Video Transcript for Malone Axis Load Roller for Malone Truck Bed and Roof Load Extender Review

A great addition to your Malone Axis load extender is gonna be this roller. It's 42 inches long. It's just gonna make it a little bit smoother to get some of those longer loads up onto your roof, especially for kayaks. You don't really want it to scratch up. Obviously plastic is not as hard as the steel that the Axis is made of, so with the nice soft roller on there, you're gonna be able to just give this a little bit of extra help whenever we're loading up our kayaks, our boards, or anything else that you have. All in all, making a job a little bit easier is always something I look for and protecting my investment is also another thing I look for.

So this is definitely gonna be something that I would definitely get if I had the Malone Axis. It comes with all the hardware that we need to mount it up. All it gonna have is just a little stud, a little nut, and a washer. So we can either put it on the bottom or you can put it on the top, if that's gonna be best for you, but just know all you need to install it is a 17-millimeter socket. This isn't just for loading.

It's also for unloading and not just for kayaks. It can also be for ladders, or also some of those bigger lumber or pipes and stuff that you may be using. It just makes it so much easier to get the load off and it rolls nice and smoothly. You don't hear it scratching anything up. Especially if you're carrying stuff for a job site that potentially could get scratched and you don't wanna bring some damaged item to somebody's house and install it, and it's already scratched.

So it's just gonna protect it as long as you have it up on there. The roller is 42 inches. And what that means is just the rubber section right here. But when we have this installed, we're not gonna be able to do any adjustments with the Malone Axis. So from the inside to inside, it's about 45 inches whenever you have it completely loaded up.

So just know you're not gonna be able to adjust it, but it's super easy to take it off. So if you do need to adjust it in, it's not gonna be a problem. You just have to gonna have to remove the roller, and it's just two bolts. It really isn't a whole lot to this. It's just nice to have those extra little additions to your Malone Axis, just to make it a little bit easier to load up some of your stuff. So that's pretty much it for a look at the Malone Axis 42-inch rubber roller..