Tongue Angle of the A-Frame Coupler Part # CA5100B
Updated 12/04/2017 | Published 12/01/2017
Question:
WHAT IS THE TRAILER TONGUE ANGLE
asked by: Tony S
0
Expert Reply:
The A-Frame Coupler with Black Paint Finish part # CA5100B works with a-frame trailers that have a tongue which comes together at a 50 degree angle (Industry Standard). This coupler will attach to a 2" hitch ball and has a 2-1/4" diameter pilot hole for trailer jacks.
I have attached a photo of the coupler angle for you as well.
expert reply by:
Conner L
0
click to enlarge
Product Page this Question was Asked From
A-Frame Coupler with Black Paint Finish - 2" Ball - 5,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- 50-Degree Frame
- Weld-On
- 5000 lbs GTW
- 2 Inch Ball Coupler
- Trigger Latch
- 2-1/4 Inch Hole
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 72~10~2
- Search Results: 13~44
- Shop: Equalizer Suspension Bolt - 5" Long
- Shop: Dexter 6-Leaf Slipper Spring for 9,000-lb Trailer Axles - 30" Long
- Shop: LED Trailer License Plate Light with Chrome Housing - Submersible - 2 Diodes - Round - White Lens
- Search Results: nilight
- Search Results: vault hubs
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Q&A: How Wide are A-Frame Trailer Couplers CA5400 and CA5100B
- Shop: Dexter Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: Equalizer for 2" Wide Slipper Springs - 23-1/2" Long - 1" Center Hole
- Shop: Fifth Wheel Hitch
- Q&A: Replacement Dexstar Trailer Wheel with 17-231 Sticker
- Q&A: Correct Bearing Kit for a Curt 5,100 lbs Axle
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Q&A: Replacement for Shelby 5101 Coupler
- Q&A: Does The Bumper And Grille Need To Be Removed To Install A Base Plate On A 2025 GMC Canyon AT4X?
- Q&A: The Function of the Auxiliary 12-Volt Connection on the 7-Way Trailer Connection
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed To Switch Trailer From Standard Ball Coupler To Pintle Hitch System
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Double-Eye Trailer Suspension System Review