Atwood Landing Gear Replacement Recommendation for 11-1/2 Inch Weld Stop Measurement

Updated 05/13/2022 | Published 05/12/2022

Products Featured in This Question

Lippert Electric Landing Gear w/ Handle - Inside Mount - 34-3/4" Lift - 5,000-lbs

(70)

$1347.89

Replacement Control Switch for Lippert Hydraulic Landing Gear - White

(37)

$104.31

Lippert Electric Landing Gear w/ Handle - Outside Mount - 34-3/4" Lift - 5,000-lbs

(70)

$1288.02

Question:

Can not find any numbers on legs. Between brackets is 11.5 inch the black outer case from the bottom of the cap to the outer end is 34.5 inch roughly

asked by: Ray P

Expert Reply:

I recommend checking out the Lippert 5K rated landing gear which has matching weld-stop dimensions to what you have and comes with the weld-stops on the inside as part # LC712690 or the outside as part # LC712689.

The legs measure 33-1/2" so they are the same height as what you have and these feature a 19-3/4" lift. These come with a handle for manual operation as well as a motor that can be wired to your current controller or you can add a controller with part # LC138415.

Attached is a video of me highlighting the specs for the landing gear legs as well as a review video of the controller.

expert reply by: Jon G