See what our Experts say about this Yakima Roof Rack

• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• What Length/Type Of Crossbar For Mounting Two Hullavators On 2025 Subaru Outback Wilderness?
  Hey Carol, I can definitely help with that! You will need to go with an extra long crossbar to accommodate two of the Thule Hullavators # TH898 on your 2025 Subaru Outback Wilderness, but it can be done. The best roof rack for this will be a Yakima JetStream rack since the design of their crossbars allows longer bars to work. Each Hullavator requires 28-1/2" of bar space so a 60" crossbar will do great. Here are the parts you need: - TimberLine Towers for Yakima Crossbars - Raised, Factory...
  view full answer...
• What End Caps do I Need for My Yakima CoreBar Crossbars?
  Hello Tony, You will want the Replacement Endcaps for Yakima CoreBar Crossbars - Qty 2 # 8880640 for your Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422. What do you mainly use your roof rack for?
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Can I Put A 60" Long Crossbar On A 2022 Subaru Outback
  Hello Joe, thanks for reaching out. Yes, it is possible to put a 60" (or longer) crossbar on your 2022 Subaru Outback. I will need to verify a bit more vehicle information before I can recommend the correct parts. Does your outback happen to be the Wilderness edition? Let me know. Also please verify that your Outback has the factory installed raised rails running from front to back. Let me know and I will be able to narrow down the right roof rack. For example, if you do have the Wilderness...
  view full answer...
• Recommended Way to Carry a Kayak for a Ford F-150
  As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
  view full answer...
• How to Carry a Kayak and a Canoe on a 2014 Subaru Outback Wagon
  I do have an option for you but we don't really have any feasible solutions for you to carry both a kayak and canoe on the roof of your 2014 Subaru Outback Wagon at the same time. Instead, I recommend placing both the kayak and canoe on a pull behind trailer like the Malone EcoLight Trailer part # MAL. In order to pull a trailer with your vehicle you will need a trailer hitch, wiring harness, and ball mount/hitch ball. For this I recommend using the Draw-Tite Trailer Hitch part # 75673,...
  view full answer...
• Will the Malone AirFlow 2 Work for My Roofnest Falcon XL Tent on My 2011 Chevy Suburban?
  The Malone AirFlow2 # MPG217 will work with your Roofnest Falcon XL on your 2011 Chevy Suburban only if your total weight is less than 165 pounds. Also, as far as fitting the crossbars of the AirFlow2, your tent will fit as long as the clamps/mounting hardware can fit a crossbar with measurements of 3 inches wide x 1 inch tall. I recommend measuring the maximum dimensions of the clamps/mounting hardware of your Roofnest Falcon XL. If you need an option with a higher weight capacity for...
  view full answer...
• Correct Yakima Towers for a 2023 Toyota Sequoia
  The towers compatible with your 2023 Toyota Sequoia is going to be those TimberLine Towers for Yakima Crossbars # Y33TR. These towers will work with Yakima's JetStream # Y00426, HD # Y01157, CoreBar # Y00422, and RoundBars # Y00409.
  view full answer...
• Is Thule Hullavator Kayak Carrier Compatible with Yakima CoreBar Crossbars
  The Thule Hullavator Pro Kayak Carrier # TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit # TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work correctly and avoid contacting your vehicle. I have attached a photo showing how to make sure your CoreBar is long enough. If you happen to need longer CoreBar crossbars we have them available here: 50" - # Y00421 60" - # Y00422 70" - # Y00423 80" - # Y00424
  view full answer...
  
• What Kayak Load Assist Can I Use With My Lockrack For My 2016 Subaru WRX
  I do have a solution for you, but will not involve the Lockrack Loading Bar. You will still have to remove, or adjust the orientation, of the arms for this solution to work, but this method would be your only option. You can use the following items to help you load your kayak with the Lockrack Loading Bar. The Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 lbs, part # RR-RUSL. This load assist bar clamps to your roof top rack and it has a weight limit of 132 lbs....
  view full answer...
  
• Can the Yakima 60 Track System Be Installed On Naked Roof Vehicles?
  You can use either the Yakima 54" tracks # Y01127 or 60" tracks # Y01135 on naked roofs without needing to remove the headliner, and as long as you're careful, you won't damage the headliner during installation. It should be noted that the 60" tracks are usually too long for most vehicles with naked roofs, which is why the title is so vague. The Yakima 54" kit comes with the PlusNut Hardware but to install the 60" tracks on a naked roof you would need to purchase a PlusNut Hardware kit...
  view full answer...
• Will the Thule Hullavator Fit on a Yakima Roof Rack?
  As far as the Thule Hullavator # TH898, it will attach to most styles of Yakima crossbars (for example, the JetStream crossbars # Y00425, the Round Bars # Y00409, and the CoreBars # Y00422). However, you need additional components to mount Yakima crossbars to your roof. In order to give you a complete system, please respond to this answer with the year/make/model of your vehicle. Also, something else needs to be considered. In order for the Hullavator to function, there needs to be at...
  view full answer...
  
• Bar Length for Carrying two Yakima ShowDown Kayak Carriers
  Since the Yakima Showdown part # Y04081 hangs over the crossbars quite a bit when installed and they are 42 inches long the best bar length for two of them would be 60 inch like you mentioned. So for that you'd want the # Y00426 if you had the Jetstream bar setup or the # Y00422 for the CoreBar since these are the only two bar styles from Yakima that are available in 50 inch and 60 inch.
  view full answer...
• Temporary Roof Rack Solution Using Tracks on Bed Rails of 2012 Honda Ridgeline with OEM Tonneau
  There isn't a roof rack option specifically designed to mount on top of your bed rails and work together with the OEM tonneau cover on your 2012 Honda Ridgeline, so the closest option I have for you is going to be a Yakima Custom Install Roof Rack. To accomplish this, you'll need a set of SkyLine Towers (qty 4) # Y53TR, a pair of CoreBar Crossbars # Y00422, four total landing pads # Y00221 (sold in pairs), and 54 inch Tracks # Y01127. The Yakima Tracks, # Y01127, are designed for sheet...
  view full answer...
  
• Adapter For Yakima ButtDown 6 Ski Rack to Mount to Aero Bars
  There is a way for you to mount your Yakima ButtonDown 6 ski rack to aero bars like the Yakima CoreBar Crossbars # Y00422. Yakima has confirmed for us that in order to do this, what you will need are the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590. I have added a link below to the instructions and a video review for you to check out as well.
  view full answer...
• How to Install Yakima Skyline Tower Setup on Camper
  The only way to install a Yakima Skyline tower setup on a camper like what you have will require installing a set of tracks on the roof first like with the part # Y01135. If you have the clearance for the 60 inch long tracks, then the Yakima tracks will mount to your camper. You will need to use the SkyLine Towers, # Y00148, to attach any of the Yakima crossbars to the track system. Also, the Yakima Landing Pad 1, # Y00221, is needed to attach the SkyLine towers to the track rack. The...
  view full answer...
• Do Yakima CoreBar Crossbars Work With Roof Top Tents On Jeep Cherokee
  Yes, RTT's such as the Yakima SkyRise, # Y07437 work with the Yakima CoreBar Crossbars, # Y00422. Please note the linked product review and installation videos below.
  view full answer...
• Yakima Towers Needed to Mount to Landing Pad 1 on Track System
  It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
  view full answer...
  
• Roof Rack for 2000 Chevrolet Astro Van With Naked Roof
  Hi Alex; for your 2000 Chevy Astro I recommend the Yakima 54" Tracks for Roof Racks # Y01127. This uses PlusNuts for installation which will not require removing the headliner. For the complete roof rack you will also need two sets of Landing Pad 1 # Y00221, SkyLine Towers for Yakima Crossbars # Y53TR, and crossbars like the Yakima CoreBar Crossbars - 60" Long # Y00422. Based on other roof racks for the Astro with raised rails 60" will be an appropriate length for crossbars.
  view full answer...
• What Yakima Roof Rack Will Fit My 2018 Toyota 4Runner With Fixed Points
  After reading your question, it appears that you would like your front crossbar to be further forward on the roof of your vehicle. The Yakima system you are referencing, the old Q-tower system or its replacement the BaseLine system, are for naked roof applications. That does not apply to your vehicle. Your 2018 Toyota 4Runner has raised rails with fixed points, so a rack that attaches to the frame of your vehicle will not work. Your roof rack will attach via the Yakima Landing Pads which...
  view full answer...
  
• Is There a Way to Use an Older Thule Hullavator 897XT on Yakima CoreBars
  I do have an option for you, but there is not any sort of adapter that will allow the Thule Hullavator Kayak Carrier 897XT to be used with the Yakima CoreBar Crossbars like part # Y00422. You can continue to use the Thule Hullavator Kayak Carrier 897XT, but you will need to switch out the Yakima CoreBar Crossbars for Yakima JetStream Crossbars like part # 8880649 and then get the Thule Hullavator Kayak Carrier 897XT Track Mount Adapter part 7521383001 from Thule. If you don't want to...
  view full answer...
• Transporting Two 68-lb Sit-on-Top Fishing Kayaks on 2017 Honda Ridgeline
  Since your fishing kayaks are fairly heavy at 68-lbs each you could be above the total weight capacity for the roof on your 2017 Honda Ridgeline by the time you add the weight of the Yakima roof rack and the two Malone J-style kayak carriers. Their Downloader # MPG114MD and J-Pro # MPG117MD carriers weigh 12-lbs each so two of these is another 25-lbs or so in addition to the 18-lb weight of the Yakima roof rack. The kayaks and these items total about 179-lbs and that is more than most vehicle...
  view full answer...
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
  Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
  The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
  view full answer...
• 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
  I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Best Roof Rack for 2020 Kia Soul with Fixed Mounting Points
  The best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
  view full answer...
• Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
  Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
  view full answer...
• Will Malone SteelTop Roof Rack Fit 2025 Subaru Outback
  Hi John; is your 2025 Outback the Wilderness model? The Malone SteelTop Roof Rack # MPG203 only fits the rails on the Wilderness. This will not fit the factory rails on the regular Outback models. If that is what you have, let me know in the comments below and I can see what else is available. Are you looking for a specific crossbar length?
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Roof Rack for 2018 Jeep Wrangler JL Unlimited Hard Top to Carry Thule Hullavator Pro Kayak Carrier
  There are a couple options for a roof rack on your 2018 Jeep Wrangler JL Unlimited with a hard top, from Yakima and Thule, with both allowing you to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The parts you need for the Yakima roof rack consist of: - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 6 # Y00226 The parts you need for the Thule roof rack consist of: - Thule WingBar Evo Crossbars...
  view full answer...
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
  First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
  view full answer...
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
  Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
  You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
  view full answer...
• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
  For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
  view full answer...
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
  I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
  view full answer...
• Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
  Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Distance Between T-Slots on RetraxPRO XR For 2024 Chevrolet Colorado
  Hey Aaron! The 55" bars won't be long enough since the # RTX24TR T-slots are 56-3/4" apart. There is a higher cost but I do prefer the quality of the Yakima crossbars/setup over Rhino-Rack so I would grab the 60" Yakima JetStream Crossbars # Y00426. You will also need the SkyLine Towers # Y53TR and Landing Pads # Y00221.
  view full answer...
• Recommended Roof Rack Replacement System for a 2014 Toyota FJ Cruiser
  It looks like the picture came through, Jessica. From what I can see, it looks like the issue is with the OEM rails, which we aren't going to be able to fix. No matter which set of crossbars you choose, you're still going to have a pretty tall setup because the OEM rails are pretty tall. What you could do, is use a track system # RTC16 which would require you to remove your OEM bars. From here you'd need to add the landing pad # Y00221, towers # Y53TR, and bars # Y00425. This would...
  view full answer...
• Parts Needed to Use Yakima SkyLine Tower Setup from ARE Truck Camper on 1998 Jeep Wrangler
  To use your Yakima SkyLine setup on your 1998 Jeep Wrangler you just need the 42" Tracks # Y01126 and 2 sets of the Landing Pad 1 # Y00221. This will then allow you to easily transfer the SkyLine Towers # Y53TR and whatever crossbars you are currently using, like the 50" JetStream # Y00425. Just be sure that the crossbars from your ARE camper shell don't stick out further than the side mirrors on your Jeep. I have attached installation instructions for you to check out.
  view full answer...
• What Are The Roof Racks That Come With The Nucamp Boondock Tab 320s Travel Trailer Called?
  I reached out to my contacts at Yakima and they advised that the roof racks that come with the 2018 Nucamp Boondock tab 320s travel trailer are Round Cross Bars for Yakima Roof Rack System # Y00409. The Nucamp Boondock trailer model has 58" bars, but they are also available in 48", 66", 78" and 86" long. To attach the Round cross bars you will need the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers Qty 4 # Y03536. You will also need the Landing Pad 1...
  view full answer...
• Recommended Roof Rack System for A.R.E. Camper Shell with Tracks
  The items mentioned in your question are exactly what you need to install a roof rack system to the A.R.E. Camper Shell on your Ford F-150. Just to confirm, you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper...
  view full answer...
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
  First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
  view full answer...
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
  Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
  You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
  view full answer...
• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
  For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
  view full answer...
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
  I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
  view full answer...
• Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
  Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Distance Between T-Slots on RetraxPRO XR For 2024 Chevrolet Colorado
  Hey Aaron! The 55" bars won't be long enough since the # RTX24TR T-slots are 56-3/4" apart. There is a higher cost but I do prefer the quality of the Yakima crossbars/setup over Rhino-Rack so I would grab the 60" Yakima JetStream Crossbars # Y00426. You will also need the SkyLine Towers # Y53TR and Landing Pads # Y00221.
  view full answer...
• Recommended Roof Rack Replacement System for a 2014 Toyota FJ Cruiser
  It looks like the picture came through, Jessica. From what I can see, it looks like the issue is with the OEM rails, which we aren't going to be able to fix. No matter which set of crossbars you choose, you're still going to have a pretty tall setup because the OEM rails are pretty tall. What you could do, is use a track system # RTC16 which would require you to remove your OEM bars. From here you'd need to add the landing pad # Y00221, towers # Y53TR, and bars # Y00425. This would...
  view full answer...
• Parts Needed to Use Yakima SkyLine Tower Setup from ARE Truck Camper on 1998 Jeep Wrangler
  To use your Yakima SkyLine setup on your 1998 Jeep Wrangler you just need the 42" Tracks # Y01126 and 2 sets of the Landing Pad 1 # Y00221. This will then allow you to easily transfer the SkyLine Towers # Y53TR and whatever crossbars you are currently using, like the 50" JetStream # Y00425. Just be sure that the crossbars from your ARE camper shell don't stick out further than the side mirrors on your Jeep. I have attached installation instructions for you to check out.
  view full answer...
• What Are The Roof Racks That Come With The Nucamp Boondock Tab 320s Travel Trailer Called?
  I reached out to my contacts at Yakima and they advised that the roof racks that come with the 2018 Nucamp Boondock tab 320s travel trailer are Round Cross Bars for Yakima Roof Rack System # Y00409. The Nucamp Boondock trailer model has 58" bars, but they are also available in 48", 66", 78" and 86" long. To attach the Round cross bars you will need the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers Qty 4 # Y03536. You will also need the Landing Pad 1...
  view full answer...
• Recommended Roof Rack System for A.R.E. Camper Shell with Tracks
  The items mentioned in your question are exactly what you need to install a roof rack system to the A.R.E. Camper Shell on your Ford F-150. Just to confirm, you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper...
  view full answer...

Do you have a question about this Roof Rack?