Video Transcript for Review of etrailer Trailer Tongue Lock - Latch Lock - Surround Lock - e54YV

Hello everybody, this is Jeff at etrailer. Today we're gonna take a look at this etrailer hitch receiver lock, surround coupler lock and latch lock set. Now this complete set here, that's in this enclosed hard plastic case, this set's gonna give you complete trailer security that's very easy to use. Once we open this, there's two latches, we'll open it up, you'll be able to see this kit is gonna include a five eighths inch diameter hitch receiver lock over here that fits two inch and two and a half inch hitch receivers. Over here, we've got a quarter inch pin, latch style ball coupler lock, and in the very middle, this high visibility, yellow, two and five 16th ball coupler lock, that'll slide onto your coupler. And what's nice about this kit, they are all key alike.

So they use the same key so you're not fumbling through a key ring, or guessing which key fits with. Comes with two keys. And what's nice is the finish on these, you can see they have a chrome finish on these two locks. And right here, the middle one has a nice high visibility yellow finish. This makes it a clear theft deterrent, makes it easy to see your trailer is locked.

And then using the one key system keeps the routine fast and simple. The chrome and yellow powder coat will resist corrosion on there. And the covered keyways on these locks will help the locks working smoothly. And what's nice is when these are all snapped and the keys are put into place, locked closed, the case keeps every lock and key in one place so you're not digging through your truck or leaving a piece behind. This will fit easily in your cab, your toolbox or your truck bed, keeps all the gear in one spot.

And what's nice is when it's time to hitch up or park for the night, all you have to do is unlatch it, open it up, and you can see everything stays right where it should be. Now the locks themselves, pretty simple, like a lot of locks out there. Just pop open the cap. There's your oh, load your lock, take your key, insert it, and then to unlock it, just turn it like you're unscrewing a bolt. And once you get it far enough, it comes right off.

Then you can install this, put your lock back on until it lines up. Once you get it to line up, just like that, then go ahead and start twisting it like you're tightening a bolt down. And once you get it tight all the way, it'll stop, back it off a little bit. Slide the key out, put the cover on, and you're locked, all ready to go. Now this one will operate the same way. This one here is just a little different. This one here uses a pin. you can see here, that'll lock onto your coupler to keep anybody from hooking up to it. So to unlock it, just turn this a quarter of a turn and you can see the pin drop. So now you can slide it on, push the pin up, turn this back a quarter of a turn, and the pin stays locked in there. Keep anybody from hooking up to your coupler. Now the product page does offer many other specs of all three of these locks, the different dimensions that are needed, and you want to check that out to make sure it's gonna work for your application. Now if you do have any other additional questions regarding this part or any other item we carry, please feel free to reach out to us so we can help you get all of your questions answered for you. But that is gonna do it for a look at the etrailer hitch receiver lock, surround coupler lock and latch lock set.