Replaces wireless, hand-held digital controller for Air Lift WirelessAIR compressor system for air springs (AL72000).

Replaces the wireless remote fob for your Air Lift WirelessONE air compressor system (AL25980 or AL25980EZ).

Adapter splits one incoming air line into two outgoing lines or routes two incoming air lines into one outgoing line.

Replaces the wireless, hand-held digital controller for Air Lift WirelessONE compressor system for air helper springs (AL25870).

Monitor and adjust your Firestone Air springs from within the cab of your vehicle with the push of a button. The Air Command establishes and maintains optimal air pressure to keep your air springs safely inflated. Includes a 120 psi air compressor.

Replaces the Electronic Control Unit (ECU) for your Firestone Air Command F3 compressor system (F2581). Compatible with ECU REV 4.0 and remote REV C.1 and C.2.

1" Spacer fits vehicles with raised frames. Center bushing fits a 3/8" bolt.

Designed for heavy-duty or commercial vehicles, this quiet, virtually vibration-free compressor system comes with an in-cab, dual-path controller, allowing you to monitor and adjust the air pressure of 2 springs independently for better control.

This air bag replaces 1 spring in your LoadLifter 57500 XL air suspension system for rear axles.

This kit includes 2 stainless steel air lines to upgrade your Air Lift LoadLifter 5000 or LoadLifter 5000 Ultimate air springs. Braided stainless steel lines are rustproof and more durable than standard nylon lines. Nickel-plated fittings included.

This standard Firestone air spring offers maximum load support and operates at up to 100 psi. The spring has a 1/4" inflation port, a ride height between 5.50" and 7" and a maximum diameter of 7.52".

Inflate/deflate two air springs independently or two pairs equally from your vehicle cab with this pneumatic control switch. Push switch up to inflate bags, down to release air. Panel mounts to vehicle dash and is designed for systems with tanks.

This kit includes stainless steel air lines, roll plates, and mounting hardware to upgrade your Air Lift LoadLifter 5000 or LoadLifter 5000 Ultimate air springs. Braided stainless steel lines are rustproof and more durable than standard nylon lines.

This Air Lift level spacer kit lets you add air springs to your lifted vehicle. These spacers go between the air springs and the mounting brackets, filling the gap between the air springs and your lifted suspension.

Install Ride-Rite air springs on a lifted vehicle with these lift spacers. Spacers attach between the bottom of the lower bracket and the bottom of the air spring on vehicles with a 6" lift. Kit fits air springs that mount on the axle.

This kit is designed to mount your Firestone air tank and compressor quickly and easily to your vehicle. The brackets clamp onto your vehicle's frame and are pre-drilled to reduce installation time.

This kit is designed to attach your Firestone compressor quickly and easily. The included brackets clamp onto your vehicle's frame and are pre-drilled to make installation fast and effortless. Cut installation time with this convenient kit.

Great for supplying compressed air to air helper springs and other pneumatic components, this extreme-duty air compressor works with air tanks with capacities up to 6 gallons. Compressor has a 100-percent duty cycle for uninterrupted use.

This premium Firestone air spring offers maximum load support and operates at over 150 psi. The spring has a 3/8" inflation port, a ride height between 5.5" and 6.5" and a maximum diameter of 6.6".

1/2" Spacer fits vehicles with raised frames.

This Firestone air tank provides a source of compressed air for an air spring system. Tank has 5-gallon capacity, (6) 1/2" NPT ports and (1) 1/4 port. Tank is enamel coated, tested to be SAE J10 compliant and capable of 150 psi.

This air bag replaces 1 air spring in your Ride Control air suspension system.