See what our Experts say about this Firestone Accessories and Parts

• Can 2006 Chevy Silverado 2500 with Lift Install Firestone Air Bag Kit
  Hey Fili, so we do have solutions for air bag kits on trucks that are lifted like yours but it comes down to knowing by how much the vehicle was lifted to pick out the correct spacer. So what is your best solution is to go with a Firestone air bag kit like the part # F2250 and then measure the distance between the Firestone brackets once they are installed. Bracket Spacing (in.) 6.5 to 7.5-inches use spacer # F2536 7.5 to 8.5-inches use spacer # F2366 8.5 to 9.5-inches use spacer #...
  view full answer...
• Will Firestone F2582 Ride-Rite Air Helper Springs Change Ride Height of 2019 Ford F-150
  At the 5psi minimum recommended by Firestone, installing their # F2582 Ride-Rite kit will not change your existing ride height, as long as your suspension isn't worn and is in good working order. If the suspension is worn, it could slightly raise the ride height. Also, you might need a lift spacer depending on how much lift has been added. If the lift is less than 1-1/2 inches, you won't need a lift spacer, according to Firestone. If the lift is greater than 1-1/2 inches, you will need...
  view full answer...
  
• How To Tell What Size Firestone Lift Spacers Are Needed On A Truck With A 6 Inch Lift Kit
  To determine what size lift spacer to use on your vehicle with Firestone Ride-Rite Air Springs, measure the distance between the upper and lower brackets of your air helper spring kit, and whether the kit mounts on the leaf spring or the axle. The spacer needs to be the same length as the amount of lift applied to the axle on which the air helper spring is installed. The axle mount kit would have the lower bracket mounted to the axle. The leaf mount kit would have the lower bracket mounted...
  view full answer...
• Installation of Firestone Red Label Air Bags on 2012 Ford F-250 With Block Underneath Jounce Stop
  Installing the # F2703 on your 2012 F-250 will require moving the block in your picture. However, I'm not sure if it can be moved to the top of the jounce stop since we don't have any information on it and neither did Firestone. I recommend checking with the manufacturer before attempting to move it to the top. The other option is to completely remove it. If you are able to swap it with the jounce stop you can measure to see if a spacer will be required. You will need to measure the distance...
  view full answer...
  
• Do I Need Spacers to Install a Air Bag Kit on a 2019 Chevy Silverado 2500 w/ a 5" lift?
  You will definitely need a couple of spacers to add the Air Lift LoadLifter 7500 XL Air Helper Springs item # AL57538. Most if not all 5" lifts on Chevy trucks are not 5" in the rear because of the rake Silverado's come with from the factory. You most likely need a 3" spacer like item # F2367. The easiest way to tell what size spacer you need is to measure your lifting block. Here are the options for 2" and 4" spacers if your lift is not 3" in the rear. 2" Spacer item # AL52420 4" Spacer...
  view full answer...
• How to Measure To Determine Correct Firestone Lift Spacers for Ride-Rite Kit on 2018 Nissan Frontier
  To determine if lift spacers are needed to install the Firestone Ride-Rite Air Helper Springs # F2558 on your 2018 Nissan Frontier SV 4x4, you'll need to measure the distance between the top and bottom mounting brackets (see photo). Make sure your truck has all four wheels on ground or is up on jack stands and there is no load on the bed. You will then select the right spacer using the following measurements: 6.5" - 7.5" distance between brackets - use 1.25" lift spacer # F2536 7.5" -...
  view full answer...
  
• What Size are the Air Bags for Firestone Ride-Rite Red Label for a 2019 Ram 2500
  For your 2019 Ram 2500 the correct Firestone Ride-Rite Red Label air bag kit is part # F2706. The air bags in the kit have a maximum diameter of 7.52 inches at the widest point, compressed height of 3 inches, and extended height of 8.91 inches. However if your truck is lifted a spacer may be required to make up for the additional height. I have attached a photo of where to measure, and once you find that distance you can choose from the following if a spacer is needed. 6-1/2" - 7-1/2"...
  view full answer...
  
• How to Choose Lift Spacer for Firestone Air Bag Kit on a 2019 Ford F-250 Super Duty with 2" Lift
  The Firestone air bag kits that fit the 2017 Ford F-250 4x4 will also fit the 2019 model year: Standard - # F35FV Red-Label - # F95FV Since you have a lift on your truck it sounds like you need a lift spacer to make the system fit. Firestone has put together a formula that you can use to help you determine what kind of spacer you need. To figure out the needed spacer simply measure the distance between where the brackets would be and choose from the following: 6-1/2" - 7-1/2" - Lift...
  view full answer...
• Correct Lift Spacer for Ride Rite Kit F2299 with 6 Inch BDS Lift
  The correct size lift spacer you will need for your Firestone Ride Rite airbags depends on how much the BDS Lift Kit will lift the rear of the vehicle. If the kit lifts the rear of your truck by 3 inches, then you would want a 3 inch spacer, # F2367. I'm not sure if I found the same kit you are purchasing or not, but in my research I found some BDS 6 inch kits that use a 4 inch lift for the rear. If the kit lifts the rear of the truck by 4 inches, then you would want a 4 inch spacer, # F2370.
  view full answer...
  
• Picking Out Spacer Kit for Firestone Air Bag Kit that Fits 2013 GMC Sierra 1500
  Since not all 6 inch lift kits are the same what you'll need to do first is install the Firestone kit part # F2430 and then measure the distance between the upper and lower brackets of the kit. Distance between top and bottom bracket: 6-1/2" - 7-1/2" - Lift Spacer # F2536 7-1/2" - 8-1/2" - Lift Spacer # F2366 8-1/2" - 9-1/2" - Lift Spacer # F2367 9-1/2" - 10-1/2" - Lift Spacer # F2370 11-1/2" - 12-1/2" - Lift Spacer # F2374 Typically 6 inch lifts require the # F2370 so I'd almost guarantee...
  view full answer...
• Recommended Firestone Air bag Kit For a Lifted 2002 Ford F-350
  The Firestone Ride-Rite Air Helper Springs # F2590 will definitely fit your 2002 Ford F-350 Dually, but the lift will need a few extra parts to get it installed. First and foremost, the stock jounce bumper spacers must still be on the vehicle for installation. From there, you will need to select the correct spacer to coincide with the amount of lift you have on the vehicle like the Firestone # F2366. This does not mean a 2 inch lift uses a 2 inch spacer, however. You will need to go off...
  view full answer...
• Will the Air Lift Air Bags for a 2018 Ford F-550 Cab and Chassis Work With 3.5" Lift
  The Air Lift LoadLifter 5000 Air Helper Springs part # AL57345 which is a fit for a 2018 Ford F-550 Cab and Chassis would work with a lift installed but you'd need to install a spacer to compensate for this lift. The Lift Spacers part # F2367 would work with the above kit and get you within range.
  view full answer...
• Firestone Ride-Rite Springs for 3 Inch Lift on 2017 Ford F-250 with 5th Wheel Bed Rails
  For your 2017 Ford F-250 4x4 with 3 inch lift, the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle - 4WD # F35FV will work with the bed rails and you'll simply want to add the Lift Spacers for Firestone Ride-Rite Air Helper Springs - 3" Spacers - Qty 2 # F2367. Then you can use a compressor like # AL25804 to adjust the springs.
  view full answer...
  
• Air Bag and Spacer Kit for 2021 Chevy Silverado 1500 with 4 inch Lift
  Since you have a 3 inch lift you're going to want to go with a Firestone Ride Rite kit on your 2021 Chevy Silverado 1500 like the # F2609 for two reasons. One being the Firestone bags are best made options out there, and unlike Air Lift Firestone makes a 3 inch spacer with the # F2367 which would be the actual size you need.
  view full answer...
• 3 inch Spacer to Use with Firestone Ride Rite Kit F2597
  The correct 3 inch spacer to use with the 4 inch lift and Firestone Ride Rite # F2597 you have is the part # F2367. The # F2507 is for specific vehicles that have factory lifts and not yours.
  view full answer...
• Can Firestone Ride Rite Kit Install on 2007 Dodge Ram 2500 with 3 inch Lift
  For your 2007 Dodge Ram 2500 with a 3 inch lift you can use the Firestone Ride Rite kit part # F2299 and then since you have a 3 inch lift you'd also need the part # F2367 as well. This is a spacer kit designed to take up the additional space created by the 3 inch lift.
  view full answer...
• Will Firestone Air Bags Fit 1998 Dodge Ram 2500 4X4 With 3 Inch Lift
  Yes, you can use the Firestone Air Bags on your 1998 Dodge Ram 2500. The # F2220 you were looking at are designed for trucks with contact overload springs so make sure that is what you have. With a 3" lift you're also going to need the Lift Spacers for Firestone Ride-Rite Air Helper Springs # F2368. This is designed for vehicles with a 3" lift and from 8.5" to 9.5" between the upper and lower brackets. If you don't have contact overload springs then you need the # F2071 instead. Since...
  view full answer...
• Will the Firestone Ride Rite Air Helper Springs Work W/ a Lifted 2017 Ford F-250
  Yes the springs will work, but you're likely going to need to add a spacer. Just because you have a 3.5" lift does not necessarily mean you'll need a 3" spacer, so you're going to need to install the upper and lower mounting brackets and measure the distance between them. For a 1 1 /4" spacer you'll want # F2536, for a 2" spacer you'll want # F2366, for a 3" spacer you'll want # F2367, and for a 4" spacer you'll want # F2370. Attached is a guide chart that you can use to help you determine...
  view full answer...
• What Size Spacer Do I Need for a Firestone Air Bag System on a Lifted Chevy Silverado?
  I would be happy to help you but there are so many different lift options its going to require you to take some measurements of your Chevy Silverado 2500's suspension. Most lift kits don't lift the same amount in the front as they do the back, so a 3-1/2" lift may only have 1"-1-1/2" of lift in the rear. The most accurate way to tell what spacer is needed is to measure. I attached a photo that shows where to measure, and the size of lift spacer needed. You'll want to make sure that your...
  view full answer...
  
• Recommended Air Bag Kit for a 2018 GMC Sierra 1500 w/ Magna Ride and a 6 Inch Lift
  There is an air bag kit that will work with your truck but since you have Magna Ride the Air Lift item # AL89204 will not. None of the Air Lift kits are compatible, so I recommend the Firestone Ride-Rite Air Helper Springs item # F2430. These air springs have a comparable 4,800 lbs load leveling capacity. To compensate for your 6" lift you will need a spacer and to find out which one you will have to take a measurement. You'll want to make sure that your Sierra is level with all the wheels...
  view full answer...
• Can Firestone Ride Rite Kit be Used with 2019 Toyota Tundra with 3 inch Lift
  Since your 2019 Toyota Tundra has a 3 inch lift on it you'd need to use the 3 inch spacer kit part # F2367 with the air bag kit # F2445 that fits your truck.
  view full answer...
• Recommended Suspension Enhancement for a Lifted 2011 Toyota Tundra
  This will depend on how your 2011 Toyota Tundra was lifted. If it was a body/frame lift, then the SumoSprings # SSR-610-54 will work. This style of lift does not affect the suspension and basically keeps it stock, for the lack of a better word. However, if it was a suspension lift that was done, then they will not fit. This style of lift creates too much of a gap for the # SSR-610-54 to supply any kind of support. That being said, you are not completely out of luck with a suspension lifted...
  view full answer...
• Firestone Airbag Extension for my Toyota Tacoma with 3" Lift Springs
  We have a good solution but the Firestone Axle Bracket Extension Kit for Lifted Vehicles part # F2507 is only for select Tundra and F-150 applications. Instead use the Lift Spacers for Firestone Ride-Rite Air Helper Springs part # F2367 this will give you the added 3' of space you need to keep your airbags in the perfect operating range.
  view full answer...
• Will The SumoSprings SSR-610-40 Fit A 2018 Tundra With 1.25 Rear Lift Shackles
  I spoke to SuperSprings and their SumoSprings Solo Custom Helper Springs # SSR-610-40 may work on your 2018 Tundra, but you will need to measure something to make sure as they are designed for stock ride height. When the # SSR-610-40 is installed, it will measure 6.25" tall. Typically there will be a gap that is anywhere from .25" to 1" from the top of the spring to the bottom of the frame where it will make contact. They said that a gap that is larger than 1", they may not work very well....
  view full answer...