Is There A Way To Transport A Shoprider 6Runner 10 Powerchair With A 2019 Toyota C-HR XLE?

Question

Question:

Im looking to see if there is a way to transport a Shoprider 6Runner 10 Powerchair using a 2019 Toyota CH-R XLE. Using a hitch and small trailer or something.

asked by: Chrystal B

0

Shoprider 6Runner 10 Powerchair
(click to enlarge)

Expert Reply:

Hi Chrystal!

You are indeed going to want a hitch for towing a small trailer. The hitches we have available for your 2019 Toyota C-HR XLE are going to Class 1 options with the 1-1/4" receiver, so there aren't any cargo carriers that a big enough to accommodate the chair, unfortunately. I found the specs for the Shoprider 6Runner 10 Powerchair, thanks for giving me the model, and it looks like it weighs 176 pounds and is 24" wide by 40" long. The closest option we have to that is the Curt # C18110, but it is only 19" wide. So towing a trailer does look to be the best option.

For that, you will want the following parts:

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11567
Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118756
Curt Class I Drawbar - 3-3/4" Rise - 11-1/2" Long - 2,000 lbs # C45023
1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs # C40001
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span # F-4

This would be full towing set up with everything you will need. Odds are the coupler on a small trailer that would be used for something like this would be a 1-7/8", but if it happens to be a 2", you would want to grab the 2" ball # C40018 instead of the one I have listed above. If you also wanted a locking pin instead of a standard pin, you could go with something like the Trailer Hitch Receiver Lock - Padlock Style for 1-1/4" Trailer Hitch Receiver # 5200 as well.

I know this is a lot of parts, so if you have any questions about any of them, just let me know!

expert reply by: Lazer S

0

Curt Hitch C11657 On Toyota C-HR
(click to enlarge)

Chrystal B.

1/8/2026

Thanks Lazer, I'll discuss this with my family. Do you have any suggestions on the trailer we can use?

Lazer S.

1/8/2026

@ChrystalB I would honestly check Harbor Freight first. I know they have some pretty small trailers that are light weight and affordable. Lowes has some too I think, but they are likely more expensive.

Answer 1

The 17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lb item #C18145 you were looking at weighs 28 lbs and is one of the lightest cargo carriers on the market. If the tongue weight capacity of your 2021 Toyota C-HR is 200…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Is There A Way To Transport A Shoprider 6Runner 10 Powerchair With A 2019 Toyota C-HR XLE?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching