1. RV and Camper Steps
  2. Brophy
  3. 2 Steps
  4. Scissor Step
  5. Truck Camper
  6. Towable Camper
Brophy Camper Scissor Steps - 2 Steps - Aluminum - Diamond Tread - 17" Wide - 250 lbs

Brophy Camper Scissor Steps - 2 Steps - Aluminum - Diamond Tread - 17" Wide - 250 lbs

Item # AS02
lowest price pledge
Retail:$185.74
Our Price: $159.33
You Save: $26.41
RV and Camper Steps
This item qualifies for Free Shipping
Shipping Weight: 12 lbs
Quantity: 
In Stock
RV and Camper Steps AS02 - 250 lbs - Brophy
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

6-1/4" Deep x 17" wide aluminum camper steps expand from 18" to 23" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. Mounting bracket and hardware included. Lowest Prices for the best rv and camper steps from Brophy. Brophy Camper Scissor Steps - 2 Steps - Aluminum - Diamond Tread - 17" Wide - 250 lbs part number AS02 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (390)
  • Q & A (9)
  • Videos (1)
  • Photos
  • Why etrailer?

Brophy RV and Camper Steps - AS02

  • 2 Steps
  • Scissor Step
  • Brophy
  • Truck Camper
  • Towable Camper
  • 18 Inch Wide
  • 8 Inch Drop/Rise
  • Aluminum
  • No Ground Contact
  • 250 lbs

6-1/4" Deep x 17" wide aluminum camper steps expand from 18" to 23" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. Mounting bracket and hardware included.


Features:

  • Pull-out steps make it easy to get into or out of your towable or truck bed camper
    • 2-Step assembly expands from 18" to 23" tall
  • Scissor design lets you manually collapse steps and fold them up for travel
  • Stairs self-adjust to the terrain for increased stability
  • Lightweight, heavy-gauge aluminum construction
  • Diamond tread on each step surface provides solid footing
  • Easy installation with included mounting bracket and hardware
    • Secure the mounting bracket to your camper using the (4) 1/4" x 1-1/2" screws
    • Clip the stairs into the "V" clamps on the mounting bracket
  • Made in the USA


Specs:

  • Entry height: 18" - 23"
  • Step dimensions: 17" wide x 6-1/4" deep
  • Mounting bracket dimensions: 18-1/4" wide x 1" tall x 1" deep
  • Drop/Rise: 8"
  • Weight capacity: 250 lbs


Note: These steps are only to be used while your vehicle is stationary and should not be mounted permanently. Use the mounting bracket provided so the steps can be easily removed prior to travel. For recreational use only. Not for commercial applications.


Made of durable, rustproof aluminum, these camper steps are built to last. Their light weight makes them easy to install and set up, and their sturdy construction will give you years of use. Diamond tread on each step surface helps to ensure proper footing as you climb into or out of your camper or RV.


Quick, Easy Installation and Operation

To install the camper steps, just attach the included mounting bracket to your camper beneath the door with the supplied hardware. Once the mounting bracket is in place on your camper, you can attach the stairs by clipping them into the "V" clamps in the bracket.



AS02 Aluminum Scissor Steps, 17" Wide, 18" - 23" Tall



AS02 Installation InstructionsInstallation Details AS02 Installation instructions



Video of Brophy Camper Scissor Steps - 2 Steps - Aluminum - Diamond Tread - 17" Wide - 250 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Brophy RV and Camper Steps - Truck Camper - AS02 Review

Today we're going to be taking a look at the Brophy aluminum, scissor steps. These steps are going to attach to your RV for easier access. These are not just intended for RV use, they can be applied to many different applications. Nice, lightweight construction, they're manufactured from a heavy gauge aluminum construction for maximum strength and durability. The stairs are designed to self-adjust to the terrain and they're also going to be able to fold for compact and easy storage. Now, the unit's going to come fully assembled, very easy to install and to use. It's going to come with your detailed installation instructions, so those are included.

It's a universal mount design. On the actual step surface or platform, it's going to have that diamond tread design, that's going to provide additional traction which is going to help increase safety and sure footing. Your trailer mounting bracket is included, it's going to be this piece right here. This would mount to your application and it's going to provide the holes right here which would accept the upper bar right here. The upper bar of the steps would engage inside these hooks and that's what would hold the unit in place when you're ready to use it. Really nice design, it's also going to come with your mounting hardware, so bracket and hardware are included. The hardware right here, it's going to come with 4, quarter inch by inch and a half long lag screws.

Now, a separate mounting bracket is required if attaching this to a pickup tailgate, sold separately and can be found here at etrailer.com, by part number TSSB. The overall length of the unit from edge to edge, right here, of the bracket, this is going to give us a measurement of 18 and 1 quarter inches long. Then the mount holes on the unit are separated on center by 5 and a quarter inches. The product's made right here in the USA, as you can see it's a nice 2 step design. The extended vertical height is 18 to 23 inches high, so if the height of your mounting area where a step is needed, excuse me, is between those measurements then this would be a great choice for you. When it's fully retracted or compressed it's going to measure about 7 inches tall. Taking a look at that actual step size real quick, measuring edge to edge going this direction.

It's going to give us a measurement of about 17 inches. Front to back it's going to give us a step depth of pretty close to 6 and a half inches deep. Now when it comes to the drop or rise that's simply measuring the distance between the platforms of the steps. It's going to give us a drop and rise of about 7 and a half inches. The unit is going to feature a weight capacity of 250 pounds, it's really easy to move to a stowed position as well. I'm just going to remove my support right here.

I'll show you how it folds. What you would do is you would take the step and you would simply just remove it from the mount, from that included bracket, just raise that bar up. It can be removed from the mount, it does rotate for easy installation and removal and then all you have to do is compress the steps together and on the back it's going to have a bracket with a latching mechanism. That's going to engage and that's going too keep the steps in the folded position. That's going to do it for today's look at the Brophy aluminum, scissor steps.


Customer Reviews

Brophy Camper Scissor Steps - 2 Steps - Aluminum - Diamond Tread - 17" Wide - 250 lbs - AS02

Average Customer Rating:  4.8 out of 5 stars   (390 Customer Reviews)

6-1/4" Deep x 17" wide aluminum camper steps expand from 18" to 23" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. Mounting bracket and hardware included.

- AS02
by:

great product, cant wait to install it 436576


Comments
ok, i bought it too small, needs to have one more step, but what can you do
glenn c - 09/26/2018

44048

- AS02
by:

Thanks for the great communication. I did receive the product as described. I actually used this product on my Tacoma truck. I have parents that are old and they need stairs to get into my truck. I tried folding plastic steps but didn't work that well. Not too sturdy. I finally found your product that I thought would work for my use. I thought I needed the different types of mounting bracket, but didn't need it. I just riveted the top arm hinge and rested the top of stair arm on the truck side runners. I also riveted a neoprene pad on the bottom leg to help stabilize the bottom from slipping. It works great for what I needed it to do. Here are some pictures. 122537


Comments
How did this set of stairs fold up and store? On this truck it looks like they would be sticking out in folded position, if the door was closed.I need this for my Class C RV. Its not very high off the ground and 1 or 2 steps should do it. I have to measure it when I get back home. My assumption is that they would fold up and store underneath the RV like the present dented steel ones are storing or stored before they dented up.Please add some measurements of height when folded up.Thanks!
-- comment by: Minerva - 04/03/2014

3392

This particular set does not permanently hang underneath the RV. There is a bracket that attaches to the frame of the RV. When you arrive at the campsite, you pull out the stairs, unfold and set them into the bracket. When it's time to go, you remove the steps, fold them up and store them in the RV. The steps that stay underneath are Pull-Out and Electric Steps. I have added links to these categories below.

-- Patrick B - 4/4/2014


- AS02
by:

Summary: Excellent quality. Purchased for weight saving (60 lbs) and reduced drag (1 sq. ft. side of steps supplied with trailer {large wind drag} eliminated). Our GMC Acadia and KZ Escape car/trailer combination is weight and horsepower sensitive, but my wife didn't want to drive a "growly" diesel truck for daily trips. The GMC is 5000 lb towing max with a 6 cyl gas engine. We were a bit surprised by the 80 lb. steel steps which came with the trailer and I noticed that the side facing the headwind was a square foot in area which was probably causing significant drag. So we purchased the etrailer steps. They are 12 pounds and have no wind resistance. With these steps we have noticed better speed response and better hill climbing. Note: I should have purchased the 3 step unit instead of the 2 step unit. I failed to account for non-level campsites which can increase the total step height required when the trailer is leveled (ground/front/low). So notice in the photo, I changed the mounting, placing the "on trailer" bracket on the bottom of the trailer, and putting screws into the stair tops to eliminate the stair top swivel. Overall: I highly recommend. Don't discount the weight and drag of the "standard" trailer steps. 468703



- AS02
by:

I have an enclosed patio with a raised (~23") deck built on a concrete slab. Occasionally I need to access the patio via the fence gate. These steps provide an excellent solution for outside patio entry as they can be easily removed and installed when required. They do not encroach on the patio area. They can be stored in the garage for winter. They are light weight but strong. 672916



- AS02
by:

Worked perfect for my application. 655374



- AS02
by:

I received the steps yesterday and installed this morning (took less than an hour) on our 2019 Rockwood 2503S (back door). I like the steps, especially the fact that they can be removed while traveling. Our previous steps were badly damage when we hit a "humped" railroad crossing. I do have a few comments though: 1. The two step unit is only available in 18" wide. A 24" wide unit would have worked much better for us. 2. Lag bolts are provided for screwing the mounting bracket to the space below the door. The way travel trailers are built nowadays, I seriously doubt if there is anything there to screw into. I mounted a piece of 2x2 aluminum angle to the frame below the door (used the mounting bolts from the original steps) then bolted the step support bracket to that using four 1/4"x1" bolts, flat washers and locknuts. 3. As other reviewers have noted, the edges of the steps themselves a quite sharp. A little filing/sanding wouldn't be amiss. 642947



- AS02
by:

These steps are great, and were delivered in 2 days. can't ask for much more than that! Needed these for when my pickup camper is off the truck and lowered all the way down. Very sturdy and well made 564846



- AS02
by:

The screws that come with the steps and that are supposed to fit into a 5/32" hole in the frame did not fit. The first screw broke in two while screwed into the pre-drilled 5/32" hole, according to the instructions. Even, a larger hole, 3/16", did not accommodate the screws. Ultimately I decided to drill 1/4" holes and fit machine screws with nylon hex jam nuts. The ideal position for the step support bracket was impossible to use as frame bolts were in its place. The Camper that the steps went on is a Winnebago Minnie Drop, factory equipped with a one step ladder that is too high for us, so we opted for this two step ladder. Finally I got it all to fit but it took much effort and some creativity. The steps are fine but the attachment to the camper leaves much to be desired. 538655


Comments
fine
Richard L - 07/06/2019

57482

- AS02
by:

I won’t be able to put this on my camper until it thaws out in April....but it is a great product as we had an identical one on our last truck camper and it was fantastic, convenient, easy to handle and sturdy. We could just pop it on and off as needed. I took the factory supplied step arrangement off our new Lance and will install this instead. It is soooo much better. 476516



- AS02
by:

Knocked the steel stairs under our truck camper off twice driving on rough terrain, then bought these stairs; they don’t hang down, 10x lighter, and don’t rust. I will never use steel stairs again. They install in less than 10 min and work great. 451673



- AS02
by:

We ordered the bracket with three aluminum stairs for our Teardrop Camper. They came quickly and were exactly as we needed and had been shown on the website. But our bracket was slightly bent and we feared that the "wiggle' was a little too much. We emailed trainer and got a reply within the same day. The customer service was EXCELLENT! Everyone that handled our return and resend was professional, prompt and totally understanding. No questions asked. I would certainly buy from them again in the future. 408981


Comments
We love the stairs. Haven’t taken the camper out much due to some other things happening but would recommend them to anyone interested in a removable stair for a camper. Best set up, we think. Your site was great and we appreciated your help.
MichelleG - 07/23/2018

41387

- AS02
by:

Easy install, good heavy mounting bracket. Steps are sturdy, quality product. 408939



- AS02
by:

Does a great job on my car trailer. The closed position catch is too stiff, and not made of spring material, so is not useful. That's the only thing keeping it from a 5-star rating. 381688



- AS02
by:

The steps are beautiful and they are installed. We will enjoy them very much as an aid to entering our truck camper. They are sturdy, much nicer than the ones we have had before. They are just like described. 377566



- AS02
by:

Excellent product, very easy to install,works great 358311



- AS02
by:

I must say that this product is very well made. These steps solved my problem...now have 3 even steps to enter trailer. 340729



- AS02
by:

Works well, easy to store. 323603



- AS02
by:

I use these on my work trailer everyday, myself and my clients have had no issues getting into the trailer. Great Product!! 259557



- AS02
by:

The steps were delivered on time and were just what was advertised. Install was easy would recomend to a friend. 213504



- AS02
by:

Very well made. Have not used it yet but anticipate no problems. MJW 201157



- AS02
by:

These steps worked very well in my application. Needed 2 steps to get into the boat from the dock and found these steps to be very stable. Purchase a extra mounting bracket, so the steps can be mounted on either side of the boat, depending which side the dock is on. The steps also close down when not in use, so the can be stored out of the way when not needed. The mounting bracket is very strong and will hold the steps from moving. The only reason I didn't give them a excellent rating is because the lower edge of the aluminum steps were left very sharp and should have been filed or rounded off from the factory. I was made awake of this from another review and was prepared to file the sharp edge round. The manufactures should read these reviews and address these concerns. 186847



- AS02
by:

Good solid piece. Wish I had ordered it years ago. 185487



- AS02
by:

The steps were easy to install; they work great.Delivery time was very fast.Im very satisfied. 177910



- AS02
by:

Etrailers customer service and products are always top notch! Very happy with the quality of the steps. Easy process overall. 171494



- AS02
by:

Very well built and arrived quickly. Just what I wanted. 152787


31
416
Show More Reviews

Ask the Experts about this Brophy RV and Camper Steps

  • What is Weight Difference Between Brophy Scissor Steps AS02 and SS02
    The shipping weight difference is that the # SS02 weighs 20 lbs and the # AS02 weighs 12 lbs.
    view full answer...
  • Will Brophy Aluminum Scissor Steps, # AS24, Work On Boat Trailer
    The Brophy Aluminum Scissor Steps, # AS24, fully extended is 39 inches tall and can be slightly compressed to 31 inches. If you are mounting the bracket to your boat trailer, you should measure from where the bracket will mount on the trailer down to the ground to see if these dimensions will work. If after you measure, you need a different size we do have other sizes available in the scissor steps. The Brophy, # AS02, has a extended height of 18 inches to 23 inches, the Brophy, # AS23,...
    view full answer...
  • Recommended Step for 2015 Minnie Winne 31K
    For your 2015 Minne Winne 31K, I recommend the Brophy Camper Scissor Steps - 2 Steps - Aluminum - Diamond Tread - 18" Wide - 250 lbs # AS02. These steps make it easy to remove when not in use and keep all your ground clearance for driving. Another option is to use the Safety Step Adjustable Height, Folding Platform Step - Aluminum - 24" x 16" - 1,000 lbs # SASXLA-09C-G which gives you adjustability for uneven ground and foldable legs. The legs collapse for a storage height of 4 inches....
    view full answer...
  • Steps for a Low Entry Height of Less than 21-1/2 inches On a 2017 Grand Design 29RS
    For such a low "entry height" you will actually need to use scissor steps such as # AS02 since there isn't a SolidStep option that will work. These scissor steps will work with an entry height of 18 to 23 inches. I have included a link to a video review for you to take a look at so you can determine if this type of step will work for you.
    view full answer...
  • Availability of Higher Capacity 24 Inch Pull Out RV Steps
    There sure is! Take a look at the Stromberg Carlson Flexco Manual Pull-Out Steps, part # SMFP-2100. The 2 step unit is 26-1/8 inches wide and has a 350 lb weight rating. The steps are also manufactured in the USA.
    view full answer...
  • Recommended Scissor Steps for Varying Distance From Door to Ground
    I took a look at each of the scissor steps we carry and there are not any available that have the range of 18" to 26" you are looking for. You are not going to want to use the Brophy Camper Scissor Steps # AS23, which have a range of 24" to 30" when your door is 18" off the ground so your best option would be to use both the # AS23 steps as well as the Brophy # AS02 which have a height range of 18" to 23". I've added a link to video reviews of both steps for you to take a look at.
    view full answer...
  • Why are Brophy Aluminum Scissor Steps # AS23 Not Suitable for Permanent Installation
    Brophy does not recommend their Aluminum Scissor Steps # AS23 for permanent installation due to their height when retracted. Even when fully retracted the steps will have a height of 10-1/2-inches which could present a hazard. Their other steps that you referenced, part # AS02, extend down only 7-inches when retracted. Also, the # AS23 Aluminum Scissor Steps have nothing to hold them in place while travelling.
    view full answer...
  • Do the Aluminum 2-Step Scissor Steps Come with a Mounting Bracket
    The mounting bracket is built into the aluminum scissor steps # AS02 so you would not need to purchase a separate bracket. It also includes the mounting hardware.
    view full answer...
  • Replacement 2-Step Stair Assembly for Allegro RV
    We offer many types and sizes of RV pull-out steps. Most of the OEM steps installed by RV makers are standard off-the-shelf items that are easily replaced but given the RV's age you may need to select an alternate step and drill some new mounting holes. The linked page displays all 2-step stair assemblies. Do note that some, such as Brophy # AS02 and # SS02, are NOT meant for permanent installation. These steps use a bracket that holds the step when you are at your destination but they...
    view full answer...

Do you have a question about this RV and Camper Step?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv and camper steps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper step information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Sarah W
Updated by:
Jacob W
Updated by:
Amanda M
Updated by:
Halie H
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.