TorkLift Lock and Load 27-3/4" x 24" Maximum Security Cargo Tray - 2" Hitches

Ask the Experts about this TorkLift Hitch Cargo Carrier
Do you have a question about this Hitch Cargo Carrier?

• Locking Generator Rack for a Honda 3000 Generator
  
• It looks like there are a couple of different Honda 3000 generators. Based on the length, width, and height of those you could use the TorkLift Lock and Load carrier # TLA7752. The tray measures 27-3/4 inches by 24 inches. I have linked a video review for you.
  view full answer...


• Trailer Hitch and Cargo Carrier to Hold a Generator on an Airstream Trailer
  
• Ultra-Fab 2" Trailer Hitch # UF35-946403 is pretty much a universal fit type of item. If the frame spacing on your Airstream is 47 to 77 inches then this hitch can be installed. It has a 350 pound tongue weight capacity so the combined weight of the cargo carrier and the Honda generator cannot exceed that limit. For a cargo carrier than can be used on the back of a trailer or RV I recommend TorkLift carrier # TLA7752 because it is large enough to hold the Honda 3000 generators. The...
  view full answer...


• Dimensions of the TorkLift Lock and Load 27-3/4" x 24" Maximum Security Cargo Tray
  
• The tray dimensions of the # TLA7752 are 27-3/4" long x 24" wide and the strap adjustment range is 13-3/4" long x 6-3/4" wide x 13-1/4" tall as a minimum and 27-3/4" long x 23-1/2" wide x 23" tall as a maximum. I am not sure which bent items you are referring to straightening, but I can't recommend you bend components of this cargo tray. I attached a review video and some product pictures of this carrier for you to check out as well.
  view full answer...


• Will a Honda EU3000 Generator with Wheel Kit Fit TorkLift Lock and Load Cargo Tray # TLA7752
  
• You will need to go by the overall dimensions of the generator with the wheel kit on compared to the useable space on the TorkLift Lock and Load cargo tray # TLA7752. The tray itself is 27-3/4 inches long by 24 inches wide. The strap adjustment maximum dimensions are 27-3/4 inches long, 23-1/2 inches wide, and 23 inches tall. If he height is not enough you could use a ratchet strap to secure it instead of the included strap.
  view full answer...


• Fit of Yamaha EF3000ISE 3000 Watt Generator in TorkLift Lock & Load Maximum Security Cargo Tray
  
• According to my research the Yamaha EF3000ISE 3000 Watt Inverter Generator is 26.8 inches in length, 17.5 inches in width, and 21.9 inches tall. This is great news because this is less than the maximum dimensions of the TorkLift Hitch Cargo Carrier # TLA7752 you were looking at. So, your Yamaha EF3000ISE will fit in the carrier great. I have linked the above mentioned product to this page for your convenience.
  view full answer...


• Can I Use a Cargo Carrier With the Curt Front Mount Trailer Hitch Receiver on my 2015 Ram 1500
  
• The Curt Front Mount Trailer Hitch Receiver # 31374, which is a confirmed fit for your 2015 Ram 1500 as long as it is a 4x4, has a Vertical Load Rating of 350 lbs. As long as that weight capacity is not exceeded then this front mount hitch will be a great solution for you to carry a generator on the front of your Ram. If you are wanting to use a cargo carrier to haul a variety of cargo, then I recommend going with the 24x60 Curt Cargo Carrier # C18153. This will fit in the 2 inch receiver...
  view full answer...


• Weight Capacity for the TorkLift Lock and Load # TLA7752
  
• I spoke with my contact at Tork Lift and he informed me that the TorkLift Lock and Load # TLA7752 that you referenced has a 500 lb capacity. I attached a review video for you to check out as well.
  view full answer...


• Can 2 Yamaha EF2000iS Generators Fit on TorkLift Lock and Load 27-3/4" x 24" Cargo Tray TLA7752
  
• Since the Yamaha EF2000iS generator is 11 inches wide and 19.3 inches long you could indeed put 2 of them side by side on TorkLift Lock and Load 27-3/4" x 24" Maximum Security Cargo Tray - 2" Hitches Item # TLA7752. You would not need extra straps if you placed the generators front to back instead of left to right. Since the carrier has an inside space of 27-3/4" by 24" the two generators would fit either way so front to back means you would not need additional straps.
  view full answer...


• Generator Carrier and Accessory Hitch for a 2016 Heartland Sundance Fifth Wheel Trailer
  
• Before you install a hitch on your 2016 Heartland Sundance, you'll need to verify that the trailer is actually able to have a hitch, and how much weight that the manufacturer recommends is on an installed hitch. Depending on the hitch, some are weld-optional, others are weld-on only. I recommend using Curt's RV and Camper Class III Hitch, part # 13703 if your manufacturer deems your RV hitch capable. This will fit up to a 72 inch wide frame and can weld to the I frame or bolt directly...
  view full answer...


• How Safe is the Steel Strap on the TorkLift Lock and Load Maximum Security Cargo Tray # TLA7752
  
• My contact at TorkLift advised that the two-piece adjustable steel security strap on their Lock and Load Maximum Security Cargo Tray # TLA7752 cannot be removed once the straps are adjusted properly to suit the load size and secured with the include lock. Items with a flat top surface, such as a tool box or generator, will rest right underneath the steel strap and so there will be little to no play at all in the straps. This protects the contents from curious hands. Please refer to the...
  view full answer...


• Torklift Lock and Load Cargo Carrier Recommendation for Securing Generator
  
• If you have a front hitch installed on your GMC 1500 truck you could use the Torklift Lock and Load part # TLA7752 which would work well to secure your generator. It will do a great job allowing you to transport the generators and will prevent theft as well. You didn't tell me what year truck you have so I can't pick you out a front hitch if you were in need of one.
  view full answer...


• Will Honda EU3000i Generator Fit on Tork Lift Lock & Load Cargo Tray # TLA7752
  
• The Honda EU3000i Inverter Generator weighs 78-lbs and measures 24-1/2 x 15 x 19-1/4-inches tall according to the Honda website. The tray portion of TorkLift Lock and Load Maximum Security Cargo Tray # TLA7752 is 27-3/4-inches x 24-inches so it will be large enough to handle the generator. The carrier itself weighs approximately 75-lbs. This Tork Lift carrier is USA-made and carries a lifetime warranty from Tork Lift.
  view full answer...

Do you have a question about this Hitch Cargo Carrier?