1. Accessories and Parts
  2. Stromberg Carlson
  3. Trailer Jack
  4. Camper Jacks
  5. Legs
  6. Follow Leg
Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"

Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"

lowest price pledge
Our Price: $224.68
Accessories and Parts
This item qualifies for Free Shipping
Shipping Weight: 29 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included). Call 800-298-1624 to order Stromberg Carlson accessories and parts part number LG-177201 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Guaranteed Lowest Price and Fastest Shipping for Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2". Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (18)
  • Q & A (48)
  • Videos (3)
  • Photos
  • Why etrailer?

Stromberg Carlson Accessories and Parts

  • Trailer Jack
  • Camper Jacks
  • Legs
  • Follow Leg
  • Stromberg Carlson

Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).


Features:

  • Replaces the follow jack for your tandem landing gear
    • Designed for use with Stromberg Carlson models LG-2 and LG-4
    • Can be used with most electric landing gear sets, including Atwood, Venture, and Lippert models
  • Connects to the lead jack in your landing gear set with a connecting rod, or cross shaft (not included)
  • Constructed of heavy-duty steel
  • Made in the USA


Specs:

  • Total lift: 34-7/8"
    • Travel: 19-7/8"
    • Drop leg: 15"
  • Leg length: 33-1/2"
  • Weight capacity: 4,000 lbs


LG-177201 Stromberg Carlson Replacement Follow Leg for Venture Landing Gear - 33-1/2"

Item # LG-177201




California residents: click here


Video of Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Stromberg Carlson Landing Gear Replacement Lead Leg Review

Hi there fifth wheel owners. Today we're going to be taking a look at Stromberg Carlson's line of replacement landing gear legs. We're going to be looking at both the leading as well as the following leg. These are available in either a 33 and a half inch or 29 and a half inch drop. And there is a difference between those and how it's going to fit in your fifth wheel, so stick along with us, and we're going to show you how to take the appropriate measurements to determine which one's best for you. Here on the inside, you can get a better look at our leg here.

And what you're going to be getting is just the leg that you see here. The leg is going to include the black outer sheathing here. It does have the attachment point at the top for our shaft to connect to, but the shaft does not come included with it.Brackets that it attaches to also don't come included. You'll be reusing those as well. Because the main purpose of these replacements is just for if you have a damaged leg, because in most instances, if your leg gets damaged, it's usually because of an accident.

It does happen. You leave your legs down, you hook up your truck to your fifth wheel, and you start to take off, move a little forward, and the next thing you know, your legs are now damaged. Rather than spend a bunch of money replacing the entire system. We can replace just the damaged components. This is the same leg we we're just looking at, and this is where it extends down through our trailer, the bottom of our tube here.

Coming out of our tube, we have the extension here that is operated by our motor, or if you have a manual crank. And it also includes the drop-leg down here.What you don't get is the quick release here. We do have these available here at etrailer. We just reused the customer's old one. And in most cases, your old hardware is going to be able to swap over, so if it didn't get damaged, then you can just go ahead and reuse it.

The foot also does not come included, but you will receive a new pin. This pin can either be used to attach a foot, or if you don't have a quick link, you can use this pin to operate your drop leg. You just have to pull the pin out, the leg will drop down, and then you have to manually re-insert the included pin over here.Over here we've got our lead leg, and this is going to be very similar to your following leg. The difference is the shaft that comes out of it is designed to hook to your motor or your manual crank. You will get a little bit extra hardware with the lead leg, because you'll get the collar and attachments. You can see the new hardware here, where it attaches to both the cross shaft, as well as the collar that holds our motor and motor transmission in place. The 33 and a half inch length legs are going to be a direct replacement for Stromberg Carlson's LG-2 and LG-4 systems. The 29 and a half inch legs are going to be a direct replacement for Stromberg Carlson's LG-1 and LG-3 systems. Now regardless of which one you get, they're going to have a total lift of 34 and 7/8ths of an inch. And that's going to be the amount that comes out plus the drop shaft.Now you may not be aware whether you have a Stromberg Carlson or what model yours is, whether it's an LG-1 or 2. The best way to determine if this leg is going to work with your system is to use some measurements. We're going to go ahead and show you how to take some measurements, because this is not going to work with just the Stromberg Carlsons. It'll work with any system, as long as your measurements line up. So we're going to go ahead and head into the shop and we're going to compare one of the customer's original legs with our new one, and we're also going to show you how the measurements you'll want to take, where you want to take them, and how to use those to purchase the correct leg here on our website.We've got our old jack sitting next to our new jack here. So you can see these are identical, but what you want to check beforehand, and you can do this while this is in here, because you can see where our bolt used to pass through, we want to measure the distance between our tabs. Because these are actually the mounting tabs that hold it in here. It'll rest on the brackets, and those bolts ensure that it's going to stay rested on those brackets. We're going to measure from the outside of our tab to the outside of our tab, and we've got 21 and a half inches here. The most common sizes are going to be 21 and a half inches like we've got here, as well as 19 and a half inches. That's the slightly smaller size, but those are the two most common.The last measurement we need is the total length measurement, and that's going to be from the bottom of our painted surface here, because this is what moves, it actually extends. We want the stationary portion and we want to measure from top to bottom, and we're measuring 33 and a half inches. The two most common sizes are going to be 33 and a half like we have here, and the smaller size, which is typically 29 and a half. More often than not the 29 and a half is going to have that 19 and a half distance, and with our 33 and a half, the length measurements here, most often, you're going to have that 21 and a half for your tabs. Once you've got your measurements taken, you can verify on our website here, when you're looking at the jacks that you are considering purchasing to make sure they're all going to match up with your old one. And that completes our look at Stromberg Carlson's line of replacement landing gear legs..


Customer Reviews

Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" - LG-177201

Average Customer Rating:  4.8 out of 5 stars   (18 Customer Reviews)

Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).

- LG-177201
by:

I have a 36ft toy hauler as I was about to park it after a weekend at the dunes I was lowering the Landing gear and nothing motor turned no lift :( called etrailer and they were great they knew everything I needed and had it in stock , here's the best part shipping was very fast!!! , I installed the new replacement legs today and fit like a glove wow I'm back in business !! !!



- LG-177201
by:

Just what I ordered and they were perfect. Thanks Bill



- LG-177201
by:

Worked well. Easy to install



- LG-177201
by:

Other than having to grind off some material from the insides of the locator tabs on the sides because they would not fit flush they work good. The people at etrailer are great to work with and the landing gear came in 2 days. Thanks


Comments
Great
James - 09/22/2019



- LG-177201
by:

Exact fit. Seems to operate just fine. Very surprised I received it is a couple days.



- LG-177201
by:

Very fast delivery. Part fit perfect



- LG-177201
by:

Tim thank you the landing leg LG-177201 is a match for the vm900. even the gear Rachel was the same. and it came a day early. great product at a good price.



- LG-177201
by:

excellent and exact replacement for my broken landing leg on my 5th wheel



- LG-177201
by:

I purchased "landing jacks" for my 5th wheel trailer and had a great experience dealing with "etrailer.com". Even thought I ordered the incorrect item the first time, "etrailer" was excellent in providing me with return instructions; and refund. Upon ordering the correct items, items provided were correct and I installed them without any issues. I would highly recommend "etrailer.com"



- LG-177201
by:

The LG 177201 fit perfect. I removed the top cap and added more lithium grease. Some of the other E trailer down legs are equipped with grease zert fittings. This would have been a nice feature



- LG-177201
by:

Works great



- LG-177201
by:

Order re[placement leg for a landing gear on a 5th wheel. The people at etrailer were very helpful, especially Pat, who took the time to research the part that I needed.



- LG-177201
by:

I couldn't have received better service ! Dana was amazing and I always tell my friends about the great service she provided for me. I received emails start to finish from her the only thing Dana could have done more would have been install the landing gear for me ! as far as the product it is very good quality .



- LG-177201
by:

Made in USA ,great price, will install today and am sure it will operate as expected. David found what I needed and provided fine service.



- LG-177201
by:

There is nothing they could do to make this better experience, including the thoughtful follow up. Thanks to all of you.



- LG-177201
by:

Good quality and fair price.



- LG-177201
by:

Thank you so much. They were quick getting here and easy to assemble!



- LG-177201
by:

Went right in and worked


18
18

Ask the Experts about this Stromberg Carlson Accessories and Parts

  • Replacement Slave/Follow Leg for Atwood Landing Gear 71415 on 1999 Damon Hornet
    For a replacement slave leg in your Atwood landing gear set up 71415 you can use Stromberg Carlson, # LG-179014. The lead leg, just in case you want to know, is part # LG-179013. Each leg has a 3,000 pound capacity. These legs have many of the same parts because there is essentially an industry standard for this size leg. Atwood is no longer in business.
    view full answer...
  • How to Select the Correct Replacement Follow Leg for Fifth Wheel Landing Gear
    In order to choose the correct replacement follow leg, you will need to know the manufacturer or model number, which should be visible via a sticker or stamp somewhere on the landing gear. The reason for this is there may be slight differences that cause imbalance if the landing gear legs do not match. So if you have Stromberg Carlson models # LG-2 or # LG-4 then the correct replacement follow leg would be # LG-177201. I have added a link to our page with each of our follow legs for...
    view full answer...
  • Can Trailer Landing Gear Be Damaged Internally By Lowering Too Far?
    Landing gear legs do typically have weld stop brackets to hold the legs securely to the welded brackets on your trailer frame. The landing gear will have a maximum capacity lift, which for the Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" # LG-177201 you asked this from is 34-7/8 inches. That measurement comes from the 19-7/8 inches of physical internal travel and the 15 inch drop leg. The leg can be physically overextended or retracted too far which can cause the...
    view full answer...
    Image 1 for
  • Warranty On Lippert Products
    The Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" # LG-177201 just like all Lippert Products has a 1 year warranty from date of purchase. I confirmed this with my contact from Lippert.
    view full answer...
  • Replacement Landing Gear Follow Leg for 1994 Prowler by Fleetwood
    RBW was the landing gear supplier for Fleetwood for several years. Usually you can find the brand and model information directly on top of the jack or landing gear, or sometimes it is near the bottom of the outer tube. A third place to check is the housing that covers the gears. If you cannot find it in any of these places, it may be in the owners manual literature. Note that RBW is no longer in business so you might consider replacing the landing gear now since in the future parts availability...
    view full answer...
  • Is it Possible to Go From Taller Lippert Landing Gear 33-1/2 to 29-1/2 inch Legs
    The bracket spacing between the two different size Lippert landing gear legs are not the same. The 33-1/2 inch legs have spacings of 19-1/2 and 21-1/2 inches whereas the shorter legs are 15-1/2 and 17-1/2 inches.
    view full answer...
    Image 1 for
  • My Follow Leg Has Different Gearing Than the Lead Leg
    I have an option to get the legs on your 1998 Nash 29.5 Fifth wheel to even out, but unfortunately gears are brand specific, so you won't be able to install replacement gears that will even out the gear ratio between two different brand legs. The most efficient option is to replace the lead leg with the matching Replacement Lead Leg for Stromberg Carlson Landing Gear # LG-177202. Replacing the leg will enable you to keep the legs moving at the same speed and will even out your trailer.
    view full answer...
  • Replacement Follower Leg Recommendation for a Venture Landing Gear Set
    The correct replacement follower leg for your Venture landing gear is the Replacement Follow Leg for Stromberg Carlson Venture Landing Gear # LG-177201.
    view full answer...
  • Inner Leg Travel of Replacement Follow Leg # LG-177201
    For the Replacement Follow Leg # LG-177201 that you mentioned it has a travel length of 19-7/8 inches.
    view full answer...
  • Will Stromberg Carlson Replacement Follower Landing Gear Leg Fit a Venture Landing Gear System
    Yes, you can use Replacement Follow Leg for Stromberg Carlson Landing Gear # LG-177201 with your Venture landing gear system. This same leg design is used by many manufacturers so it is interchangeable with them.
    view full answer...
  • Could Stromberg Leg Work for Replacement Landing Gear for 2012 Keystone Mountaineer
    Yes you can use the replacement follow leg # LG-177201 to replace the leg you have. Venture, Stromberg, Lippert, and LCI basically all make the exact same jack legs.
    view full answer...
  • Solution for Atwood Landing Gear Jack Legs that are Damaged on Fifth Wheel
    So Atwood stopped making fifth wheel landing gear so the replacement legs are no longer available and also there are no other manufacturers that have a suitable replacement. So what you'd need to do is replace the landing gear altogether like with the Stromberg part # LG-183708 for a manual setup or part # LG-1 for a powered kit.
    view full answer...
  • Replacement Jack Legs for Venture Landing Gear VMC900R
    If you are in need of a replacement lead leg for your Venture vmc900r you'd want the part # LG-177202 or for a follow leg part # LG-177201. The lead leg is the one you'd attach the crank handle to and the follow leg is the leg that is opposite of that one.
    view full answer...
  • Replacement Gear Box and Landing Gear Legs for 2011 Open Range Residential Model 398
    Based on the dimensions you mentioned the landing gear set you have is the part # LG-4 which for a replacement gear box you'd want the part # LG-179015 and for replacement legs you'd want the part # LG-177202 for a lead leg and # LG-177201 for a follow leg.
    view full answer...
  • Replacement Landing Gear Legs for Set with Number VMC900R
    I spoke with my contact at Stromberg Carlson who confirmed that the Replacement Lead Leg # LG-177202 will work well as a replacement for your Venture VMC900. Then for the matching follower leg you would want the part # LG-177201.
    view full answer...
  • Replacement Landing Gear Legs for a 2010 Jayco Eagle Super Lite
    I have attached a photo for you that shows how to properly measure the outer tube on a landing gear leg. I have not heard of a landing gear leg with a 36-1/2" long outer tube so if this is what you have then I recommend you replace both the lead and follow legs so that you can be sure they match. For this, the correct replacement for you should be part # LG-177202 for the lead leg and part # LG-177201 for the follow leg. In order to make sure they will work you need to measure between...
    view full answer...
    Image 1 for
  • How to Pick Out Landing Gear Replacement Legs
    The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it is 17-1/2 inches then the # LC333964 would fit and the replacement legs are part # LG-177202 for a lead leg and part # LG-177201 for a follower. If your frame clamps are instead 20-1/4 inches the Ultra Fab part # UF17-943010 would be a direct...
    view full answer...
    Image 1 for
  • Replacement Landing Gear for VMC900R
    For your VMC900R landing gear if you want to replace the lead leg I recommend the Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2" # LG-177202 and then for the follow leg # LG-177201. I've attached a photo of the measurements of these jacks to assist. If you want to replace your entire system I recommend the Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs # LG-183708.
    view full answer...
    Image 1 for
  • Replacement Parts for Stromberg Carlson Landing Gear Legs
    I spoke with my contact at Stromberg Carlson and they do not offer the Jack Nut 911-10 as a replacement part. Therefore, your only option would be to replace the entire landing gear leg. I have attached these replacement options for you as well. There is a repair kit available, the Jack Repair Kit for Stromberg Carlson Landing Gear part # LG-146059 for lead and part # LG-146060 for follow but it does not include the jack nut. Replacement Lead Leg for Stromberg Carlson Landing Gear -...
    view full answer...
  • Replacement Landing Gear Follow Leg for 2003 Keystone Everest
    We can get you un-stranded! The correct follow leg for your landing gear is going to depend on how long it is. If your leg measures 29-1/2" (see attached photo), you would need replacement # LG-179014, which can be used with most landing gear sets Atwood, Venture, and Lippert models. The same is true of replacement # LG-177201, which you would use if your leg measured 33-1/2". I've attached a link to a video review for you to take a look at as well.
    view full answer...
    Image 1 for Image 2 for
  • How To Find the Correct Replacement Screw For a Landing Gear Leg On a 5th Wheel Trailer
    I do have an option for you but in order to confirm the correct replacement landing gear leg screw for you, I would need to know the model number of the jack. If you can provide this for me then I can go about seeing if we have the correct landing gear leg screw for you. If you cannot locate any sort of model number then your best option would be to just replace the entire jack leg as this will only cost you sightly more and it will make things much easier in regards to both installation...
    view full answer...
    Image 1 for
  • Troubleshooting Venture M-9000-PK Landing Gear on 2010 Komfort Fifth Wheel Trailer
    The next step is to take apart the top of the jack and check the gears there. If you find your problem there, possibly some worn gear teeth, and you have Lippert landing gear, the repair kits are parts # LC146059 for the lead leg and # LC146060 for the follow. Another possibility is the screw down the center of the jacks has possibly gotten stripped. However, if this is the case your best bet will be to replace the legs. You'll need to measure the outer tube to determine which legs...
    view full answer...
  • Replacement Follow Jack for 2013 Forest River Salem Hemisphere Lite 346
    For your 2013 Forest River Salem Hemisphere Lite, the Replacement 5th Wheel RV Landing Gear Follow Leg w/ Snap Pin for Lippert Components RVs # LC179014 is most likely the correct replacement. It has an outer tube height of 29-1/2 inches and a distance between the bracket stops of 17-1/2 inches outside to outside and 15-1/2 inches inside to inside. I've attached a diagram to assist. If your weld stops are spaced 19-1/2 inches and 21-1/2 inches then you will want the longer 33-1/2 inch...
    view full answer...
    Image 1 for Image 2 for
  • Does etrailer.com Landing Gear Have Same Ratio as Atwood Landing Gear
    So the Atwood landing gear box that you have has a 3:1 ratio which is the same ratio as what comes with the etrailer.com Landing Gear part # RVLG-8000 that you referenced. For a replacement follow leg for an Atwood landing gear set you'd want the part # LG-177201.
    view full answer...
  • Venture M-9000-PK Landing Leg Replacements
    The replacement lead leg for Venture landing gear is part # LC119102. The follow leg would be # LG-177201.
    view full answer...
  • Replacement Landing Gear Legs for a 2004 Keystone Cougar 254EFS
    The correct landing gear leg for your 2004 Keystone Cougar 254EFS is more than likely going to be either the Replacement 29-1/2" Long Follow Jack part # LG-179014 or the Replacement 33-1/2" Long Follow Jack part # LG-177201. In order to determine which one you need, you will have to measure the length of the outer tube on the landing gear leg you have now. I have attached a photo that shows where to measure for you. The Lippert 29-1/2" Follow Jack part # LC179014 that you referenced can...
    view full answer...
    Image 1 for
  • Can the Stromberg Carlson Electric Landing Gear Set LG-4 Be Bought Without the Motor
    In order to piece together a kit similar to the Stromberg Carlson Electric Landing Gear Set part # LG-4 but without the motor you will need to obtain the following: Replacement Lead Leg for Stromberg Carlson Landing Gear - part # LG-177202 Replacement Follow Leg for Stromberg Carlson Landing Gear - part # LG-177201 Replacement Footpad and Pin for Stromberg Carlson Landing Gear - part # LG-119225 (2) Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear - part # LG-179015 Replacement...
    view full answer...
  • Replacement Follower Leg Recommendation for Landing Gear Set VMC900L
    The correct replacement follower leg for your set that has model number VMC900L is the part # LG-177201. If your other leg is still working fine there would be no reason to replace it at this time.
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee DeAnne T
Written by:
DeAnne T
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Laura H
Updated by:
Laura H
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Matthew E
Updated by:
Matthew E
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.