bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Accessories and Parts Help Hub
  4. Accessories and Parts Q&As
  5. Question 467662
Q & A Icon

Lippert 2.0 Ground Control Landing Gear Problem Solution  

Updated 07/22/2020 | Published 07/21/2020



Question:

Im trying to diagnose which part is broken on my 2015 Open Range 316RLS fifth wheel with Lippert 2.0 Ground Control System. The left front landing gear stopped working during a leveling adjustment and the leg is under full weight at the moment. The motor will spin freely in both directions - normal motor noise, no grindinginch etc. And likewise the shaft coming out the back side of the gear box turns with it, but there is no vertical movement to the jack. Would this be a fault with the motors clutch? You have a replacement motor with clutchinch LC241795. Or with the gearbox - Lippert part 179015? which I dont see you carrying Or perhaps something else, like the jack leg itself. Thanks,

0

Expert Reply:

You'll need a new jack leg based on what you described. For a replacement you'd want the part # LC241845 for the driver side or part # LC241846 for the lead leg that is normally on the passenger side.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>