See what our Experts say about this CURT Hitch Cargo Carrier

• Will Trailer Hitch and Cargo Carrier Be Useful on 2024 Honda Civic Touring
  Hello again Dennis; it really depends on what your max tongue weight is on the 2024 Honda Civic. The Curt # C92UR has a max tongue weight of 200 lbs. A cargo carrier like the # C18145 and # C18110 will take up 30 lbs of that leaving you with 170 lbs of the hitch capacity to carry your clothes and other items. Assuming the vehicle capacity is the same or similar (you're limited by whichever capacity is lower) I would say that is pretty useful. The cargo carriers for a 1-1/4" hitch aren't...
  view full answer...
• Is a 1-1/4 to 2 Inch Trailer Hitch Receiver Adapter Recommended for Use with a 2 inch Cargo Carrier
  I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4 inch hitches, especially Class I hitches, are not designed to handle. For this reason all 1-1/4 to 2 inch hitch adapters decrease the hitch or vehicle tongue weight capacity, whichever is lowest, by 50 percent, making a class one hitch only...
  view full answer...
• Roof Rack and Cargo Carrier that Fits 2023 Jeep Wrangler Unlimited with Sky Touch Roof
  For a roof rack that fits your 2023 Jeep Wrangler Unlimited Willys with the Sky Touch Top we have the Thule Wingbar Evo rack part numbers # TH711500 and # TH33ZR which would work really great. This is a very high quality rack that is also very quiet. Then for a hitch cargo carrier we have the Curt part # C18110 that sits low enough that the rear gate of your Wrangler would still be able to open.
  view full answer...
• Options For Securing Items In Hitch Mounted Cargo Carrier
  Although nothing is completely theft-proof when placed in an open cargo carrier like part # C18110, you can take some measures to make it a lot tougher for thieves. If the cargo can be placed in one container or bag like the etrailer Cargo Bag, part # e98990, that can deter would-be thieves from taking anything because it is tougher to get to. Another option is to use some locking straps like part # RRRTD35L. These are 1-inch wide and 11-1/2 ft long and comes with locks and keys to...
  view full answer...
• Hitch And Bike Rack For Carrying Two Lectric XP4 Ebikes On A 2016 Chrysler 200
  Hi Gregg! We do have a hitch available for your 2016 Chrysler 200 with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11403. As this is a Class 1 hitch, your options for a bike rack will be more limited. The Lectric XP4 bikes being as heavy as they are will limit that even more. With the battery taken out, a Lectric XP4 will weigh 62 pounds and that made one more option available. I will warn you, the two options that will work with a Class 1 hitch and bikes that weight...
  view full answer...
• What Options do I Have to Haul My Cummings P4500 Generator on My 2022 R-Pod 180 1 1/4" Receiver?
  Hello Dwain, I am happy that you made it to our site! Yes, a cargo carrier is a great option for hauling your generator. Since you have a 1 1/4" receiver on your 2022 R-Pod 180, and when I look up the specs for the Cummings P4500 it has a length of 24 1/2" and a width of almost 18 1/2", the 19x47 Curt Cargo Carrier # C18110 is the best cargo carrier option we have for your 1 1/4" receiver. The great thing about the # C18110 is the the sleeve comes off the end so you can actually use...
  view full answer...
• Best Cargo Carrier between Curt C18150 and Pro Series 6502 for a 2018 Subaru Crosstrek w/2" Hitch
  I recommend going with a cargo carrier with a 2 inch shank because it will be the best fit with the least amount of movement between the carrier shank and the hitch receiver. So between the 2 you are looking at that would be # 6502. You could go with Curt carrier # C18152 which costs less than the Pro Series carrier, fits 2 inch hitches only, and is a little bit larger at 24 x 60 inches.
  view full answer...
• Cargo Carrier Recommendation for a 2012 VW Jetta Sportswagen
  At this time Class I trailer hitches are the only options available for the 2012 Volkswagen Jetta SportWagen. Most likely, because of the frame on the Jetta, there will not be a Class II option made available for this vehicle. The only cargo carriers we have available for Class I hitches at this time are the open style carriers, see link. I recommend the Curt Trailer Hitch, # C11474, to carry a cargo carrier behind your 2012 Jetta Sportwagen. For your Class I trailer hitch receiver,...
  view full answer...
  
• Carrying an Electric Bike and an Electric Trike with a 2005 Toyota Prius
  I may have a solution for you, but the 2005 Toyota Prius will not be able to carry these bikes on a traditional bike rack. Instead, you'll need to use a hitch-mounted cargo carrier and tie downs in order to carry these bikes. For a hitch, I recommend the Draw-Tite Class I Sport Frame Hitch, part # 24808. This Class I hitch will provide a mounting point for your bikes. I've included a video of this being installed on a 2005 Toyota Prius. This doesn't involve drilling, though you may...
  view full answer...
• Trailer Hitch for 2007 Jeep Grand Cherokee SRT8 with Center-Positioned Dual Exhaust
  Yes, the Curt Class I Trailer Hitch Receiver # C11103 is a confirmed fit on the 2007 Jeep Grand Cherokee SRT8 with center-positioned dual exhaust. I confirmed compatibility with Curt's fit guide and also with one of their technicians. The written instructions and a helpful installation article are both linked to assist you. Tools required are listed in the instructions. If you plan to tow you will also need trailer wiring; use part # HM40975-11933 if you have the factory tow package or...
  view full answer...
• Lightweight Trailer Hitch Recommendation for 2005 Toyota Prius
  The best hitch for your 2005 Toyota Prius that would work well for your situation is the Draw Tite part # 24808 that you referenced. It is a confirmed fit and would have the capacity needed for a 75 lb chair. The hitch weighs 28 lbs. Then for a carrier we have the Curt part # C18110 which would fit the hitch and have capacity needed for the chair.
  view full answer...
• How to Carry a Mobility Scooter on a 2017 Kia Forte Sedan
  According to my research, you can carry a scooter on the rear of your 2017 Kia Forte. However, the weight of the scooter, carrier, trailer hitch, cargo, and passengers cannot exceed 849 lbs. If you need further information on this then you will want to take a look at page 5-91 of your owner's manual. If you do not already have a trailer hitch I recommend using the Draw-Tite Sportframe Trailer Hitch Receiver part # 24903 (22 lbs) because you do not need to remove any underbody panels from...
  view full answer...
  
• Availability Of Class 1 Cargo Carrier With Ramp
  Hey Dan, thanks for reaching out. So I do have a solution that I want to run by you, but sadly, we do not offer a class 1 cargo carrier that has a built-in ramp. We do have a class 1 cargo carrier though, the Curt 19x47 Curt Cargo Carrier # C18110. This will work with a class 1 hitch with a 1-1/4" receiver and it can support up to 300 lbs. For the ramps, we offer a few lightweight aluminum ramp sets that can attach to the edge of the carrier. Ther are designed to be easy to carry, both...
  view full answer...
• Cargo Carrier Weight and Tongue Capacity for 2010 Toyota Corolla
  The 19X 47 Curt Carrier # C18110, weighs 30 pounds. Yes you must factor in the weight of the cargo carrier and cargo and any items loaded behind the rear axle of the car. You also need to check your vehicle maximum tongue weight rating and use the lowest maximum rating of the vehicle, hitch or cargo carrier as the weight that can be carried in the receiver hitch. If you have a 200 pound max tongue weight rating and no items loaded in the vehicle behind the rear axle then you could carry...
  view full answer...
• Transporting Scooter On Back Of 2006 Toyota Avalon With 1-1/4" Receiver
  Hey Brian, I may have a solution for you, but unfortunately there are not any 2" receivers for a 2006 Toyota Avalon, as most sedans are not rated high enough to be able to handle a larger 2" cargo carrier like you are wanting. I'd double check your owner's manual, but it looks like your car has a 200lb tongue weight rating on the 1-1/4" hitch. In that case, you could install the 19x47 Curt Cargo Carrier for 1-1/4" and 2" Hithes # C18110 you were looking at, as long as the scooter will...
  view full answer...
• Could Curt Cargo Carrier part # C18110 Carry a Desk
  The Curt Cargo Carrier part # C18110 would work well to carry a desk as long as the dimensions of the desk are compatible with this carrier. The platform dimensions of this carrier are 47 inch by 19 inch and this has a 300 lb weight capacity.
  view full answer...
• Recommended Trailer Hitch and Cargo Carrier for 2015 Lincoln MKZ
  For your 2015 Lincoln MKZ, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24897. Unlike the Curt model that is also confirmed to fit your vehicle, the installation of this hitch will allow you to trim and reinstall the underbody panel/fascia for accommodation with the hitch receiver and crosstube. On the Curt model, this panel is completely removed and cannot be reinstalled. This Class I hitch will use existing holes in your Lincoln's frame for a no-drill installation....
  view full answer...
• Is There A Way To Transport A Shoprider 6Runner 10 Powerchair With A 2019 Toyota C-HR XLE?
  Hi Chrystal! You are indeed going to want a hitch for towing a small trailer. The hitches we have available for your 2019 Toyota C-HR XLE are going to Class 1 options with the 1-1/4" receiver, so there aren't any cargo carriers that a big enough to accommodate the chair, unfortunately. I found the specs for the Shoprider 6Runner 10 Powerchair, thanks for giving me the model, and it looks like it weighs 176 pounds and is 24" wide by 40" long. The closest option we have to that is the Curt...
  view full answer...
• Trailer Hitch and Cargo Carrier for a 2013 Ford Fusion to Carry a Power Wheelchair
  What year is your Ford Fusion and does it already have a trailer hitch? With this information I can make some recommendations for you.
  view full answer...
• Trailer Hitch and Wiring Recommendation for 2017 Toyota Prius V
  For a trailer hitch for your 2017 Toyota Prius V the best choice is the Draw Tite part # 24847 as it is custom fit for your vehicle and has a great price. For trailer wiring you would want the part # 118610. For a ball mount you would want the part # 3593 which is designed for the hitch and then for a 2 inch hitch ball you would want the part # 19258.
  view full answer...
• How Much Does The TowSmart Hitch Adapter Weigh
  Hi Dwight, The TowSmart Hitch Adapter # TS52FR weighs 6.25lbs, but using a hitch adapter would reduce the capacity of the hitch by 50% because you're now leveraging the weight further away. You could go with the Curt # C18145, which weighs 27.58lbs or the Curt # C18110, which weighs 29.85lbs. The Flint Hill Goods # FHG59ZR you referenced is 24.72lbs so it's not much of a difference weight-wise. Both of the Curt carriers are compatible with 1-1/4" trailer hitches and wouldn't need an adapter.
  view full answer...
• Do You Have a Hitch for My 2020 Hyundai Ioniq for and Cargo Carrier to Transport a Wheelchair?
  Hi Dick, I'm really sorry to hear that you're anticipating the need for a wheelchair soon. I can only imagine how challenging that must be. For your 2020 Hyundai Ioniq, the best hitch option is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11486. It offers a 200-pound tongue weight, though I’d recommend checking your owner's manual as well to confirm what Hyundai advises for rear cargo capacity. Here are two carrier options, depending on what you need: - Curt Cargo...
  view full answer...
• Is There a Way to Haul My 153 Pound Scooter With My Curt Hitch Class 1 with 1 1/4" Receiver?
  Hello Darrell. I see that you did this question on the # C13315 page, that hitch is for the 2013 - 2025 Mazda CX-5 and is a class 3. The correct hitch for the 2018 Toyota Camry is the # C11576, this hitch has a tongue weight of 200, and towing of 2,000 as it is a class 1 which is why it has the 1 1/4 receiver. By using an adapter like # e43YR it will cut your tongue weight in half taking it down to 100 pound tongue weight. We do have another option that might work, a cargo carrier that...
  view full answer...
• When Using Curt Cargo Carrier in 1-1/4 inch Hitch is Same Hitch Pin Used
  When using the Curt hitch carrier part # C18110 in a 1-1/4 inch hitch you'd need to take off the 2 inch hitch adapter on the end of the shank. This will allow it to fit the smaller hitch size. The same threaded hitch pin gets used whether you use the 2 inch adapter or not as the shank has threads in it that the bolt threads too which allows the bolt to lock it against the hitch tube.
  view full answer...

Do you have a question about this Hitch Cargo Carrier?