To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Heavy-duty 5th-wheel trailer hitch has interlocking jaws, a torsion head, and a color-coded lock indicator for safety and security. Non-binding slider ensures proper clearance during slow turns. OEM adapter rails included.
Features:
Specs:
Unlike slide-bar models, the rounded, interlocking, two-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
Get peace of mind with Curt's color-coded lock indicator. Just look at the indicator - either the one on the handle or the one on the hitch itself - to determine whether the jaw is in the correct position to uncouple (red), couple (yellow) or tow (green).
Most often used on trucks with 6' and 6-1/2' beds, this slider helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a slider to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody It's AJ with etrailer.com. Today we're gonna checking out via Curt Adapter. Now it's for OEM puck systems in the bed. So it's gonna take the underbed puck system make it a overed puck system. That way you can attach your fifth wheel to this and use the one you have already. Let's check it out.
It's gonna be really good if you already have a fifth wheel that you used in roller truck, you wanna transfer it over to this system. It doesn't drop in the puck, or you just wanna upgrade to a different one that also works above bed. That's what this is gonna do. It's gonna convert the puck system to an above bed system and you just drop it in any of these tabs here right away. I wanna show you how easy it is to operate.
So I'm gonna pull the clip and the pen. This is a lever that's gonna turn this portion to let you lift it up and outta the pucks, and I gotta do it on all four sides, but it's really easy to do compared to some of the other adapters I've worked with. There was the Reese one that I've also used but it has the longer arms that pin here in the center and that can be kind of cumbersome to bring those all the way out here and out of the way to unlock it from the pucks. These are shorter handles, so you just push it out makes it far easier. It does clear everything right here.
You don't have to go for that long lever style. So now it's unlocked. I can just lift it up and out of the pucks. It's like our back one's stuck, so I gotta get that lever in the right spot, that easy to do. Now it's up and out of the pucks and we can take it out of the truck.
Installations just as easy. Make sure you got those levers in the correct spot. You see that this portion that goes down into the puck is lined up with it. You just lift it up. Drop it in. Now you might only get one or two of them in. Then you can come over here and adjust. Very easy to come down. I also like that there's plenty of room in between the bend and the bottom of the bar so you don't have to worry about smashing my hands when I'm dropping into place. Once it's lined up in place, you can pull the lever back over. It should go over there. That's gonna lock it in and then we'll put our pin and clip right there in the hole. The way it locks in those pucks is gonna help prevent chucking. I'm gonna try and shake it back and forth. You see it'll move a little bit, but not a whole lot. I'm really shaking the whole truck versus what's gonna move on the fifth wheel, the whole thing has a durable carbate black product oak finished. So if you leaving it in the back of the truck you don't have to worry about the elements bothering it at all. The tabs where you drop the fifth wheel legs in so this is gonna be what kind of fifth wheel spread will work with the adapter. It's gonna go from the furthest ones out. It's gonna be 29 inches center to center. The next one's in it's gonna be 21 inches center to center and then here's gonna be 10 inches center to center. So that should help you decide if your setup's gonna work with the adapter or not. Another thing to think about about is it is gonna add three inches to the bed so that means it's gonna bring your fifth wheel head up three more inches. Just keep that in mind when you're doing your setup. Overall, I really like this adapter. Like I said, it was easier to use than some of the other ones I have used. These quarter turn latches here and drop in the pucks. Make it really easy to get in into place or get it out of here when you want it out and it's gonna help convert that underbed system to an over bed system to using over bed fifth wheel. Well. I think that does it. Thanks for hanging out. I hope this helps..
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.