See what our Experts say about this Lippert Accessories and Parts

• Replacement Landing Gear Motor for 2018 Jayco Eagle HT 29.5BHDS With 1A065012-02-03
  Hey Kim! The Replacement Motor with Clutch for Lippert Ground Control 2.0 Electric Leveling System # LC241795 is the correct replacement motor for your Jayco landing gear. If you take a look at the picture below you can see the same model 1A065012-02-03 on the sticker. Any big trips coming up with your 5th wheel?
  view full answer...
• Replacement Short Leg, Motor, and Gearbox for Lippert Ground Control 2.0
  I have an answer for you. Unfortunately, we do not sell replacement components you need as a complete set. They have to be purchased individually. Although, we do carry all those parts. Here are the replacements you need: - Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Short # LC241844 - Replacement Motor with Clutch for Lippert Ground Control 2.0 Electric Leveling System # LC241795 - Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015
  view full answer...
• Looking For Replacement Landing Gear Motor For 2012 Forest River Stealth RG3210
  Hello Joey, thanks for reaching out. We should have a motor for you, but there is no way to look up a make and model of RV to know exactly what motor is the right replacement. RV manufacturers just do not list that kind of information online. Generally we would need the brand and model number of the current motor. Then we can look up what replaces it. There should be a sticker on your motor that shows this info. Get me that model number and I am happy to look into it and see what we can offer.
  view full answer...
• What is the Difference Between Lippert Landing Gear Motors LC241795 and LC196308
  The two motors are for very different applications. The part # LC241795 is a replacement for the Lippert Ground Control 2.0 system which is an auto leveling landing gear setup and the # LC196308 is for a heavy duty landing gear set. Can you get me any info/part numbers you can find on your Raptor's landing gear? With that I can see if there's a replacement out there.
  view full answer...
• Replacement Leveling System Motor And Gearbox
  Hi Richard, Could you send me some pictures of the motor and any other part numbers listed on the motor or its gear box so I can identify exactly what you have and find a compatible replacement?
  view full answer...
• Recommended Replacement For Atwood Levelegs 66280 On A 2005 Fleetwood Pace Arrow 36D
  As Atwood is no longer produced, I was unable to find much of anything to do with the specifications, unfortunately. With that being said, the best option we will have will be the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. This will have a combined weight capacity of 12,000 pounds and will give you 38" of lift as well. Odds are the mounting brackets will measure differently than what you have, so they will need to be welded on in different spots. I included a diagram of...
  view full answer...
  
• Replacement Motor for Atwood Level Leg System 66280
  You are correct that Atwood was bought out by Lippert, and replacement parts are difficult to come by these days. I spoke to my contact at Lippert and your Atwood 66280 Level Leg system does not have any replacement parts available, so the Replacement Motor # LC241795 will not work as a replacement. He also said that unless you were able to find a reconditioned part from a salvage yard, your only course of action is going to be replacing the entire leveling system. If you can let me know...
  view full answer...
• Lippert 2.0 Ground Control Landing Gear Problem Solution
  You'll need a new jack leg based on what you described. For a replacement you'd want the part # LC241845 for the driver side or part # LC241846 for the lead leg that is normally on the passenger side.
  view full answer...
• Troubleshooting LR Error Code of Lippert Ground Control 3.0
  The LR jack code means your left rear jack leg is not able to be controlled by the computer of the Ground Control 3.0 basically. This can be a hall signal issue (open ground/short, or other malfunction) or an unexpected high amperage current stall (meaning the battery stopped providing power for some reason). You'll want to begin by checking the fuse on the control module # LC304136 for the left rear leg to ensure the fuse isn't blown. From there you'll want to trace the wiring back to...
  view full answer...
  
• Troubleshooting Venture Landing Gear Not Working With Motor Still Working
  If when you say "move by hand" you mean using the hand crank then I believe that your issue is the gearbox. Since you said you can hear the motor # LC241795 working and the landing gear seems to operate normally then you simply need to swap out your gearbox with the Replacement Gearbox # LC276602 and you should be good to go! The only other thing would be that if you can actually move the leg by hand without cranking it then that would mean you need to replace your actual landing gear...
  view full answer...
• Can Other Motors Be Used with the Lippert Components Ground Control 2.0 Electric Leveling System
  I can certainly understand wanting to look for a more cost effective alternative but the motor and gear box for the Lippert Ground Control Leveling Systems are sold as one unit. The correct motor and gear box for your Lippert Ground Control 2.0 Leveling System (Model 1A065012-02-03) is the Replacement Motor with Clutch for Lippert Components Ground Control 2.0 Electric Leveling System part # LC241795. I spoke with Lippert and asked if they had any other more cost effective options but...
  view full answer...
• Tuson Motor Recommendation for Lippert Ground Control 2.0
  Yes, I checked with Lippert and for the Ground Control 2.0 the correct motor is the Tuson motor part # LC241795 that you referenced.
  view full answer...
  
• Troubleshooting and Replacement Motor Options for a Lippert Ground Control 2.0 Leveling System
  That motor is the Replacement Motor with Clutch for Lippert Ground Control 2.0 Electric Leveling System # LC241795. The Lippert Ground Control System was replaced by the 3.0 system. The 3.0 system uses a different style of motor and is not compatible with the 2.0 system. Which means there is not an upgraded motor to increase weight capacity. If this is the original system on your 5th wheel, then it would be properly rated for your 5th wheel and the motor capacity would not be the issue....
  view full answer...
  
• Will Landing Gear Motor LC241795 Fit the Gearbox # LC276602 for Venture Landing Gear
  Yes, the Replacement Motor # LC241795 will fit your Gearbox # LC276602. According to Lippert Components this motor works with the Gearbox # LG-179015 for their Ground Control 2.0 systems. Since the Gearbox # LG-179015 has the same specs as the Gearbox # LC276602, this motor will fit your application.
  view full answer...
• How to Support Trailer When Replacing Landing Gear Motor
  When replacing your landing gear motor like # LC241795, the trailer can be supported by your landing gear legs. You do not need a second set of jacks or jack stands. With the motor removed, the gear box will not turn to allow the legs to drop. I have included a video that shows the installation process for a similar landing gear motor.
  view full answer...
• Replacement Motor and Gearbox for a 2017 Crusader 5th Wheel
  For your 2017 Crusader 5th wheel the correct replacement motor is the Replacement Motor with Clutch for Lippert Ground Control 2.0 Electric Leveling System # LC241795 with the gearbox # LG-179015. This Tuscon brand motor includes a clutch and operates at 5,430 RPM.
  view full answer...
• Replacement Motor With Clutch For a 2016 Forest River Crusader
  If you have the Lippert Ground Control 2.0, then the Replacement Motor with Clutch for Lippert Ground Control 2.0 Electric Leveling System # LC241795 will work for your 2016 Forest River Crusader. I wasn't able to pull up any information with the provided model number, unfortunately. If there is any other notation about your current motor that you can provide, I would be able to confirm that this is a good replacement for you.
  view full answer...
• Lippert Ground Control 2.0 Rear Jack Out of Stroke Error When Jack is Under Load Solution
  "Out of stroke" is supposed to mean that the jack has gone as tall as it can go but it can also mean that there is an unexpected high amp current stall. Since it sounds like your issue is the second reason that would indicate the motor is drawing too much amperage and that would indicate that the motor is bad most likely. The solution would be a new motor like the part # LC241795 that you referenced.
  view full answer...
  
• Replacement Motor With Clutch For Lippert Ground Control 3.0 Electric Leveling System
  The Replacement Motor with Clutch for Lippert Components Ground Control 2.0 Electric Leveling System # LC241795 is the proper motor for your system. Lippert does use the Tuson Brand motor with clutch that operates at 5,430 rpm. I don't have any knowledge of these being refurbished or rebuilt, so I can't help there. It may be a good idea to keep a spare handy if you do a lot of camping and because your system uses 4 motors.
  view full answer...

Do you have a question about this Accessories and Part?