Looking For Replacement Landing Gear Motor For 2012 Forest River Stealth RG3210

Question

Question:

Hey, I have a 2012 forest river Stealth RG3210 5th wheel and im not sure what the landing gear motor is for a replacement. Do you know what my options are for replacement motors? Are there multiple options/brands? Any help is appreciated, thanks.

asked by: Joey B

0

Expert Reply:

Hello Joey, thanks for reaching out. We should have a motor for you, but there is no way to look up a make and model of RV to know exactly what motor is the right replacement. RV manufacturers just do not list that kind of information online.

Generally we would need the brand and model number of the current motor. Then we can look up what replaces it. There should be a sticker on your motor that shows this info. Get me that model number and I am happy to look into it and see what we can offer.

expert reply by: Jesse M

0

Jesse M.

9/26/2025

Hey Joey, did you have a chance to find the model number on your current motor? I'm asking because I want to make sure we can help you find the right replacement for your 5th wheel.

Joey B.

9/27/2025

@JesseM, No the sticker with the model number is gone.

Jesse M.

9/29/2025

@JoeyB Darn! Without that it is tricky to say exactly what will work. We do offer a replacement motor from Stromberg Carlson part # SC68QR that works with several different brands and models of landing gear. It will work with the Stromberg Carlson models LG-3 or LG-4, and well as with landing gear from Venture, Lippert, and Pac-Rim. If you want to compare this to what you have, overall the motor measures 8-1/2" tall x 4" long x 3-3/8" wide. The distance between the mounting holes is 4-1/8" and it has a 5,000 lb weight capacity. Let me know if this matches the current motor.

Answer 1

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 4

We can get you un-stranded! The correct follow leg for your landing gear is going to depend on how long it is. If your leg measures 29-1/2" (see attached photo), you would need replacement #LG-179014, which can be used with most landing gear…

view full answer...

Answer 5

Hi James; the better option would be the Bulldog #BD500162 you were looking at. You can add the Motor and Switch Kit for Stromberg Carlson Landing Gear #LG-217884 to the Bulldog which will give it the same functionality as the #LG-4 while saving you…

view full answer...

Answer 6

You should need repair kit #LG-146059 for the lead leg and #LG-146060 for the follower leg. From the picture you sent in I was able to determine that you have a Venture landing gear set VMC900R.

view full answer...

Answer 7

The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E as…

view full answer...

Answer 8

The 7.00-15LT tires you have on your 1978 Avion trailer have a 29.4" diameter, have a load range that should be in the 2,400 lb vicinity and fit wheels that are 5", 5-1/2" and 6". For comparable tires I recommend going with a…

view full answer...

Answer 9

Hey Thomas, well I know exactly what you are talking about and the correct replacement spring you would want is the EMCO part #TRU52FR which is 25-1/4 inches long and is for a 7k rated axle. Did you break yours or did they wear out?

view full answer...

Answer 10

I sent all of this to my tech contact at LCI to see what they this is the problem and they were able to come up with a way to use the voltage readings to determine where the issue is: There are 4 wires on the harness as follows Black= power (need to…

view full answer...

Answer 11

We have just what you need to replace your landing gear motor M9000PK with the #LC196308 and you'd be set! This is a confirmed fit for what you have and is a faster motor too so your jacks will raise and lower quicker.

view full answer...

Answer 12

Hi Lisa; the Rear View Safety Backup Camera #RVS-611-IR is the same as your RVS-MV3-IR. The RVS-MV3-IR replaced the RVS-611-IR and we retained that part number on our site. It still has a 5-pin connector, see the attached photo.

view full answer...

Looking For Replacement Landing Gear Motor For 2012 Forest River Stealth RG3210

Product Page this Question was Asked From

Continue Researching