set of Jeep rims on your trailer. You really need to use a rim and tire designed and rated for use on a trailer. I attached a link to a page that has all of the trailer rims we carry plus a link to an install video for this fender for you to check out. The dimensions of the fender are 10" wide x 33" long x 17" tall. You should haven't a problem...
view full answer... - Recommended Aluminum Trailer Fenders For 14 Inch WheelsWe do offer a couple of aluminum fenders designed to work with 14 inch wheels. For a Jeep-Style design I recommend part # HP96VR. This is designed to work with 13 to 15 inch wheels, and measures 10 x 33 x 17 inches. The fender has a 1/2 inch lip on the radius. I have attached a product review video for this fender you can check out. The other aluminum fender we carry that is designed to work with 14 inch wheels is part # CE17100ATB. This fender has the aluminum tread design and measures...
view full answer... - How to Attach Aluminum Tread Plate Fender Part # HP96VRThe Aluminum Tread Plate fender you referenced, part # HP96VR is designed as a weld-on application, therefore mounting brackets are not included. We do not carry any mounting brackets specifically designed for these fenders, you would probably need to have brackets fabricated and welded to the fender in order to stiffen it and provide a larger mounting surface. The inside lip of the fender is only 1/2 an inch wide, which would not provide enough room to securely bolt the fender in place.
view full answer... - Replacement Jeep Style Fender Recommendation For 15 Inch WheelWe offer 2 different Jeep Style fenders that are designed to work with 15 inch wheels. The aluminum fender we carry is the etrailer brand Trailer fender, part # HP96VR. This fender has a 1/2 inch radius lip on both the front and the back of the fender and has an aluminum tread plate design. I have attached an installation video for this fender you can check out. The second jeep Style fender we offer is part # HP76VR. This is a 16 gauge steel fender that is a weld-on application.
view full answer... - Aluminum or Steel Trailer Fenders for 15 Inch Wheels with Diamond Tread Plate DesignFor 15 inch tires we have the following fenders. Please note that at this time we do not have any options for tandem axles: Jeep style fender # HP96VR, aluminum, tread plate or CE Smith Jeep style # CE18041ATB, aluminum, tread plate, 36 inches long (We do not have the rounded version that you were asking
view full answer... - Replacement Weld-On Fender for 13 inch WheelsWe do have a wide variety of replacement fender options, and while none of them match your current specs directly, you could go ahead and replace both fenders so that everything matches up. The fender we have that closest matches your description is the Single Axle Jeep Style Trailer Fender # HP96VR which will fit for your 13" wheels but it measures 33" long x 10" wide x 17" tall so it's a bit wider than what you currently have. I'm attaching a link to our selection of fenders for 13"...
view full answer... - Will the Small Edge Trim for Enclosed Trailer Fit Jeep Style Diamond Fender?Hello again Bruce, I wasn't completely sure whether the Small Edge Trim for Enclosed Trailer # 362ET4119-25 would fit over your 0.100" thick aluminum, so I tested it on the Single Axle Jeep Style Trailer Fender # HP96VR, which is the same thickness. It fits great! You can see how well it sits over the edge in the picture I attached. For a little extra security, I would tape off the fender and apply a rubber-safe spray adhesive where you'll be installing the trim. You should be able to...
view full answer... - Timbren Axeless Suspension and Other Parts Needed to Build Lightweight TrailerThanks for the detailed information! I will be happy to help you set up your trailer and give you accurate weights. We have an in house system that gives us specific product weights. The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Drop Spindle - Off-Road Tires - 2,000 lbs item # ASR2KHDS09 have a weight of 98 lbs. The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - item # AKHD-545-35-EZ-K The Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10"...
view full answer...
Do you have a question about this Trailer Fender?
Used Items Available
Condition: Badly Dinged
Notes: Item has a minor cosmetic crease at one end of the fender.
Info for this part was:
Expert Research:
Mike L
Edited by:
Lindsey S
Installed by:
Jeff D
Updated by:
Wilson B
Written by:
Alexander C
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
6/5/2025
They look fantastic on your trailer, Matt! I definitely think they look better on your trailer than the round ones.