1. Accessories and Parts
  2. Lippert
  3. Trailer Jack
  4. Camper Jacks
  5. Handles and Cranks
  6. Sidewind
Replacement Crank Handle for Lippert Manual Scissor Jack

Replacement Crank Handle for Lippert Manual Scissor Jack

Item # LC285324
lowest price pledge
Retail:$39.43
Our Price: $25.29
You Save: 36%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.78 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Replace the crank handle that came with your Lippert Components manual scissor jack with this new one. Crank handle assists in lowering and raising your scissor jack on your RV or trailer. Call 800-298-1624 to order Lippert accessories and parts part number LC285324 or order online at etrailer.com. Free expert support on all Lippert products. Guaranteed Lowest Price and Fastest Shipping for Replacement Crank Handle for Lippert Manual Scissor Jack. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (9)
  • Q & A (19)
  • Videos (1)
  • Photos
  • Why etrailer?

Lippert Accessories and Parts - LC285324

  • Trailer Jack
  • Camper Jacks
  • Handles and Cranks
  • Sidewind
  • Lippert

Replace the crank handle that came with your Lippert Components manual scissor jack with this new one. Crank handle assists in lowering and raising your scissor jack on your RV or trailer.


Features:

  • Manual crank handles can become easily lost at the campsite. Order your replacement crank handle here!
  • Standard Lippert Components manual scissor jack crank handle
  • Can also be used with Lippert power tongue jacks in the event of a power failure
  • 3/4" Hex socket
  • 90-Day warranty


285324 Replacement Crank Handle for Lippert Components Manual Stabilizer Jack





Video of Replacement Crank Handle for Lippert Manual Scissor Jack

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Lippert Components Trailer Jack LC285324 Review

Speaker 1: Today we're taking a look at a replacement crank handle for Lippert Components manual scissor jacks. Crank handles can easily be lost or misplaced. This is a standard crank handle for Lippert Components manual scissor jacks. It can also be used with Lippert power tone jacks in the event of a power failure for manual operation. Here at the end it features the three quarter inch hex socket. It is made from a steel construction with protective finishing to keep it safe from rust and corrosion and it offers a nice easy-grip design, so it's nice and comfortable when using it and cranking.

It's got this rubber part right here that rotates all the way around, and it's got a coating over this portion of the unit as an easy-grip design, and that allows for nice, seamless operation for raising and lowering your jack. That's gonna do it for today's look at the replacement crank handle for Lippert Components manual scissor jacks.


Customer Reviews

Replacement Crank Handle for Lippert Manual Scissor Jack - LC285324

Average Customer Rating:  4.8 out of 5 stars   (9 Customer Reviews)

Replace the crank handle that came with your Lippert Components manual scissor jack with this new one. Crank handle assists in lowering and raising your scissor jack on your RV or trailer.

- LC285324
by:

Received products with no damage,and in a timely manner,no hassle,no problem!! Thanks etrailer.com



- LC285324
by:

Worked as planned



- LC285324
by:

The items was exactly as described and what I was looking for. The service from etrailer.com was excellent. The item was at my door much earlier than I ever expected. The price was lower than Amazon where I do a lot of buying, even with the shipping.



- LC285324
by:

Great customer service! Thank you!!



- LC285324
by:

Handle does what it was meant to do, but our old handle had another grip at the end to aid in cranking instead of holding on to the metal.



- LC285324
by:

Well made exactly what I was looking fo r,thanks.



- LC285324
by:



- LC285324
by:



- LC285324
by:


9
9

Ask the Experts about this Lippert Accessories and Parts

  • Long Stabilizer Jack Crank Handle With 3/4 Inch Socket
    There are stabilizer jack handles with a 3/4" socket that have some length to them, but not quite the 16 inches you are looking for; the closest would be the Replacement Handle for Scissor Jacks # BAL-24033. This handle measures 27-1/2" long overall and 14" from the end of the socket to the first bend.
    view full answer...
  • Correct Replacement Handle for Lippert Electric Trailer Tongue Jack
    The correct replacement manual override handle for a Lippert tongue jack is the Lippert Electric Trailer Jack with Footplate part # LC285324. If the photo you have attached is of the jack you need a handle for then it will work though I am a bit confused by the way you have described this. It's a simple hex nut is all. The socket will slip over the hex nut allowing the leg to extend/retract.
    view full answer...
    Image 1 for
  • Socket Size for the Lippert Components Electric Stabilizer Jack Manual Crank Handle # LC285324
    I went out to our warehouse to grab a Lippert Components Electric Stabilizer Jack Manual Crank Handle # LC285324 and found that the socket size 3/4 inch with an outer diameter of 1 inch. If you take a 3/4 inch wrench or socket out to your current stabilizer jack and it's the right size for it this handle will work as a replacement.
    view full answer...
  • Can the Crank Handle # LC285324 be Used to Remove Lung Nuts on a 2002 Four Winds Hurricane
    The Replacement Crank Handle # LC285324 that you referenced has a 3/4" Hex socket. If that is the same size as what you have for your 2002 Four Winds Hurricane then it will fit and work great to remove a tire!
    view full answer...
  • Installing Lippert Spare Tire Winch with Cable
    There aren't any instructions for just the Lippert Components Spare Tire Winch with Offset Cable # LC159056 at all, but you will need to find a way to bolt it onto the underside of your RV frame; the mounting holes are 5-1/4" apart on center and I have added a photo from a customer which shows how they did it on their trailer. There are instructions for the RV Spare Tire Carrier with Winch - 71" Overall Width # LC159041, which I have linked for you that will require you bolt to your...
    view full answer...
    Image 1 for
  • Crank Extension and Crank for Lippert RV Spare Tire Carrier with Winch
    The Lippert Components RV Spare Tire Carrier with Winch - 71" Overall Width # LC159041 will use the Replacement Crank Handle for Lippert Components Manual Scissor Jack # LC285324. The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies - 35-1/2" # LC1315411. The extension is to remain attached you can use a pin or even weld it in place. The 71 inch extension will require a mount to hold the extension in place at the frame to support the opposite end of the...
    view full answer...
  • Replacement Override Nut and Crank Handle for Lippert Powered A-Frame Jack
    We have the replacement override nut with the part # LC55FR and also the replacement crank handle part # LC285324. The size is a 3/4 inch hex socket if you had a ratchet and socket set nearby.
    view full answer...
  • How To Operate the Lippert Components Spare Tire Winch with Offset Cable
    In order to operate the Lippert Components Spare Tire Winch with Offset Cable part # LC159056 you'll need both the Crank Extension for Lippert Components Spare Tire Winch Assemblies part # LC1315411 and the Crank Handle for Lippert Components part # LC285324. The extension rod can be cut to fit your exact needs.
    view full answer...
  • Will Lippert LC159041 Spare Tire Carrier Fit on a 2022 Rockwood Mini Lite 2509s
    The Lippert # LC159041 isn't a RV-specific product. Lippert doesn't provide us a list of which RV's it fits or doesn't fit. However, there is a way you can determine if it'll work for you. The carrier has an overall width of 71 inches, so if the frame members of your travel trailer are 71 inches apart, measured outside to outside, the # LC159041 would work just fine for you. This carrier is designed to attach to the frame members under the rear of the travel trailer, not at the trailer...
    view full answer...
  • Manual Crank Handle Replacement for FIC-3500 Electric Trailer Jack
    We don't carry the Fastec FIC-3500 electric tongue jack or parts specifically for it. From what I read in online forums both parts and documentation for this imported jack are hard to come by. I was able to find the owner's manual online but it only identifies the manual crank by a part code "J" with no dimensions or details. What you might do is measure both the hole size in the jack housing and the fitting size within it and then look for a socket you can use with your cordless drill...
    view full answer...
    Image 1 for
  • Can Electric Motor be Installed on Lippert Scissor Stabilizer Jack
    As long as you are able to get the motor to fit the Lippert Scissor Stabilizer Jack # LC285325 I see no problems with doing that. Typically you'd use the Manual Hand Crank # LC285324 to operate the jack which has a 3/4" socket. It would also be worth noting the various dimensions of this stabilizer jack. I have attached some photos to this answer page for you to reference and compare with what you currently have. Please note that this jack is only meant to help stabilize your trailer...
    view full answer...
    Image 1 for Image 2 for
  • Where to Connect Manual Crank on Lippert Jack
    The manual crank # LC285324 is inserted into the top of the head unit for the Lippert Electric Trailer Jack # LC285318. You first need to remove the rubber plug to gain access to the attachment point (see attached photo).
    view full answer...
    Image 1 for
  • Replacement Hand Crank Compatible With Haul Master 3500 lb Electric Jack
    We don't carry the Haul Master jack so I can't tell if it is a socket or a slotted crank and the pictures in the manual I find online are of no help. If it is slotted, the Replacement Manual Override Crank for Bulldog Powered-Drive Trailer Jack # BD500203 most likely will work. If it is socketed, we would need to know the socket size to make a recomendation. If it was 3/4" you could use the Lippert # LC285324
    view full answer...
  • Single Replacement Stabilizer Scissor Jack for 2020 Imagine 2670MK Trailer
    I can help you determine which single stabilizer jack is the best option for your 2020 Imagine 2670MK, though there isn't a list or any type of database, for example, that has specific replacement parts for trailers. That said, all you really need to know is the amount of travel you need as scissor jacks are universal fits. The best option is likely the 24 inches of lift of the Lippert Scissor Stabilizer Jack # LC285325, which has a 5,000 lb capacity. It also uses a handle (part # LC285324)...
    view full answer...
  • Can the Lippert Electric Trailer Jack # LC285318 be Operated Manually
    Most electric jacks have manual overrides on them just in case there is an emergency and there is a power loss. If you have the Lippert Electric Trailer Jack # LC285318 that you referenced then the manual operation can be accessed at the top after the plug is removed (see attached picture). This jack comes with an emergency crank handle but if you misplaced yours you can get a replacement using part # LC285324 on our site which has a 3/4" socket.
    view full answer...
    Image 1 for
  • Replacement Manual Crank Recommendation for Lippert Powered A-Frame Jacket
    For a replacement manual wrench for your powered Lippert jack part # LC285318 you would want the part # LC285324. Or if you need to operate the manual crank right now grab a 3/4 inch socket, extension, and ratchet and you'll be able to turn it manually with that as well.
    view full answer...
  • Replacement Crank Recommendation Lippert Electric Trailer Stabilizer Jacks
    Your electric stabilizer jacks should take a 3/4 inch hex socket if you need to manually override them. Or you can use the part # LC285324. For a motor most likely you would need the part # # LC138445 to fix yours that stopped working.
    view full answer...
  • Recommended Spare Tire Winch For Gooseneck Trailer
    For a spare tire winch for your trailer I recommend the Lippert Components Spare Tire Winch with Offset Cable # LC159056 which will mount to the frame of the trailer. You will also need the Replacement Crank Extension for Lippert Spare Tire Winch Assemblies # LC1315411 which will be permanently mounted to the winch. If you need to shorten the extension you can cut the side with the hole and re-drill the hole after you have the extension cut to the proper length. Using the Replacement...
    view full answer...
  • Manual Crank For Bulldog Velocity Series Electric Landing Gear Jack BD185402
    I have added a link for you below to the manual for the Bulldog Velocity Series Electric Landing Gear Jack # BD185402; it is a maintenance-free jack so there are no grease points on it. In regards to the manual crank, it simply requires one with a 3/4" hex socket, so you can use one of the following: - Replacement Crank Handle for Lippert Manual Scissor Jack # LC285324 - Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks # UF48-979005
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Chelsea B
Written by:
Chelsea B
Employee Kristen H
Updated by:
Kristen H
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624