1. Trailer Hitch Ball Mount
  2. etrailer
  3. Fits 2 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 2 Inch
  6. Drop - 4 Inch
  7. Rise - 1 Inch
  8. Rise - 3 Inch
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

Item # 989900
lowest price pledge
Our Price: $88.92
Trailer Hitch Ball Mount
This item qualifies for Free Shipping
Shipping Weight: 20 lbs
Quantity: 
In Stock
etrailer Fixed Ball Mount - 989900
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Lowest Prices for the best trailer hitch ball mount from etrailer. etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs part number 989900 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (643)
  • Q & A (3703)
  • Videos (2)
  • Photos
  • Why etrailer?

etrailer Trailer Hitch Ball Mount - 989900

  • Fits 2 Inch Hitch
  • Fixed Ball Mount
  • Drop - 2 Inch
  • Drop - 4 Inch
  • Rise - 1 Inch
  • Rise - 3 Inch
  • etrailer
  • Two Balls
  • Class III
  • 7500 lbs GTW
  • Ball Mount Kit
  • Steel Shank - Gloss Black
  • Steel Ball


Features:

  • Includes everything needed to tow multiple trailers, even of different heights
  • Works with 2" x 2" trailer hitch receivers (Class III)
  • Kit includes:
    • (1) Ball mount with 3/4" rise or 2" drop (# 2923)
      • Capacity: 7,500 lbs GTW and 750 lbs TW
    • (1) Ball mount with 2-3/4" rise or 4" drop (# 2753)
      • Capacity: 7,500 lbs GTW and 750 lbs TW
    • (1) 1-7/8" x 1" x 2-1/8" trailer hitch ball (# 19260)
      • Capacity: 2,000 lbs GTW
    • (1) 2" x 1" x 2-1/8" trailer hitch ball (# 63845)
      • Capacity: 7,500 lbs GTW
    • (2) Pin and clip (# PC3)
    • (1) etrailer ball mount bag (# ETBMB)


989900 etrailer Ball Mount Kit - 7,500 lbs





Video of etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer.com Ball Mount Kit for 2 inch Hitches Review


Customer Reviews

etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs - 989900

Average Customer Rating:  4.9 out of 5 stars   (643 Customer Reviews)


- 989900
by:

The leaf spring you shipped me was fine, but you were supposed to send me TWO. Waiting for the second one, please send it as fast as you can, because I really need it. 699786



- 989900
by:

Excellent kit, a must purchase. They didn't skimp on the powder coating. 78197


Comments
Thanks for the contact Patrick. Everything is working beautifully. Ive received many comments from friends about how the hitch system looks factory installed on my 06 Jeep Rubicon. The draw-tite system is the only way to go in my book. It handles my 5 x 8 trailer famously. Have a great day, Bill Richards
Bill R - 06/05/2014

4675

- 989900
by:

Great Package for most towing needs conveniently in a bag !! 574948



- 989900
by:

Nice little kit! Great to have with different size trucks or trailers! 443635


Comments
All is great and I will try to give more reviews as I have time.
Randy H - 10/18/2018

44760

- 989900
by:

This is one of the items that has saved me a LOT of time. Since I use both my truck and my car (both have Curt hitches ordered from etrailer) for towing my half dozen or so different types of trailers, I am constantly needing to adjust the ball size and/or height depending on the combination of vehicle and trailer. With this kit is takes literally less that 30 seconds every time for me to configure to exactly my needs. Also, the bag is excellent for keeping crud and ball grease off my vehicle interiors and is big enough to hold a ball wrench inside as well. Cannot beat the price either for so much convenience and saved time. 448088



- 989900
by:

The hitch did not fit in the receiver on my BMW X5. The BMW receiver has a closed end, the hitch was longer than the depth of the receiver which prevented the insertion of the locking pin. 679822



- 989900
by:

Shipping - The hitch, ball mount-kit, wiring harness, and brush all arrived quickly in a single, heavy-duty cardboard box. The packaging was excellent! There had to have been a hundred heavy-duty staples used to secure everything. Installation - The video and paper instructions were spot-on and made the install much more straight forward. For two non-mechanics, it took us about 2 hours from the time we pulled the car into the garage until all the tools were put away to install the hitch, wiring harness, and mount the balls on the sleeves. We did not lift the car might have made it a little easier but totally doable. The only actual difficulty we had was pulling the rubber muffler mounts off. A little lubrication helps. Reinstalling them is easier. 450720


Comments
All items continue to work well with no issues.
Dan S - 11/08/2018

45526

- 989900
by:

I installed the draw tite hitch onto my brand new 2018 Subaru outback. I'm 68 years old, not as strong as I was, but proud to say I did the job all by myself in about 4 hours. Here are some tips you may find useful. Watch the video-it’s pretty good. I had difficulty getting the exhaust system down and worried about getting it up again from the moment I got it down...read on-help will follow. I bought a stepup drill bit which worked great for drilling the hole in the chasis. I clamped the hitch onto a floor jack, then rolled it and raised it into position. Used metal shears to easily cut out the heat shield as per the video. Your inclination will be the screw the fishing tool provided all the way up the carriage bolt. That won’t work; just screw it on to the tip of the bolt. I couln’t get the exhaust hangars in place even after lubricating them with wd-40. I dropped the rubber hangars into undiluted liquid car wash soap which made them much more slippery than the wd-40. After that the rubber hangars slipped into place pretty easily-that’s my best tip. Finding the electric connection plug for the wiring harness was almost as hard as installing the hitch. I was very happy with how the job came out. Good luck. 428039



- 989900
by:

Thank you for the informative video instructions as well as helpful / honest reviews to research prior to making the purchase. I do not have anything to add that has not been covered in the reviews. Here is a recap of my experience that has been consistent with others. 1. Box was received with the driver side of the hitch pushed out. Only minor scratches which you can not see when installed and it did not impact the installation. Wrapping each end would probably be a good idea as stated in other reviews. 2. Removing 14 years of rust was the hardest part of the install (from the passenger side holes). Total time was approximately 1 hour as others have experienced. I used the bolts from the factory tie hook to work out the rust using 1/2" round wire brush attached to a cordless drill along with a full can of WD-40. 3. Installation of the hitch took about 30 minutes with assistance of a foot stool. 4. Plug-n-play electrical connector took about 10 minutes after watching the video. 5. Perfect fitment, fast delivery, easy website ordering experience and follow-up status notifications, and I can not be more pleased with the cost being under $200 for a DIY project. I required this setup to tow a ~1,000 lb motorcycle trailer with a ~1,000 lb motorcycle next week and my Honda has a 3,500 lb towing capacity. Thank you etrailer.com! 427068



- 989900
by:

Could not have been easier. I was able to find what I needed by looking at just the items for my vehicle. Item arrived days ahead of schedule. Items were well packed. Tongues appears to be well constructed, but they were made in China. Sturdy pins and a handy bag with enough room for your wrench besides. Very happy with my purchase and good to do business with a local company, too. 560030



- 989900
by:

Don’t know what trailers I’ll be pulling, so a mix of balls and hitches like this made sense. And not all that much more expensive than a single set up. 567816


Comments
Solid, quality finish has prevented rust on ball mounts and balls are heavily chromed. Good quality stuff.
Rob - 09/22/2019

61404

- 989900
by:

Good value and having the 2 options saved us because the higher rise ball mount did not work with the accessory bike rack and I was able to go with the lower rise instead. 562961



- 989900
by:

The good: It works. The not so good: 1. The lock washer on the ball stud makes it really hard to remove the nut. The lock washer cuts into the nut, essentially preventing it from unscrewing. This is good from a safety standpoint, but makes changing the configuration really hard. I had to lock it into a bench vice and use a pipe wrench to get it off. 2. Not sure what happened, but first time I used it (to pull a rental trailer), the hitch pin fell out, causing the trailer to disconnect. Best I can figure is that the cotter pin popped off. Fortunately, I wasn't on the highway, and the safety chains kept the trailer attached. But it was pretty scary. I replaced it with a locking pin, and had no further issues. 554118



- 989900
by:

Delivery was very fast. Ball mounts and vehicle trailer lights plug were high quality and perfect fit for my GMC. 910722



- 989900
by:

Super fast shipping. Heavy duty, quality materials. 909767



- 989900
by:

I purchased the set not knowing which mount I would need for our soon-to-be manufactured travel trailer - but I am glad I did because when we went to pick up our trailer, one of them (inverted) turned out to be the perfect fit for a level trailer. I later substituted the supplied pin for a permanent bolt-in attachment, to reduce the clunking noises. Otherwise, it's been great, no issues. 906065



- 989900
by: 10/29/2020

905595



- 989900
by:

Excellent service, fast delivery, helpful web site, great prices and great products. Thank you etrailer! 904629



- 989900
by:

The person who we ordered through was very helpful and knowledgeable. Able to guide us through the process and make recommendations appropriate for the project. Got here in nothing flat! Took us completely by surprise when it arrived. 904198



- 989900
by:

903200



- 989900
by:

Everything was packaged just as I ordered it. This went on in 30 min's. All bolts lined up perfectly. 898830



- 989900
by:

Makes towing easy using the ball mount kit. 898793



- 989900
by:

Exactly as advertised. 898230



- 989900
by:

Very heavy and well made. 898133



- 989900
by:

893807


27
651
Show More Reviews

Ask the Experts about this etrailer Trailer Hitch Ball Mount

  • Recommended Ball Mount for 2018 Subaru Outback with Draw-Tite Hitch
    Your hitch pin hole on your hitch receiver # 75673 is about 5 inches from the outer part of your bumper. The Curt Ball Mount # D-26 you mentioned measures 12-5/8 inches from the center of the pin hole to the center of the hitch ball, so that would be overkill. I recommend the etrailer.com Ball Mount Kit for 2" Hitches - 7,500 lbs # 989900 which will have a measurement of 8-1/2 inches from center of pin to center of hitch ball or 9 inches depending on which draw bar is used. This...
    view full answer...
  • 2-5/16 Inch Trailer hitch Ball for etrailer Ball Mount Kit 989900
    There is a 2-5/16" trailer hitch ball you can use with the etrailer.com Ball Mount Kit for 2" Hitches # 989900. The Draw-Tite 2-5/16" Hitch Ball # 63847 has a 1" diameter shank which is the correct size to fit the ball mounts in this kit. Adding this hitch ball with the Ball Mount Kit will give you all three hitch ball sizes: 1-7/8", 2" and 2-5/16". I have added links to video reviews for you to check out as well.
    view full answer...
  • Can the eTrailer Ball Mount Kit Be Ordered with a Locking Hitch Pin
    The Ball Mount Kit part # 989900 does not come with a locking hitch pin like the Tow Ready J-Pin Stabilization Pin and Barrel Lockset part # 63201 nor can you substitute parts. That said, if you didn't want any extra parts you can purchase each of the components in the Ball Mount Kit separately which I have listed out for you below. Draw-Tite Ball Mount 2" Drop part # 2923 Draw-Tite Ball Mount 4" Drop part # 2753 1-7/8" Hitch Ball part # 19260 2" Hitch Ball part # 63845 etrailer...
    view full answer...
  • Trailer Hitch Receiver and 7-Way Trailer Wiring Harness for 2009 Honda Element
    We do have all the parts you need in order to add a trailer hitch receiver to your 2009 Honda Element as well as add a 7-way trailer wiring harness. Starting with the trailer hitch receiver I recommend the Draw-Tite Trailer Hitch Receiver # 75659. The reason the Draw-Tite is the best option is because it is the only 2" hitch that is available for your 2009 Element which does not require drilling to install. I have added a link to a video install for you to check out as well. Then to...
    view full answer...
  • Choosing a Ball Mount with the Correct Rise and Drop
    To determine the rise or drop you'll need in a ball mount you will want to measure from the ground to the bottom of your trailer's coupler with the trailer sitting level. Then with you 2004 Ford Ranger sitting level measure from the ground to the inner top of the trailer hitch receiver opening. For example: you've measured your trailer at 19 inches already. If you measure the receiver at 21-1/2 inches then you will need a ball mount with drop of 2-1/2 inches to make everything level. I...
    view full answer...
  • Torque Rating for Hitch Balls in Etrailer.com Ball Mount Kit for 2 Inch Hitches
    The torque rating for both the 1-7/8 inch and 2 inch hitch balls that are included in the etrailer.com Ball Mount Kit # 989900 is 250 foot-pounds.
    view full answer...
  • Ball Mount Kit Recommendation for 2018 Mercedes GLS 450
    Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball...
    view full answer...
  • Does Length of Ball Mount Affect Tongue Weight on Hitch Ball
    The length of the ball mount used in a trailer hitch does not affect the amount of tongue weight (TW) applied to the hitch ball by the trailer, but it does affect the amount of stress applied to the hitch's receiver tube by the ball mount. A very long ball mount would apply MORE pressure to the hitch tube than a shorter one, much in the same way that adding a cheater bar to a tire iron (to make it longer so you have more leverage) will allow you to put more pressure on the lug nut. This...
    view full answer...
  • Recommendation for Ball Mount and Hitch Ball for 2011 Jeep Grand Cherokee to Tow Utility Trailers
    To tow a trailer with your 2011 Jeep Grand Cherokee you will also need a ball mount, hitch pin and clip, hitch ball, and wiring harness. Based on my research, the Draw-Tite Trailer Hitch on your Grand Cherokee is a 2 inch Class III trailer hitch, # 75699. To provide you with a great starter kit for towing, I recommend the etrailer.com Ball Mount Kit for 2 Inch Hitches # 989900. This kit includes 2 ball mounts (one with a 3/4 inch rise or 2 inch drop and the other with a 2-3/4 inch rise...
    view full answer...
  • Determining Correct Ball Mount to Use for Towing Load Rite Trailer with 2012 Honda Pilot
    When determining the needed rise or drop to tow the trailer level with your 2012 Honda Pilot, you will just want to take a couple measurements. First, with the trailer parked on level ground, you will take a measurement from the ground to the bottom of the coupler. I was unable to locate this measurement on your Load Rite trailer in my research, but you should be able to get this information from the dealer since it doesn't sound like you have it on hand yet. Then, on your Honda Pilot,...
    view full answer...
  • How to Determine Correct Ball Mount To Keep Towed Trailer Level for Best Handling
    There's a simple way to determine how much drop (or rise) you need from a ball mount in order to keep your towed trailer level. A level trailer handles better so you're wise to get it right! Please refer to the linked article. This explains how to measure the hitch receiver height on the Highlander and also the coupler height on the level trailer. The difference between the two is the drop or rise needed in the ball mount. Hitch height - trailer height = drop; trailer height - hitch...
    view full answer...
  • How to Pick Out Ball Mount for 2016 Mercedes Benz GLE
    I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom of the trailer coupler when the trailer is on level ground. Next, you will need to compute the difference. If the hitch height...
    view full answer...
  • How to Pick Out the Correct Rise/Drop Ball Mount for a 2014 Ram 1500 ST Regular Cab 4x2
    The etrailer.com Ball Mount Kit # 989900 that you referenced is a great choice for someone who isn't sure what rise/drop ball mount they will need since this kit offers several options. But the best way to pick out a ball mount is to go with one that will allow your trailer to be towed as level as possible. Check out the FAQ article I attached to the right that details how this is done.
    view full answer...
  • What Ball Mount and Suspension Kit for Towing 2000-lb Trailer with 2013 Toyota Highlander SE Model
    A ball mount with rise or drop is helpful in matching the different heights of the trailer hitch on a tow vehicle and the coupler on a trailer. It is important that your trailer frame be level when hitched to your Highlander to ensure stability when towing. Please note that a different height ball mount will not reduce rear-end sag in your tow vehicle; but we do offer suspension products that will help. We offer a wide range of both fixed and adjustable ball mounts (the adjustable type...
    view full answer...
  • Determining Best Ball Mount for 2019 Toyota Tacoma
    The etrailer.com Ball Mount Kit # 989900 referenced in your question includes two different ball mounts, one with a 3/4 inch rise or a 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. In order to ensure that one of these units will be sufficient to tow your trailer(s) level will depend on the coupler height of your trailer (in addition to the hitch receiver height on your Tacoma). With your Tacoma parked on level ground you will want to take a measurement from the ground to...
    view full answer...
  • Will the Tow Ready J-Pin Stabilization Pin Part # 63201 Work with Standard Ball Mounts
    The etrailer Ball Mount Kit for 2" Hitches part # 989900 is compatible with the Draw-Tite Max-Frame Trailer Hitch part # 76022 and all other Class 3 hitches made by DrawTite or Hidden Hitch that have the dual hole design. The Tow Ready J-Pin Stabilization Pin part # 63201 is designed to put pressure on the shank of the ball mount rather than actually going into a hole in the shank. As you tighten down the J-pin it pushes on the side of the ball mount to force it against the opposite...
    view full answer...
  • Ideal Hitch Ball Height for a 2008 Toyota Highlander V6
    The hitch ball height you need depends entirely on the specific trailer you will be towing. There is no ideal height that would be universal for a certain vehicle. Trailers come in all different heights, so you will need to take some measurements to determine the correct rise or drop you will need on your ball mount. This is what will allow you to put the hitch ball in the correct placement for hooking up your trailer. First, you will need to measure from the ground to the top of...
    view full answer...
  • Ball Mount Recommendation for a 2014 Nissan Frontier
    The right ball mount is going to be the one that allows you to tow the trailer level. To figure out which ball mounts will do that there are a couple of measurements needed. On the 2014 Nissan Frontier measure from the ground up to the top of the receiver opening. On the trailer, make sure the trailer is level and measure from the ground to the bottom of the coupler. If the vehicle measurement is higher the difference is the amount of drop you will need. If the trailer is higher the...
    view full answer...
  • Recommended Ball Mount For Class lll Hitch On 2015 Jeep Grand Cherokee
    I have attached a helpful article that explains how to measure to make sure you get the correct ball mount for your 2015 Jeep Grand Cherokee. Since you are not sure you may want to take a look at the etrailer Ball Mounts, part # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. I have also attached links to our product...
    view full answer...
  • Torque and Wrench Size Needed for Balls of etrailer Ball Mount Kit 989900
    The Tow Ready 2 Inch Hitch Ball, part # 63845, of the ball mount kit part # 989900 you have referenced needs to be torqued to 250 foot pounds. The size of socket or wrench needed to tighten that would be a 1-1/2 inch and then for the diameter of the crowsfoot or wrench for holding the ball it would need to be 1-3/4 inch.
    view full answer...
  • What is Needed to Tow a Trailer with a 2012 Honda Pilot
    Are you looking for a wiring harness to power a trailer's lights or the ball mount that slides into the factory hitch receiver on your 2012 Honda Pilot and then holds the hitch ball that the trailer connects to? Either way we have what you need. I've linked some articles on towing you might find helpful. Particularly one that outlines everything you need to tow a trailer. All 2012 Honda Pilots have a 2 inch, Class III factory trailer hitch receiver already installed on them. In order...
    view full answer...
  • Coupler Size on 2006 Rockwood Freedom 1940 Pop-Up Camper
    The Forest River website does not provide coupler size information for the many different pop-up campers in their Freedom series. However, on the coupler itself, either stamped into the metal or noted on a sticker, should be an indication of the ball size needed to match the supplied coupler. It is likely to be a 2-inch ball. To give you maximum flexibility for your towing needs I suggest the etrailer Ball Mount Kit # 989900 which includes two ball mounts, two hitch balls (1-7/8-inch...
    view full answer...
  • Ball Mount Kit Recommendation For 2013 Jeep Grand Cherokee Towing A Rented Trailer
    I recommend calling your trailer rental office and ask them what size coupler they have on the size trailer you plan on towing. Typically, there should be either a 1-7/8 inch or a 2 inch coupler. To cover all the bases when towing with your 2013 Jeep Grand Cherokee, I recommend the etrailer.com Ball Mount Kit, part # 989900. This kit includes 2 ball mounts, 2 balls, the pin and clip, and a handy storage bag. I have included a link to a product review video for this ball mount kit you...
    view full answer...
  • Wrench/Socket Size Needed for Hitch Balls of etrailer Ball Mount Kit # 989900
    The Tow Ready 2 Inch Hitch Ball, part # 63845, and the hitch ball # 19260 of the ball mount kit part # 989900 you have referenced needs to be torqued to 250 foot pounds. The size of socket or wrench needed to tighten that would be a 1-1/2 inch and then for the diameter of the crowsfoot or wrench for holding the ball it would need to be 1-3/4 inch.
    view full answer...
  • How to Pick Out the Correct Rise/Drop Ball Mount for a 2005 Dodge Magnum
    When we installed the Curt Hitch part # 13465 on a 2005 Dodge Magnum the top of the hitch opening ended up being 10 inches from the ground. To determine what ball mount you would need to tow your trailer level you will want to take your trailer on level ground, with the trailer sitting as level as possible and measure the distance from the bottom of the coupler to the ground. How many inches that is above or below 10 inches is the amount of rise/drop you need. So if you measure 14 inches...
    view full answer...
  • Ball Mount Kit Recommendation For 2013 Dodge Ram 1500 Pickup Truck
    If you have a 2 inch receiver opening on your 2013 Dodge Ram with the factory hitch, I recommend the etrailer.com ball mount kit, part # 989900. This kit comes with 2 balls, 2 ball mounts, the pin and clip, and a handy storage bag. I have attached a product review video for this ball mount kit you can check out. We do not offer a Curt towing starter kit.
    view full answer...
  • Trailer Towing Weight Capacity of a 2016 Chevy Traverse AWD with Tow Package
    If you check out page 260 of the owner's manual for your 2016 Chevrolet Traverse it should say that if the model is an AWD and has the towing package then the max trailer weight it can handle is 5,200 lbs. You will want to be sure to check your owner's manual to verify this and to note any instructions on towing as well. Some towing packages come with both a trailer hitch and wiring. If this is the case for you then you just need a ball mount, hitch ball, and pin and clip to complete...
    view full answer...
  • Trailer Hitch Recommendation for 2006 Land Rover LR3
    We have one hitch that is a fit for your 2006 Land Rover LR3 and it will work great for towing a small trailer, but it doesn't allow you to keep the spare mounted under the rear of the vehicle. For that you would want the Curt Hitch part # 13456. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch...
    view full answer...
  • What is the Thread Size and Type on the Hitch Balls Used in the etrailer Ball Mount Kit # 989900
    If you are looking at the balls that come in the etrailer ball mount kit # 989900, ball # 19247, is coarse threaded and has a 1-1/2 inch nut and lock washer included. Ball # 19260 is also coarse threaded and it also comes with a nut and lock washer. The shank diameter on each of these balls is 1 inch which is what the included ball mounts in # 989900 accept.
    view full answer...
  • Can Curt Fusion Ball Mount be Used In The Rise Position
    The Curt Fusion Ball Mount for 2" Hitches # C45154 is not meant to be used in the rise position because the hitch ball is stationary. However, we have better alternatives. One of our most popular products is the etrailer.com Ball Mount Kit for 2" Hitches # 989900. it includes everything needed to tow multiple trailers, even of different heights. It includes a ball mount with 3/4" rise or 2" drop and another ball mount with 2-3/4" rise or 4" drop. Also includes a 1 7/8" and 2" trailer...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Cole B
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Sarah W
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.