Are Any Additional Parts Needed To Install Air Springs On A Lifted 2018 Ford F-350
Updated 11/03/2025 | Published 01/12/2025 >
Products Featured in This Question
Question:
I have a 2018 lifted f350 xlt superduty 4x4 long bed and want to put the 7500xl bags on it. Do i need anything special because its lifted 6in? As well as an on board compressor and the BandW gooseneck hitch.
asked by: Michael
Expert Reply:
Hey Michael,
A 6" lift doesn't always equate to a 6" spacer so you'll need to measure the distance between the mounting brackets to determine the correct lift spacer:
Between 6-1/2" and 7-1/2" # F2536
Between 7-1/2" and 8-1/2" # F2366
Between 8-1/2" and 9-1/2" # F2367
Between 9-1/2" and 10-1/2" # F2370
Between 11-1/2" and 12-1/2" # F2374
The Firestone Airide Red Label Extreme Duty Air Helper Springs # F95FV would be the correct kit for your 2018 Ford F-350 and would be compatible with the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1116 you were looking at for your truck as well.
For the air compressor you'll need one that can go up to 150psi like the Firestone # F56VV (Single Path) or # F96VV (Dual Path). Both of these compressors will come with a remote as well as a Bluetooth app to monitor your psi levels and adjust them. The dual path compressor would be a good option if you plan on hauling uneven loads in the bed that could make one side sag more than the other.
Since you're adding in a gooseneck hitch an in-bed 7-way # 41157 would make it much easier to plug in your trailer's connector if you don't already have one.
Let me know what you think and if you still have questions or any other preferences I'd be happy to help.
Product Page this Question was Asked From
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Gooseneck Hitch
- Below the Bed
- Flip-Over Ball
- 7500 lbs TW
- 30000 lbs GTW
- Wheel Well Release
- Spring-Loaded Loop
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media





Continue Researching
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Q&A: Is There A Soft Start For The Dometic FreshJet 5 With Heat Pump FJX5557EHPWHCS?
- Q&A: How do I Know if I have the OEM Prep Package (Puck System) in the Bed of My Truck?
- Q&A: Aftermarket Puck Kit Recommendation for a 2022 Ford F-250 Super Duty
- Q&A: Do You Know the Difference Between a 11033 Hub and My 11033L Hub?
- Q&A: Is Drilling Required to Install Pace Edwards Full-metal JackRabbit Hard Tonneau Cover
- Q&A: Recommended B&W Turnoverball Underbed Gooseneck Trailer Hitch for a 2019 Ford F-250
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Holiday 2025 | Best Gifts for Towers
- Article: Trailer Wiring Diagrams
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: How to Measure a Trailer Axle



Jameson C.
11/3/2025
Hey Michael, how did things go with the Firestone air bags and lift spacers on your lifted F-350? Did the compressor setup give you the control you were looking for when hauling with the B&W gooseneck hitch? Your update could make it easier for others working with a similar lift.