This stylish, aerodynamic Yakima roof rack gives you the space to carry gear on your vehicle. Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs on your vehicle's naked roof. Great Prices for the best roof rack from Yakima. Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Silver - Qty 2 part number Y53KB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (85928)
Q & A (0)
Related Parts
Photos
Yakima Roof Rack
- Y53KB
Highlights
Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
Complete Roof Rack System: Includes 2 JetStream crossbars, 4 BaseLine towers, and a custom fit kit for your vehicle.
Ready for Gear and Accessories: Works with most universal cargo, water, snow, and bike carriers using top channels or clamps.
Quieter Highway Drives: Aero-style aluminum bars with push-down rubber strips help reduce wind noise and vibration.
Strong and Lightweight Build: Aluminum construction supports up to 165 lbs while resisting corrosion.
Added Security Option: Compatible with Yakima Same Key System (SKS) lock cores (sold separately) to deter theft.
Features to know about
Carry More Without Compromise: Complete Roof Rack System
This setup gives you everything you need to start hauling right away. The system includes 2 JetStream crossbars, 4 BaseLine towers, and a custom fit kit designed for a secure, stable mount. Whether you’re loading up kayaks, a cargo box, or camping gear, the sturdy aluminum construction supports up to 165 lbs while keeping weight low. It’s a straightforward way to expand your carrying space without adding bulk.
Cut Through the Wind: Aerodynamic JetStream Bars with Noise-Reducing Strips
Long drives are a lot more enjoyable when you don’t have to listen to constant wind noise. The aero-style JetStream crossbars are shaped to reduce drag and vibration as air moves over them. Rubber strips fill the top channels and press down around your mounts, helping quiet airflow and cutting down on whistling. The result is a smoother, quieter ride on highways and backroads alike.
Load Accessories Without Hassle: Push-Down Channel Strips—No Cutting Needed
Some racks require trimming rubber inserts before you can mount your gear. These don’t. The push-down rubber strips in the top channels let you press your hardware directly into place without removing or cutting anything. Once installed, the strips close back around the mounts to keep things sealed and neat. It’s a simple design that saves time and keeps your setup clean for swapping between accessories.
Ready for Every Adventure: Works with Most Cargo, Water, Snow, and Bike Carriers
From weekend paddle trips to ski getaways or road-trip storage needs, these crossbars handle it all. They’re compatible with most universal carriers that mount in the top channels or clamp around the bars. That versatility means you can keep using your favorite gear setups—kayak cradles, boxes, or bike racks—without needing separate systems for each activity.
Lock It Down When You Want: Optional SKS Lock Cores
You can add Yakima Same Key System (SKS) lock cores (sold separately) to help deter theft of the rack when parked overnight or at trailheads. It’s an easy upgrade that adds peace of mind when your vehicle is loaded up for the next trip.
Specs
Dimensions
Crossbar dimensions: 50" long x 2-3/4" wide x 1-1/8" tall
Top channel dimensions: 7/8" wide x 7/16" tall x 7/16" opening
WARNING: This product may contain Phthalates and Antimony Oxide which are known to the State of California to cause cancer. For more information, visitwww.p65warnings.ca.gov
Customers Who Purchased This Roof Rack Also Bought...
High quality and all. But my old Yakima rack setup stayed together. The cover was part of a lever to tighten clips. The clips were captured in the assembly. New design the cover and clips need to be completely removed. Need a torque Allen wrench to install every time. Loose parts become Easter egg hunts. Am sure this is to sailer proof mount--that truly is impossible! 3637513
by:
Albert
01/29/2025
2024
Ford
F-250 Super Duty
It arrived just fine, and timely. Thank you, e trailer has always had great customer service 3256720
Albert
1/30/2026
It continues to work just fine. The customer service st etrailer has always been exceptional
by:
Mark
07/31/2025
The rack has performed very well. I have carried a 100 lbs spare tire for over 6k miles across the country. On numerous 4wd roads and the rack has never shifted or marred my roof when removed. The only annoying issue is rubber pads doesn't clip in a better positive fashion when installing or during removal. 3381305
by:
MB
07/12/2021
2019
Ford
Ranger
The 50” jetstream cross bars were perfect for my 2019 Ford Ranger with my ARE cap. They are paired with the Yakima Skyline towers and appropriate landing pads (protip: call etrailer when you order to ensure you have the correct setup;)
These cross bars are SILENT on my cap. Zero wind noise. My daughter and I installed them on a Friday (I do recommend watching etrailer’s installation video in addition to the paper instructions) and left for a 700 mile weekend road trip the next day to pick up a kayak, paddle with friends downstate then drop her off at summer camp.
Even with empty Yakima Jaylows on top, no wind noise. Even with a boat in the Jaylows, no wind noise.
These are the sweetest rack’s I’ve had. With the Skyline towers and landing pads, they are also easy to take off and put on. Click click done.
They look good, too;)
etrailer customer service for the win, too. When I originally ordered, I did not order all the items I needed for installation. When I realized this, I called and they got me squared away. 3027193
I’m using these towers in conjunction with the JetStream cross bars. Assembly and setup was easy, all the tools you need are provided, except perhaps a tape measure for mounting. Looks and feels solid and well made. This is my second set of Yakima towers and cross bars. I plan to use this setup for an old roof top hard shell case and for my mountain bike to get to the trail head.
After completing the installation I took it out for a spin to check for wind noise at highway speeds. No discernible noise, I’m very happy about that as I really don’t want to remove these when not needed. For reference these are mounted on a 2019 Subaru Forester Touring with factory raised rails. Plenty of clearance for attaching equipment and gear.
Side note: the gentleman that assisted me on the phone while ordering was very pleasant and helpful, got me the right products very quickly as I was in a time crunch. Two thumbs up! 3027186
Great product haven’t had any issues with it. Would highly recommend that anyone that’s looking for a roof rack system and a great seller at etrailer 3270966
Brooke M.
2/26/2025
Thanks, Eric! Glad the crossbars have been working well for you :)
by:
Todd
06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer. 3027299
Great product - very good quality. I liked the fact that I could keep the risers mounted on my car, but could remove the cross bars. It took me awhile to install - but I'm not very mechanically inclined. 3027180
etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit)
One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes.
Used in rain at least once, (sustained 60mph), with no leaks. 3027177
by:
Kyle
10/23/2024
Great UX for finding the options matching my car, and the baseline towers work great. Simple straightforward site, will plan to use them again when needed.
For those also buying crossbars for cars without roof rails, recommend taking a silver sharpie and marking the placement of the crossbars on the weather seal at the top of the door openings. Makes putting them back on way less of a hassle if you don’t want them on 24/7. 3220931
by:
Beyhan A.
02/21/2019
2018
Honda
Ridgeline
I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The Yakima crossbars, along with the RidgeLine Towers and the the vehicle specific kit worked great. The installation (10-15 min) is super easy. They look cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing them is also super easy (10 min tops). Highly recommend. 3027184
by:
Mike
06/20/2018
2017
Ford
Edge
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process.3027209
by:
Earl
07/28/2022
Volvo
Cross Country
Yakima towers and crossbars were solid and easy to install with the very well written instructions. We used them on 2 cross country trips with any loosening. They were easy to remove. We plan to use them again as the need arises. 3027211
by:
Bruce
06/12/2019
I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again. 3027182
by:
Ed
06/24/2020
All aspects of the purchase and installation were great. Based on the information provided on the etrailer.com website, I had a high level of confidence that I was purchasing the correct product(s) for my vehicle. The installation was relatively simple and straightforward and the rack is rock solid on my roof. It appears that I did a great job of following the directions :)
3027200
by:
Dave
02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!! 3027225
by:
TimN
03/19/2024
Chevrolet
Silverado
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails. 3027289
by:
Phillip
09/29/2021
Because of the 'rona-induced supply chain interruptions, I was unable to purchase all of my Yakima components from etrailer, but I did get these, and they are typically excellent Yakima components. Well-made, easy to install, good directions, no problems. 3027175
by:
Douglas
10/11/2022
Good condition quality. Good and detailed instructions but aittle tedious install. 3027179
I have a Buick Envision and it seemed as if it would be difficult to get the correct rack, but it turned out to be easy. I entered my vehicle info and was directed to the Yakima Skyline with flush rails. It was easy to install and they look great. I will be able to take my canoe out with no problem! Joe 3027183
by:
Bob E
06/07/2017
Great product, easy to install, very happy with etrailers shipping. 3027204
by:
Ken L
04/03/2017
Dealing with etrailer has been very easy. The first roof rack was incorrect and they worked with us immediately to get it resolved. In hindsight I am glad as the Yakima is a much better quality and works great with our car.
Thanks! 3027201
by:
Tricia
09/08/2018
2016
Honda
Accord
Awesome experience and product! It shipped fast and was easy to install using the directions and a recommended video. Plus, it looks super hot attached to my white Honda Accord Coupe 2016. (I leave it on all year round.) Love it and etrailer!! 3027174
by:
Richard R
02/20/2023
GMC
Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid. 3027301
Great choice Peter, that combo works very well together!
Since you already have 60" Yakima JetStream crossbars # Y00428 and a Thule Hullavator # TH898 , you’re most of the way there. The key now is just getting the correct tower and fit kit for your 2026 Highlander roof type.
If the Highlander has "Flush Rails" this is the correct fit kit
# Y53TR Yakima SkyLine Roof Rack Towers for JetStream Crossbars - Qty 4
# Y66VR Yakima Landing Pad 28
If the Highlander has "No Rails" this is the... view full answer...
The Replacement Adapter and Seat # 8880637 is designed for Yakima JetStream bars but we do have a review showing them being used with Thule WingBars so it does look like they will physically fit together. With that being said, I recommend sticking with Yakima products just because if you do happen to experience any faults with the system (which there shouldn't be any) it would be a lot easier to work with Yakima or Thule if you can show that you're using the product as intended and you... view full answer...
Hey Malia,
It's really simple, because all you need to attach the Yakima JetStream Crossbars # Y00428 to the raised side rails on your 2024 Subaru Crosstrek are the TimberLine towers, with the correct part number being the following:
- TimberLine Towers for Yakima Crossbars # Y33TR view full answer...
Hi Patrick,
Yakima's JetStream crossbars can be installed on your 2024 Hyundai Palisade but you'll need the following components in order to do so:
RidgeLine Towers for Yakima Crossbars - Qty 4 # Y00145
RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Towers # Y89FR
Yakima recommends their 50" JetStream crossbars # Y00425 (black) & # Y00428 (silver) for your vehicle. Yakima's crossbars do have a mounting channel running the full length of the bar so you could go larger if you want,... view full answer...
Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts:
Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428
SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach to your... view full answer...
Sure can; I checked with Yakima and the correct parts for a Yakima roof rack on your 2024 Subaru Outback Wilderness are the following:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- TimberLine Towers for Yakima Crossbars # Y33TR
I also recommend protecting your investment by adding locks to secure the rack; you can do this with the Yakima Same Key System (SKS) Lock Cores # Y07204. view full answer...
The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the... view full answer...
If the clamp brackets of the Thule Pro Ride XT part # TH598004 will not fit around your Core bars you'd have to replace them with Jetstream bars like the part # Y00425 for black or # Y00428 for silver. Thule does not offer any adapter solutions for this bike rack.
Yes it is okay to lubricate the arm of the rack as well. view full answer...
From what I can find in the online owner's manual Subaru just doesn't want you exceeding 150lbs with the factory crossbars, which is same capacity for the Malone FoldAway-5 Kayak, Canoe, and SUP Roof Rack # MAL38FR that you were looking at.
They aren't really descriptive with the shape or dimensions of the factory crossbars so you'll want to ensure that they fall within the requirements of the # MAL38FR, which I have pictured below.
If your crossbars fall outside of these requirements... view full answer...
For your 2020 Jeep Grand Cherokee with black/chrome flush factory rails, I recommend installing the reliable
Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 # Y00428. In order to install these, you will also need Towers # Y53TR and Landing Pads # Y00244. The weight capacity is 165lbs, but you will want to verify that your vehicle roof can handle that much weight (owner's manual).
As far as the cargo box, you will be able to accommodate the largest size we offer and still... view full answer...
I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof.
I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack... view full answer...
I'm glad you want to stick with Yakima since it is what I would have recommended regardless. For your 2024 RAV4 with flush rails I recommend the Yakima JetStream roof rack. You will need the following:
-Yakima JetStream Crossbars # Y00425 (black) OR # Y00428 (silver)
-SkyLine Towers for Yakima Crossbars # Y53TR
-Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR
-Yakima Same Key System Lock Cores (QTY 6) # Y07206 for the rack and ShowDown OR # Y07204 for just the rack.
The... view full answer...
Yes, a roof rack can be installed a 2024 Toyota Sienna. The easiest way is if yours has the raised rails on the top of your roof. If your 2024 Sienna has raised roof rails, I recommend the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver
TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR
This aero bar roof rack system has a 165 lbs... view full answer...
The best roof rack for your 2024 Toyota Corolla Cross with a bare roof is from Yakima, and consists of the following part numbers:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- BaseLine Towers # Y28TR
- BaseClip Fit Kit # Y06153
- BaseClip Fit Kit # Y06154
I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the... view full answer...
The best roof rack for your 2024 Subaru Impreza hatchback with a naked roof is from Yakima due to how quiet it is as well as its durability. The roof rack that fits your Impreza is made up of the following parts:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- SightLine Towers for Yakima Crossbars # Y64AR
- Landing Pad 22 for Yakima Towers # Y00248
The JetStream bars are quiet because have what are called "WindRidges" on top that control the flow of the air both over... view full answer...
Hi Chris; we do in fact have a roof rack fit for your 2024 Chevy Blazer EV, so long as your Blazer has flush-mounted rails to attach the feet to. The rack is from Yakima, and I verified this fit directly with them for you. The parts that make up the rack for your Blazer are the following:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- SkyLine Towers for Yakima Crossbars # Y53TR
- Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245
This is an exceptionally... view full answer...
Congrats on the new vehicle! To add a Yakima roof rack to your 2024 Cadillac XT4 with flush rails you will need the following parts:
Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 item # Y00421 or item # Y00428 for silver crossbars
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails - Qty 4 item # Y53TR
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
I recommend adding the Yakima Same Key System item # Y07204 to help prevent... view full answer...
I would tell them they could do it and not to bother with spending money to go to a mechanic or the dealer. Do you have a measuring tape of some sort? If so, that's it regarding the needed tools to install the Yakima rack on your 2013 Toyota Prius. So no tools are needed, it's light as a feather, and all you have to do is some measuring to get it installed.
I am 1000% confident this is something you can do on on your own in about 30 minutes without any assistance. The correct fit for the... view full answer...
Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails.
Bare Roof
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- BaseLine Towers # Y28TR
- BaseClip Fit Kit # Y06163... view full answer...
By cross rails I believe you are referring to a roof rack, and we do have a fit for a roof rack on your 2023 Cadillac XT4, from Yakima. The rack consists of the following parts:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- SkyLine Towers for Yakima Crossbars # Y53TR
- Landing Pad 19 # Y00245
This rack will not only fit your '23 XT4, it will provide it with a quietest, durable, easy-to-use roof rack that also looks great. The rack is quiet because it has "WindRidges"... view full answer...
The Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 5 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack:
Thule
- Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220
- Evo Flush Rail Feet for Thule Crossbars # TH710601
- Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE
- (Optional): Thule One-Key System Lock Cylinders # TH450400
Yakima
- Yakima JetStream Crossbars - Silver... view full answer...
Your kayaks will fit the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD, but two of them will not fit your 2019 Subaru Outback's factory roof rack because the crossbars simply are not long enough for both the carriers and your 30" wide kayaks. So to use a kayak carrier you'll need an aftermarket roof rack, and the verified fit to replace the roof rack on your 2019 Outback is from Yakima, and consists of the following part numbers:
- Yakima JetStream Crossbars - Silver # Y00428... view full answer...
Yes, the Yakima SkyBox 21 Rooftop Cargo Box # Y07337 will fit your Outback as long as you have round, square, aero, elliptical, or factory crossbars.
If you don't have any bars, you'd just need to add a set like the Yakima JetStream Crossbars # Y00428 with the TimberLine Towers for Yakima Crossbars # Y33TR and you'd be good to go. view full answer...
To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR
This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same... view full answer...
Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord.
If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference. view full answer...
Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise.
Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well. view full answer...
Hey, Nick!
Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle.
I... view full answer...
According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for.
If you determine that you have fixed mounting points, I recommend the following setup:
- Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #... view full answer...
There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way.
I've... view full answer...
As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch.
In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit... view full answer...
There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails.
I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof.
The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for... view full answer...
There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof.
The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists... view full answer...
Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well.
As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends... view full answer...
Great choice Peter, that combo works very well together!
Since you already have 60" Yakima JetStream crossbars # Y00428 and a Thule Hullavator # TH898 , you’re most of the way there. The key now is just getting the correct tower and fit kit for your 2026 Highlander roof type.
If the Highlander has "Flush Rails" this is the correct fit kit
# Y53TR Yakima SkyLine Roof Rack Towers for JetStream Crossbars - Qty 4
# Y66VR Yakima Landing Pad 28
If the Highlander has "No Rails" this is the... view full answer...
In order to determine the compatibility of either the Thule Motion XT XL # TH629806 or the Thule Motion XT XXL # TH629906, it truly depends on if you have a bare roof, raised rails, or a factory roof rack currently installed. The reason why this matters is because not only do crossbars come with different heights and widths, but your roof has different available length based on what roof setup you have. The roof setup is important in determining if you can fully open the rear hatch of your... view full answer...
Hi Hamza,
Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components:
Yakima JetStream Crossbars # Y00425
BaseLine... view full answer...
Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199.
Then for a square bar roof rack the Thule Portage part # TH819 would work great. view full answer...
For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel. view full answer...
I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts:
- Yakima JetStream Crossbars - Aluminum... view full answer...
The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack.
The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius... view full answer...
Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure.
If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185.
You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350.
If you can tell... view full answer...
Hi Tom! I just got to this one so I'm guessing you're going with the Thule Hullavator Pro # TH898 for your setup. I don't have the exact measurement for the 60" bars but it looks like it is too close to call. It will be 4-8" on the top. The 70" bar setup would be best, and it won't be too wide for your truck. Once again you will need the following:
-BaseLine Towers for Yakima Crossbars # Y28TR
-BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185
-Yakima JetStream Crossbars... view full answer...
Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts:
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item... view full answer...
For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA
Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427
The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs.... view full answer...
Hello Zeke,
So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts:
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit # Y06188
- BaseClip... view full answer...
The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip... view full answer...
While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle.
If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll... view full answer...
The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan.
I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and... view full answer...
Almost certainly, yes.
You did not specify which Thule rooftop box you have, but a fit should not be an issue due to the small 3-1/8" wide x 1" tall JetStream aero bars.
The roof rack you are talking about for your 2017 Ford Edge is made up of BaseLine Towers # Y28TR, Fit Kits # Y06102 and # Y06139 as well as the JetStream Crossbars # Y00425 and will have a spread of 32 inches when installed on your Edge.
I do recommend using the Yakima SKS Lock Cores # Y07204 to secure the rack to... view full answer...
We do have some great roof racks that fit your 2016 Lincoln MKX with a panoramic moon roof with no rails. For the best system, I recommend the following:
- Yakima JetStream Crossbars - Aluminum - Black - 60" # Y00426
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06102
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06139
- Yakima Same-Key Lock Cores # Y07204
With the JetStream setup,... view full answer...
We actually do have a selection of roof racks that fit your 2016 Ford Edge with the panoramic roof. I have attached a link to our selection for you to filter through, but I'm pretty sure you have the naked roof (no flush mounted rails) so I recommend using the Yakima JetStream roof rack which consists of the following:
60" JetStream Crossbars - Black # Y00426
BaseLine Towers - # Y28TR
Fit Kit - # Y06102
Fit Kit - # Y06139
Yakima actually has pictures showing this installed and the panoramic... view full answer...
We have a variety of roof rack options that fit your 2017 Ford Edge with the glass roof but I really like the Yakima JetStream system because it's fine-tuned to fit your vehicle like a glove and keep the crossbars level with each other. The correct parts will depend on if you have the flush rails or a naked roof.
Flush Rails
50" JetStream Crossbars - # Y00425
SightLine Towers - # Y64AR
SightClip Fit Kit - # Y79AR
Naked Roof
60" JetStream Crossbars - # Y00426
BaseLine Towers - # Y28TR
BaseClip... view full answer...
Yes, you can! To add a roof rack to your 2024 Ford Edge with a glass roof you will need the following parts:
Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y39UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06102
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06139
I have linked an installation video below so you can see how to get this roof rack set up.
This aero bar roof rack system has... view full answer...
I am happy to tell you that we do ship to APO addresses! If you let me know what rack you are interested in or what vehicle you are trying to outfit I'd be happy to help you out. view full answer...
There are roof racks available for 2016 Ford Edges without rails, and they can be installed at home without any special tools.
I recommend Yakima's JetStream bars, which come as a kit that consists of:
Yakima JetStream Crossbars, 50 Inches part # Y00425
Yakima BaseLine Towers, part # Y28TR
Yakima BaseClip #102, part # Y06102
Yakima BaseClip #139, part # Y06139
Make sure to order both BaseClip #102 and BaseClip #139 as they are two separate kits, one for the front and one for the rear.... view full answer...
The 48 inch long Yakima crossbars would be just slightly too short to fit properly on a 2015 Ford Fusion. But what you can do is use the 58 inch bars, # Y00409, and shorten them using a saw with a blade that can cut steel.
What I would do is go ahead and install the roof rack and then mark the bars where I would cut them. You will need some of the bar sticking out each end to fit the end caps on.
The cuts will need to be straight otherwise the end caps will not fit and water could get... view full answer...
We checked with Yakima and their Jetstream roof rack part numbers # Y00425, # Y28TR, # Y06102, and # Y06139 is a confirmed fit for your 2016 Ford Edge with the panoramic roof. This would be a great option that would fit perfectly so we highly recommend it. view full answer...
I checked with Yakima and the Baseline rack part numbers # Y00421, # Y28TR, # Y06102, and # Y06139 that you referenced is a confirmed fit for the 2016 Ford Edge with a Panoramic Vista Roof. I attached a couple pictures that I got from their fit guide that shows that the smaller feet fit perfectly on the top of the metal of the roof and that is how they are able to fit the rack. view full answer...
For a 2016 or 2015 Ford Edge with the panoramic sunroof and no factory rails I recommend the Yakima system with the JetStream Crossbars. This consists of the 50 inch JetStream Crossbars # Y00425, the BaseLine Towers # Y28TR, and the BaseClip Fit Kit # Y06102 for the front, and # Y06139 for the rear clips.
The Yakima JetStream crossbars are aerodynamic bars that are extremely quiet, and also help to reduce drag. The noise factor will be the biggest impact because of the sunroof. Using... view full answer...
For your 2018 Ford Edge without the factory side rails and a moonroof I recommend taking a look at the Yakima JetStream roof rack system. This consists of # Y00425 for the two 50 inch long JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06102 for the Front Fit Kit, and # Y06139 for the Rear Fit Kit. This is confirmed to fit the naked roof of your vehicle and will work just fine with the moonroof. It has a 165 pound weight capacity.
I have attached the written installation instructions... view full answer...
There are 2 different clip sets recommended for the 2016 Ford Edge with a Naked Roof because one set of clips is needed for the front while a different set is needed for the rear bar. For the 2016 Edge, the BaseClip 102 # Y06102 will be used to secure the front BaseLine Towers # Y28TR and the BaseClip 139 # Y06139 is needed to secure the rear BaseLine Towers. Yakima lists different clip kits for the front and rear towers in order to achieve a more custom fit for the curve of the vehicle's... view full answer...
The roof rack I recommend for a 2017 Lincoln MKZ is the Yakima JetStream Crossbar System which consist of part # Y00425, part # Y28TR, part # Y06110, and part # Y06102. This is an aero bar system which works great with most wrap-around style rooftop mounted accessories but can also be used with channel mounted accessories due to the integrated channels. The aero bar design also makes for the least amount of wind noise and best possible mpg's.
Please note, modes with panoramic roofs are... view full answer...
We determine the cross bar length to recommend based on the manufacturer's research and testing.
Yakima produces a lot of watersport and snow sport accessories, and their load assist models require that the ends of the crossbars overhang the rack feet. So, a lot of their roof crossbars are naturally longer to provide for this length as an added feature so the user doesn't have to think about how to mount the crossbars to clear the side of their vehicle.
Additionally, this increases the... view full answer...
For your 2017 Ford Edge with the glass roof I recommend going with the Yakima JetStream roof rack. This includes the 50" JetStream Crossbars # Y00425 along with the BaseLine Towers # Y28TR, and Fit Kit # Y06102. To lock this roof rack you will also need the SKS Lock Cores # Y07204. This system has a weight capacity of 165 lbs.
The Yakima JayLow Kayak Carrier # Y04073 is one of our most popular carriers that will leave enough room on your roof for you to add another accessory if necessary.... view full answer...
The Yakima JetStream Roof Rack part numbers # Y00426, # Y28TR, # Y06102, and # Y06139 would be the most modern roof rack we offer for your 2018 Ford Edge with the totally naked glass roof. It's aerodynamically the best designed crossbar which makes it the quietest and also has a top channel you can attach accessories in that were designed for that type of attachment.
I attached a picture of this rack installed on a similar Ford Edge as well as a link to an install video. For a kayak carrier... view full answer...
Yes, if you filter through our fitguide system for your 2019 Lincoln MKZ you'll see what roof rack options will fit your vehicle. While we do have a roof rack fit for your 2019 MKZ, the SportRack Semi-Custom Roof Rack for Naked Roofs # SR1003 does not fall into that category. In fact, it looks like SportRack doesn't have this listed as a fit for any Lincoln model out there.
For your application I recommend checking out the Yakima CoreBar roof rack as it has a simple yet attractive design... view full answer...
I checked with Yakima, and the correct length of crossbars for your 2016 Ford Edge is 60 inches; the 50 inch length will be too small.
For your '16 Edge with a panoramic glass roof, the Yakima roof rack system that fits is made up of the following parts:
- Yakima JetStream Crossbars # Y00426 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06102
- BaseClip Fit Kit # Y06139
- Same Key System Lock Cores (Optional) # Y07204
I have added links to video reviews... view full answer...
Since your 2018 Ford Edge has a naked roof the type of roof racks we have available use a clamp style that fits into the door jambs. I recommend the Yakima JetStream system. The aero bars do a great job at reducing drag and wind noise. What sets these apart from other aero bars is the SmartFill strips in the t-slots. You don't need to cut the strips to get them to fit around channel mounted accessories. All you do is push down on the strips and slide the accessoy in. The JetStream... view full answer...
Yakima offers roof rack options for your 2016 Ford Edge Sport with Naked Roof & Panoramic Sunroof that you can see on the linked page. I confirmed with my contact at Yakima that these are compatible with the panoramic glass roof on your Edge.
For quiet performance I recommend their Jetstream aerodynamic cross bar rack system. This is made of parts # Y00425, # Y28TR, # Y06102 and # Y06139. This rack has black crossbars.
Please refer to the linked video for more information. I confirmed... view full answer...
It sounds like you are looking for a roof mount cargo box for a 2018 Infiniti Q50. In which case you'll need a roof rack and for this I recommend the Yakima JetStream Crossbar System which is composed of part # Y00425, part # Y28TR, and part # Y06102, and part # Y06109. Then for a roof rack, the Yakima SkyBox NX 16 Roof Cargo Box part # Y95AV is a perfect match. view full answer...
I have a great roof rack recommendation for you!
It's the Yakima HD Crossbars, part # Y01157. These aero-style crossbars are 60" in length, so they will extend past the feet by about 5" on each side. Combine these with the BaseLine Towers, part # Y28TR, and the two BaseClips, part # Y06102 and # Y06139, to complete the roof rack setup. I've linked to a video review of the HD bars for you to look at.
As for the kayaks carriers, there may not be enough room to lay two of them down flat... view full answer...
Yes, we have a few different roof rack systems that will fit your 2015 Ford Edge w/ the glass panoramic roof.
For the popular roof rack I recommend the Rhino-Rack Vortex Aero Rack System, # RRVA137B-2 Vortex bars, # RRRLKVA 2500 Series Legs, and the # DK435 fit kit. This Rhino-Rack system has a 165 lbs capacity and aero bar design make the bars aerodynamic to help reduce wind drag and noise. The Vortex system also has a sleeker low-profile design that is aesthetically pleasing to the... view full answer...
Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure.
If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185.
You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350.
If you can tell... view full answer...
Hi Tom! I just got to this one so I'm guessing you're going with the Thule Hullavator Pro # TH898 for your setup. I don't have the exact measurement for the 60" bars but it looks like it is too close to call. It will be 4-8" on the top. The 70" bar setup would be best, and it won't be too wide for your truck. Once again you will need the following:
-BaseLine Towers for Yakima Crossbars # Y28TR
-BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185
-Yakima JetStream Crossbars... view full answer...
Hello Michael,
I am glad you wrote in, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y27FR that you were looking at is for a Ford F-150.
For your 2019 Ford F-250 (vehicle that was put into the fit guide) you will want to order (2) sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06185.
How did end up with the feet and no pads, did you take them off of an old vehicle? What do you plan on using your roof rack for? view full answer...
We have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following:
- Yakima CoreBar Crossbars # Y00423
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06185
I do recommend considering locks... view full answer...
In 2016, Yakima phased out their Q-Towers and upgraded to their new BaseLine system. That means for vehicles that are model year 2016 or newer, there are no confirmed Q-clip fits for them so we need to get you a new roof rack for your 2021 Ford F-250.
If you want to reuse your round bars to make a roof rack on your F-250 Crew Cab, you can do so with a new BaseLine system. That consists of BaseLine Towers # Y28TR, a RoundBar Adapter # Y03536, and BaseClip Fit Kit # Y06185. view full answer...
We absolutely have roof rack options for your 2021 Ford F250.
Beginning with the roof rack, I'd recommend the Yakima CoreBar roof rack which would be assembled using these parts:
• Yakima 70 inch CoreBar crossbars, part # Y00423
• Yakima BaseLine Towers, part # Y28TR
• Yakima Vehicle-Specific fit kit, part # Y06185
With a 70 inch long crossbar, you'll be able to fit up to 5 bikes on the roof, but keep in mind that the roof rack has a 165 lb weight capacity, so unless your bikes are really... view full answer...
Yes, you can use two of the Thule Hullavator Pro Kayak Roof Rack and Lift Assist # TH898 on the Thule TracRac SR. It has plenty of capacity and space for both to fit, you'll just need to place the towers so that the crossbars are spaced 24" apart. For your 2022 Ford F-250 with a 6-3/4' bed you'll need part # TH43003XT-785 for the TracRac.
The Thule Hullavator requires that the roof of the vehicle can hold at least 130lbs, but you'll be splitting this with the ladder rack. I'd just check... view full answer...
To add a Yakima roof rack to your 2024 Ford F-250 Crew Cab you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06185 view full answer...
For your 2018 Ford F-250 Crew Cab the Yakima Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 would be a great solution as it is a confirmed fit and the fact that it does not permanently modify the roof of the vehicle it is installed on. So you'd be able to take the roof off when it's time to return the lease and no one would know the difference.
The aero shape of these bars also helps cut down on wind noise which is a nice feature as well. I attached an install video for thist... view full answer...
I checked for you and there is a fit for a roof rack for your 2016 Hyundai Elantra GT with the panoramic glass roof (moonroof), which is from Yakima. I verified the fit with the manufacturer and roof rack consists of the following parts:
- Yakima JetStream Crossbars # Y00425 Black
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06151
- BaseClip Fit Kit # Y06185
- Same Key System Lock Cores (Optional) # Y07204
This is going to give your '16 Elantra GT an easy to use,... view full answer...
To do a half roof rack for the roof of your 2023 Ford F-350 you'd need the following:
Yakima JetStream Crossbar part # 8880650
BaseLine Towers for Yakima Crossbars part # Y62TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06185
There isn't a way to do a half ladder rack so best option would be an adjustable height rack like the Yakima Overhaul # Y01151-5855 so that you can have it match the height of your roof rack and if needed you could leave off the rear (or front)... view full answer...
Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4.
Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185.
These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories.
Since you also are looking for a way to transport some kayaks, I'd recommend checking... view full answer...
I have a great no-drilling solution for you. While the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Long # Y01-130B requires drilling, there are options for your 2021 Ford F-250 Super Duty crew cab that do not require any drilling. To go this route, you will need the following parts:
- Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410
- BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR
- RoundBar SL Adapter for Yakima... view full answer...
Okay, we can get your 2018 Ford F-250 Crew Cab set up with the right Yakima roof rack, and let's start with your first question about the correct length bars. That is determined by the manufacturer when they test fit roof racks, which is how we know the correct length of crossbar for your truck are the 70 inch long bars.
In regards to a disadvantage with the clips/clamp-on versus drilled on racks, there is no disadvantage at all. Really, the only reason someone might use a rack that that... view full answer...
While there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185.
If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the... view full answer...
While we do not have a full kit for just one crossbar for your 2020 Ford F-250, I have compiled a list of the individual part numbers that make up the Yakima HD crossbars that are compatible with the SuperCab and CrewCab.
For the crossbar itself, use part # Y95FR. It's the single bar, 60" long like the full kit.
For the BaseLine Towers, use part # Y62TR. There are 2 in this kit.
For the HD Bar SL Adapter, use part # Y03541. This, unfortunately, does not come in a quantity of 2, so you'll... view full answer...
Hey Tom! We don't have a kit but we can put one together here. For a complete rack you will need the following:
-BaseLine Towers for Yakima Crossbars # Y28TR
-BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185
-Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427
Are you still thinking about adding the MOS UpLift or are you going to go a different route with your setup? view full answer...
We have everything you need to secure your bikes on the roof of your 2019 Ford F-350 Crew Cab.
Starting with the roof rack I recommend the Yakima JetStream System. This consists of Black # Y00426 aluminum JetStream Crossbars, the BaseLine Towers # Y28TR, and the BaseClip Fit Kit # Y06185. This will provide you with a really sleek, aerodynamic system for a quiet ride and better fuel efficiency when compared to round or square bar racks.
I have attached a short video demonstration that... view full answer...
The track systems are all pretty much universal so you can use Yakima accessories in Thule tracks or vice versa. In regards to weight, you will be limited to 165 lbs per set of crossbars no matter which system you choose as that is all the mounting feet can handle, even with the Yakima HD Crossbars System. The vehicle's roof would likely not be able to handle much more than this either. However, you can carry up to 330 lbs total but you would need to distribute the weight so that 165 lbs... view full answer...
The Yakima JetStream roof rack part numbers # Y00426, # Y28TR, # Y06185 that fits the 2024 Ford F-350 crew cab is the same as the 2023 models so the instructions are the exact same. So Jack, what that means is that the instructions were printed when the 23' model was the newest but it's definitely the same as the 24' models. view full answer...
For a roof rack for your 2020 Ford F-350 Super Duty that would allow you to carry a lot of bikes you'd want to go with a rack that has a longer crossbar like our Yakima Jetstream Rack # Y00426, # Y28TR, and # Y06185 which is 60 inches long.
Then you could use a roof bike rack like the Yakima HighRoad part # Y02114 which allows you to keep the front wheel installed on the bike. Space-wise you wouldn't be limited on how many bikes you could carry as most likely you'd run out of roof capacity... view full answer...
Hey Ron, congratulations on the new truck! To move your Yakima crossbar over to your new 2026 Ford F-250 you need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 along with the BaseLine Towers # Y62TR. That is a pair of towers, plus a pair of the clips, which will allow you to mount a single bar. The towers are the same so if you still have them you only need the fit kit.
What are you carrying on your F-250? view full answer...
To install 60 inch Yakima JetStream # Y00427 aero-style crossbars on your Ford F-250, you'll need the # Y28TR BaseLine towers and the # Y06185 vehicle-specific fit kit. view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Albert
1/30/2026
It continues to work just fine. The customer service st etrailer has always been exceptional