This durable aluminum cargo carrier is lightweight and rustproof. Long shank accommodates most rear-mounted spare tires. Tie-down holes in the floor and sidewalls let you secure your generator or other gear. Folds up for compact storage.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, Matt with etrailer. If you have a 2023 Ford Bronco and you wanna carry those heavy items like a generator or something you just don't want in the back of your Bronco but you want something that's gonna play nicely with that spare tire, then the Mount-n-Lock GennyGo cargo carrier is gonna be a great option for you. So let's check it out. And to really show you that space in between our spare tire and our generator, even if I'm shaking this a bit, the most of them do is just go side to side. So it's coming nowhere close to that spare tire. I can get a whole hand width in between here, so that's about half a foot, so that's gonna be really nice.
The second main feature that I like about this is just how compact it becomes because this carrier can actually fold 180 degrees, so that shank is pressed against the carrier. And it can stand up by itself, and you can store it really easy in your Bronco as well. What I also like about the carrier is they give you plenty of points to mount your accessories or they use those straps to hold 'em down. So this is perfect for those generators or those more bulky items because if one spot doesn't work for you, you're not only gonna have this wall here, but even in front of the carrier as well. And then, we're gonna have plenty of tie-off points at the base of this too.
But when you are ready to take this off, just keep in mind this is gonna be pretty heavy in some cases because you're gonna have a max weight capacity of 150 pounds. So if your generator or item is pushing that capacity, then this will be quite a lift right here. (hardware clinking) This is a pretty hefty generator. It's nowhere near coming close to 150 pounds, but lifting it up from this height is gonna be a little bit difficult. So you might even need to grab a friend to help you out with this.
(generator thuds) But to give you an exact measurement of how high that lift is gonna be on the Bronco, that is above the sidewall here, that's gonna be about 25-1/2 inches. So remember that is gonna be a little bit of a lift. So if you have a friend and you have a heavier generator on here, make sure you get their help. Now, let's see how close we are to the ground. That's gonna be 23 inches, which isn't too bad.
It's probably gonna drop a little bit. Not to mention, this does kinda flex anyways since it is made out of aluminum. Notice you'll move a little bit inside the hitch tube just 'cause we don't have an anti-rattle device. If that is an issue for you, then I'd recommend checking out some of our anti-rattle collars. You can find those on our website. But like I was saying, this is probably gonna drop down a little bit with those heavier items on here, but you shouldn't make any ground contact. I also just wanna see how close we are to our tire exactly. Now, I said this is about roughly really about half a foot. And that exact measurement is gonna be about 6-1/2 inches, so that's about on par. But for how far it sticks out from that spare tire, that's gonna be about 30-1/2 inches. So really, that's not too bad. But to be fair, this carrier isn't really designed to be hauled around without any items in it. So if you do have a generator or something in here, that's fine. But when you're not hauling anything, it's really easy to fold up and put in your vehicle. And really, to demonstrate how easy it is, I'll just remove it real quick. So you'll just remove your clip and pin. Now, this kit won't come with one. You'll have to invest in one yourself. If you don't already own one, you can find one on our website too. Now, from this point, you're just really taking it out of that receiver. And this will work with your two-inch hitch receivers. (hardware clunks) So make sure you have one of those. And to really put this into the stowed position, we're gonna have this pin and clip at the very back of it. (pin clicks) You just remove that. And then, you're gonna fold the shank 180 degrees until it sits like this. You're gonna line it up with this hole. Push that pin back through there, so it doesn't fold back out on you. (hardware clinking) And then, secure it down. And what's really neat about this is it even stands up by itself. Now, as you can see, it does fold. This is not a tilt or fold feature for driving around. This is mainly just for storage. And then, from this point, really you can just store this in the back of your Bronco because the dimensions of this isn't very large. This is just gonna be 24 by 24 inches. And really, in my opinion, I think this is a great option for what I was talking about earlier. If you're looking for something that is gonna be pretty compact, (door slams) it's gonna be lightweight, easy to move around, and it's gonna work really nicely with your spare tire, I think this is a perfect option for you. Now, if you're looking for something else that works nicely with that spare tire, I think the etrailer cargo carrier is another great option. 'Cause what's nice about that is it's gonna have a higher weight capacity of 500 pounds, and it's gonna be a little bit over twice as wide too. So it's pretty big and bulky. But since it is big and bulky, it's really heavy to move too. You're probably gonna have two people to help you out. And then, trying to store it in your garage, let alone your vehicle, is gonna be pretty difficult sometimes. So that's where I think this really stands out. We're just carrying those additional items for your camping trips or wherever you're going. But that was just a look at the Mount-n-Lock cargo carrier on the back of our 2023 Ford Bronco. I'm Matt. Thanks for watching.
Average Customer Rating: 4.7 out of 5 stars (101 Customer Reviews)
This durable aluminum cargo carrier is lightweight and rustproof. Long shank accommodates most rear-mounted spare tires. Tie-down holes in the floor and sidewalls let you secure your generator or other gear. Folds up for compact storage.Great way to add some extra storage to a RV; in my case a new generator. Solid construction and easy assembly as well. I think the aluminum on top of steel beams (where the stability is needed) adds “some color” too. I opted for the sturdier on top of the bumper installation as I only needed the given 24x24” space of the single try design I ordered.
This cargo carrier is exactly what I was looking for. After checking that my trailer bumper was rated for what I wanted to use this cargo carrier for I pulled the trigger and made the purchase. My order shipped quickly and arrived in the time specified. Assembly and mounting were easy enough once I puzzled out the included instruction card. Some mentioned that the assembly instructions are inadequate, there is a web address for the same instruction card but also on that page is a video that will give you some helpful hints though not thorough since that video doesn't show how to assemble the mounting brackets. However, with a little patience puzzling over the included instructions you will figure it out quick enough. I certainly didn't spend more then 30 or 40 minutes getting my GennyGo mounted and assembled. Sorry I didn't take any photos of my process. Anyway, this 24"X24" 200lbs capacity carrier is perfect for what I wanted - A way to carry my generator without having to load it in the bed of my pickup with our bikes. With this cargo carrier I can secure and lock my generator to the carrier and it's ready to go when we pull into our campground.
Was very pleased with the generator car rier.
Took my 86 lb generator acrossed the country. Did exactly what they said. I love the multiple tie down spots, makes it easy to fasten down my geni and keep it tight.would recommend this product to everyone.
Well made and easy to put together!
Great product, stronger than I anticipated. Fairly easy to assemble. I did have to cut the support arm ends where they go over the bumper so they didn't hit the trailer cab,no big deal.
Happy with my purchase.
I was at first surprised at the diminutive size of the box - but it soon became clear - the utter genius in the design of this product. The tray comes in 4 triangular pieces that allow for a variety of set-ups. I purchased the hybrid model aluminum tray and steel support arms. There were a couple of things in the instructions that seemed vague, but a second and third looked confirmed the instruction (this mainly had to do with the attaching of the steel support arms and extension option - as always one should look through the instructions BEFORE beginning the task). Once assemble everything fit like perfectly and was a breeze to install. Also purchased Item #MO34VR support struts. That product proved to be much more work than the tray, but did work out nicely and is a HUGE peace of mind product, totally worth the work and the price. I have a 24' Jayco Jayflight SLX with a 4" square bumper. After drilling through the frame I can assure you you'll need the struts. Yes the bumper joints are welded solid but the metal is not nearly as thick as it may appear. Thinking "this is gonna take all day", a few seconds after starting the drill on the frame, I was through the other side. Buy the struts if you have a comparable rig.
I have not installed it yet, but I have put it together and everything looks perfect.
Great sturdy product
It’s a nice cargo trailer but it’s too small so it don’t get to use it
Arrived a day late but in good condition
Normally I'm not one to leave negative reviews, but you guys sent me an email so here I am.
To be blunt, I get where they were going with this design but it's not nearly sturdy enough. My generator weighs 134 lb and is a little propane 3000W. It didn't matter how much I tightened to the clamp bolts, this thing was not even close to strong enough to hold the generator. The platform seems like it was acceptably strong, but the means of mounting the platform was terrible. I tried to adapt it with some stronger u bolts but the little struts under the platform couldn't quite handle it either. The metal was thin enough that even with 1 in washers, it's slowly began bending.
After about 2000 miles of stopping every couple hours and screwing with it, I just took it off and threw it away.
Easy to mount, very sturdy. I’ve used it to carry my two Honda generators, or if I know I have power, my portable Traeger and pellets.
Was not what i expected very thin aluminum and the brackets seem very under rated I have a 100lb generator and the directions say this product is rated for 200 lbs
Item arrived on time and components of good quality. The only reason I'm returning 4 stars and not 5 is the abysmal instructions and diagrams - kind of a suck it and see exercise, but other than that, very pleased.
Your product looks like it would do the job nicely. My trailer bumper is another story. It is so lightweight i’m sure it would rip right off and my honda generator would be a gonner for sure. The cost to have a reinforced bumper made would buy a new lighter generator , that would solve my original problem
Works great. Carry my generator on back of camper. Just took a long road trip hit some rough roads at high speed held up great
Purchased this product to hold my generac 3000i generator. Was the perfect size and had enough holes to adequately strap down the generator and gas tank
Easy to install. Just make sure you get the right bolts and nuts for the brackets and not use the tray ones. I carry my small 30 amp generator one it.
We were not expecting the vibration when our generator was running. The entire trailer rattled and couldn't wait to turn it off.
It was awesome received it within 4 days THANK YOU.
With the addition of Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets - 4" to 4-1/2," it securely holds Predator 3500 generator on the bumper of my travel trailer.
Exceptional customer service. The product is well made, easy to assemble, sturdy and attractive.
Simple assembly, took around 30 minutes total. Brackets were both identical (right side only), should be fine but doesn't match the assembly diagram.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.