Standard A-frame coupler is constructed of durable steel and features a traditional, easy-to-use trigger latch for quick and secure hookup.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the A frame trigger latch coupler with the black powder coat finish, for a two inch hitch ball. This A frame coupler will let you hook up your trailer to you tow vehicle, provide you a connection point for the hitch ball. Now this uses a trigger latch design, which allows for safe and easy coupling and uncoupling of your trailer to the hitch ball. Basically you just put your finger on the trigger latch right here, pull up on it, then pull up on the latch itself, and that'll open up the ball socket underneath. Basically the way to install it, I happen to pull here a two inch diameter hitch ball. Basically you just drop it with it in the open position, you drop the coupler right on to the hitch ball, and then just fully completely close your trigger latch. As you do that, the trigger latch will actually lock into place right there, and then you're all attached, ready to go.
If you want to, the hole right here will allow for a coupler lock to go through, for extra security. To release it, just pull up on the trigger latch, lift the latch up and it'll release it from the hitch ball. This is made of a sturdy steel construction, has a nice black powder coat finish, to provide corrosion resistance. It is an A frame design, so it is designed to mount to a fifty degree trailer tongues. It is a weld-on installation, it is also SAEJ684 certified. If you notice the hole here in the back, that is your built-in jack attachment point, allows for quick, easy mounting of a round utility jack.
The hole diamter right there, I'll put a measurement on it for you, it's going to be right at two and a quarter inches. You also notice there's three threaded holes right here for installation of the jack, so it will require three, three eighths by sixteen inch sized bolts for installing your jack to this. Again, this is designed to fit a ball size of two inches, total weight capacity on it is five thousand pounds, tongue weight capacity is seven hundred pounds. The pinhole diameter right here, which is designed for the coupler lock is five sixteenths of an inch, and just to give you some overall dimensions, the width from edge to edge is going to be right at ten inches. The length from this end to this end is going to be right at thirteen and three eighths inches long. That should do it for the review of the A frame, trigger latch coupler, with the black powder coat finish, for the two inch hitch ball..
Average Customer Rating: 4.9 out of 5 stars (80 Customer Reviews)
Standard A-frame coupler is constructed of durable steel and features a traditional, easy-to-use trigger latch for quick and secure hookup.Fit right up. Heavy duty!
just what I needed to fix my trailer
I have be buying my trailer parts from etrailer for the last 5 trailers
and I'm very pleast with the secvice and products
Quality All around! Welded up beautifully on my trailer. ????
Only intermittant use, but coupler still working well. Just one word of advice, if you are going to use it on a trailer that is going to be pulled by an ATV, the location of the hole for the trailer jack ends up making the trailer jack too close to the back of the ATV, where I can't put the coupler on the ball on the ATV. I was able to solve this by getting an extension piece (basically part C45006) for my ATV to move the trailer back a bit from the back of the ATV. This would be a problem with any A-frame coupler though.
fast shipping great stuff
I purchased items to build 2 complete trailers, including axles, springs, hitches, lights and wiring etc. The service was outstanding! The items were delivered on time and correctly.
I was also quite surprised with their very good pricing. In total, my items weighed in excess of 200 lbs., and yet I spent less having these things shipped to California from this company than I would have at my local area stores.
Without doubt, I will use this company again when I need these types of products.
It might be possible to give 5 stars but after purchasing all the products about a year ago, my little fiberglass trailer is not even close to being ready. All the lighting is hooked up and they all seem to work, so that's a good thing. The other products that I purchased have not been installed yet.
I would like to mention how pleased I am with e-trailer videos showing everyone how their products look and how they're used. Keep it up, I am a happy customer.
Vic
The coupler that came with my trailer was slightly misshapen, causing a back and forth jerking motion within the tow vehicle. We ground off the old one and welded on this new one - problem solved! I especially like that the mechanism on this coupler is both adjustable and easy to hook up and unhook.
I just used the handle and the internal parts but the price was not bad and the shipping was not that expensive. I was quoted $85.00 and Shipping and headlining from the local RV place at $100.00. After paying $18.95 and shipping of around $9.00. Now I can go on my next camping adventure after saving $72.00. I even called e-trailer and the lady was very helpful and very friendly. In the future I will be doing more business with e-trailer. Thanks.
i purchased 3 A-couplers. I was very pleased with the transaction as a whole. The shipping was "free"! How can you not like that's? Would reccomend and encourage others to purchase etrailer products!
A happy Customer,
Gary H.
The product was exactly as described. The fit and function are excellent, the price was good and so far the hitch has worked perfectly.
Great stuff to work with. Pallet racks and etrailer parts
I dealt with Chrystal; very helpful and professional. The trailer parts arrived promptly and in good condition. I would buy from etrailer again. Today I ordered steel and will begin building a 5X8 utility trailer.
etrailer always comes through. Their customer service is second to none.
Work great and fast shipping
I will come back if I need more trailer parts.
This item is exactly what I wanted and the price was very inexpensive. Also, even though I asked for standard UPS shipping, it showed up the next day. What a great experience with etrailer.com!!
Have used the trailer on 3 road trips between San Jose Ca and Reno NV over the path year and have no complaints.
The coupler was very nice! We love you prices. There was fast shipping. Will buy from you again!
The hitch is exactly as pictured. It strong enough to hold up, and it was shipped quickly. I am happy with the purchase.
Solid and well crafted. A much better choice than sanding and repainting the old coupler. Thanks e-trailer!
Service was excellent throughout product order process. Product was high quality, fit perfectly for welding and was priced lower than comparable brands.
Product was exactly what I needed, thanks so much for prompt shipping and excellent service.
I will continue to use E trailer in the fuutre.
Billr
This is a great replacement piece at an extremely affordable price. The hardest part is getting the old one off! Make sure you have good welder install this for you!
Haven't completed trailer yet.
Do you have a question about this A-Frame Trailer Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.