Fitment of Brophy Camper Scissor Steps for Truck Campers

Question

Question:

Will it fit my rig? I have a 2009 Toyota Tundra with a 2001 north star TC-800, will the AS04 fit that combo?

asked by: Steve S

1

Helpful Expert Reply:

The Brophy Camper Scissor Steps for truck campers, # AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points and chart.

expert reply by: Michael R

1

AS04_001
(click to enlarge)

Chart_
(click to enlarge)

Answer 1

I went to the warehouse and took a measurement of the Brophy Camper Scissor Steps, part #AS05 for you. The distance form the top mounting bracket to the front of the lowest step is 39-1/4 inches. The distance form the frame below the lowest step is…

view full answer...

Answer 2

Hello Todd, Nice job upgrading your setup with the SEAFLO #SE57FR pump and the #SE38FR accumulator, that’s a solid combo. The accumulator tank comes pre-charged to about 10 psi from the factory, but it’s really important to check and adjust that…

view full answer...

Answer 3

Hey Al! We do have some other steps that carry a lower cost for your 2018 Host Mammoth camper but the right fit depends on your entry height. The closest thing to the TorkLift GlowStep Revolution Scissor Steps #TLA8105 you looked at would be the…

view full answer...

Answer 4

The Brophy Camper Scissor Steps #AS04 actually come with a bracket for you to mount on your pickup. It allows you to easily install the steps when you reach your destination and then remove them before heading out! If you would like to add a handrail…

view full answer...

Answer 5

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

view full answer...

Answer 6

We can set you up with new steps so that you love your whole camper setup, steps included. Based on the information you provided, I recommend taking a look at the Brophy Camper Scissor Steps #AS25. This is a 5-step assembly that can expand to between…

view full answer...

Answer 7

That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as…

view full answer...

Answer 8

Hi Mark, I don't have any database to confirm for you if the MORryde Safe-T-Rail Telescoping RV Hand Rail part #MR54BR will fit your Forest River IBEX 19QBS. However, the handle may fit if your trailer meets certain standards the handle requires…

view full answer...

Answer 9

Hey Patrick! The Brophy Camper Scissor Steps #AS25 have the most steps with 5 steps. How long do you need them to be? At the full 48" height the steps will stick out 46" from the mounting bracket. These are designed for a 40"–48"…

view full answer...

Answer 10

We sure do Bruce and welcome back! The Curt V-5 S0700U-R2 receiver is our Ball Mount item #D-26. The Curt item #D-26 is a 2" ball mount with a 7,500 lbs towing capacity. It provides a 3/4" rise, a 2" drop, and has a 1" diameter…

view full answer...

Answer 11

Hey Tony, if you are wanting additional suspension support and are concerned about ride quality at all the best solution is the Roadactive Suspension Kit part #RAS3611-SLHD as this is only option that will give the additional support you are looking…

view full answer...

Fitment of Brophy Camper Scissor Steps for Truck Campers

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching