Heavy-duty 5th-wheel trailer hitch has interlocking jaws, a torsion head, and a color-coded lock indicator for safety and security. Non-binding slider ensures proper clearance during slow turns. OEM adapter rails included.
Features:
Specs:
Unlike slide-bar models, the rounded, two-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
Get peace of mind with Curt's color-coded lock indicator. Just look at the indicator - either the one on the handle or the one on the hitch itself - to determine whether the jaw is in the correct position to uncouple (red), couple (yellow) or tow (green).
Curt's unique spherical axial bearing provides a durable pivot point that allows easy, 360-degree movement of the hitch head. This ball joint is designed for smooth, quiet operation with less clunking and chucking.
Most often used on trucks with 6' and 6-1/2' beds, this slider helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a slider to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, it's Brad here at eTrailer and today, we're taking a look at the Curt Adaptor Rails for 5th Wheels. Now, this is gonna work for the OEM prep package that we have here on our 2023 Chevy Silverado 3500. The puck system or OEM prep package, as they call it that a lot of newer trucks are seeing are really nice because you can simply drop in a 5th Wheel, but, if you already have a 5th Wheel and it's not compatible, it's normally in a rail system. Well, you can pick up this adapter to make that fifth wheel head work. Now, these are standard rails as far as the industry goes so it's gonna work with most 5th Wheel heads. The only one that really has compatibility issues, is gonna be the BMW Sliding Companion and that's just because of the clearance as it slides.
But that really opens it up to whatever 5th Wheel you may have or be looking at and still be able to hook this up. Now, something to keep in mind, this is gonna add height to the overall height of your 5th Wheel while in the bed, about two and a half inches. So, just something to keep in mind when adjusting your 5th Wheel and checking your trailer to make sure that it lines up perfectly. Now, while we have this on a Silverado it's also gonna work with GMC trucks. So, your Sierras are gonna work perfect as well, but also it has the adjustability to be able to work with the Ford ones, which you sit a little bit wider.
So, if you ever plan on getting a different truck and you still want to keep your same 5th Wheel you can adapt this and drop it into those OEM prep packages. (metal scraping) The handles just lock this into the puck system pretty easily. So, these will just unlock by sliding these out. (metal clanking) (boot thumping) And the great part too is there is some adjustability. So, not all prep packages fit exactly the same little bit of tolerance differences, but with our castle nut and cotter pin system here, we're able to actually adjust it to where you have that perfect tolerance.
Now, the black powder coat finish is gonna be nice, especially if you plan on leaving this in the bed especially uncovered, because that will hold up long term. Keep this from corroding or rusting at least give it a fighting chance for that. Now, this is a pretty heavy-duty kit rated at 25,000 pounds. So, while this is pretty heavy-duty, you also wanna make sure that you're checking the vehicle to make sure that it can handle the weight, and also you're only as good as your 5th Wheel. So, between all of those three components take the lowest of those numbers so you stay safe.
Now, this is pretty easy to assemble. It's pretty straightforward and can be done about 15 minutes with minimal hand tools. So, let's take a look at that so you can get yours installed. Gone ahead and laid out my parts and that way we can start assembling this. And it looks like, as far as tools go, it's gonna be pretty simple. A 3/4 inch socket, a 15/16 socket, a torque wrench, and a plier for our cotter pins. So we're gonna start here on the left side and I've just laid these out. So you'll see that one edge goes all the length of it. That's gonna be the inside of our rail. So, the way I have it laid out is the way that it's going to sit once we have it mounted up. We're going to slide over our spacer and you'll see that one side is gonna be thicker than the top side here, as I have it laid out. So, we'll slide, (metal clanking) we'll have the larger portion down here by the head of our bolt. This is going to fit right here. (metal clanking) We're gonna grab our side-specific handle, and you're gonna know that it's the proper one. You want the handle kind of to where this top portion faces or is at the same height here of our rail. And, there's this little notch that's our stop. So you should be able to move this, and this will kind of go in this center portion, that whole line up. Now, if it's not able to move, then you're gonna wanna swap that handle to the other one, and then we'll finish this up with a flat washer and our castle nut. I'm gonna go ahead and get this threaded down. And you don't wanna go too crazy here. I just hand did that. And so you still want to have some mobility here so you can kind of, loosen it up a little if you need to. (metal scraping) You wanna be able to slide this pretty easily and if you crank it down, you're gonna lose that. So, we do need to align it with the hole in the bolt. So find that sweet, happy medium of being able to move the handle, but still get your cotter pin through. So, I'm gonna go back one here And I'm happy with that. So, we'll go ahead and grab our cotter pin. (metal scraping) I may have to turn this here, but we'll feed this in and then pry out our ends, and that way it's gonna hold that in place. So, normally just a set of needle nose here will work well. Slide this down (hands tumbling) (metal clinking) and then as we bend both ends back, that should lock it in place. So with this one in place, we'll just go ahead and repeat for the other remainder ones again. Just making sure that our handles are able to actuate. Now, if you have your puck covers, you're gonna want to go ahead, take those out, and we're gonna drop this in. So with my handles kind of at a 90 here from our rail (metal clunking) we'll go ahead and get these tightened down (metal scraping) and then we'll align this hole here. And then we can put our linchpin in place, (metal clanking) and we'll just snap this in place. And then we'll go ahead and get our other side in as well. So now grab one of your rails, and you'll see the slots here for the 5th Wheel. You want that facing towards you. And then we'll line this up. (metal clunking) And on the GM trucks they're gonna be using the third and fifth hole. It should line up pretty well centered so you should know you have it in the right spot. We'll then take our carriage bolts and pass it through. (metal scraping) (metal chinking) Now in getting these in, if the tolerances are pretty tight and it's not wanting to pass through perfectly. What you can do is take that linchpin off. I loosen this side up and you're gonna want to get your outside ones in first. And that should align the middle ones a little bit better because if you do these two first, you might be a little bit off here. (metal clanging and scraping) Now once we have both of our rails in the front and back with all the carriage bolts passed through we'll go ahead and take our serrated flange nuts, and I'm gonna just hand tighten these on for now. (metal screw scraping) So, now we're gonna come back with our 3/4 inch socket and using the torque settings found in the instruction manual, I'm gonna torque all of these down properly. (socket crunching) If you need a torque wrench we have them available here at etrailer. You can generally go to an auto parts store and rent one for free. (socket crunching continues) Now, we'll just go ahead and repeat for the remainder of the hardware. So, you can see I have my Curt E16 5th Wheel that we just dropped into the rails, and I can go and grab a different 5th wheel and do all the same. All that's left to do is pin it in place through the rails and then we're ready to hit the road. And that was a look at the Curt Adapter Rails for OEM prep packages on a 2023 Chevy Silverado 3500.
Like some other posts, followed instructions to the letter and hitch would not drop into rails. Loosened all the rails bolts, mounted hitch, and re-torqued everything. Puck mounting brackets were just off square a bit and twisted the rails when first installed. Either square ‘em up or alter instructions so it goes in first time. Installed in a 2022 Silverado 2500 6’10” bed. Loved the plan, set the rails first time in a few minutes (instead of waiting in a shop for four hours while someone else did the boring and cutting and such). Hitch has been in two other trucks with conventional rails and always fit. Coulda been a five star, but I am familiar with Curt and feel sure they will get it right.
Purchased a 2024 Silverado 3500 set up for 5th wheel with the PUCK connections. My previous truck had ISR rails and the PullRite SuperGlide 5th wheel hitch. The Curt adaptor is the perfect solution to avoid buying a whole new hitch.
The package arrived in good condition and on time. Upon opening the box I was extremely surprised how well it was packed, each corner had a metal bracket, there was a piece of plywood on the bottom and top and foam separating the parts.
The install was fairly easy, read the instructions, Chevy is one way, Ford another. The PUCK locking mechanism make a nice tight connection with very little adjustment needed. The rails fit in nicely and the bolts went in well, torqued as required.
I have not yet attached the PullRite hitch but if it fit the Curt ISR rails on the previous truck it should fit this one. With the Chevy 2500 I had, between the squat and ISR rail setup the 5th wheel was slightly lower in the front. With this Chevy 3500 suspension and the adaptor being about 2" higher I expect the camper to be level or slightly higher in front which works.
Very nice adaptor if you have the need, better than changing out a perfectly good hitch.
Incredible fast shipping. Very easy installation. And all went together as it should. Some of the YouTube I seen said bolts were hard to get in place so I was prepared for it but to my delight all fit perfectly and it came mostly built with puck handles already built. All I did was attach cross bars. Very happy with everything so far but haven't towed on it yet.
It was very easy to assemble and install. Maybe 10 minutes because I had to grab a wrench. It was also in question if it would work with other brands and in my case no problem working with my Reese hitch. It as able to email correspond and have my questions answered very quickly.
Really wanted to give this 5 stars but it appears they didn’t try it with a hitch like mine. The flanges on the cross supports do not allow my hitch to seat down onto the support tubes. Thus the hitch holes will not line up with the tube holes and the pins cannot be inserted. I fixed it by taking a sledge hammer to the ears on my hitch until the holes aligned. I shouldn’t need to do that to something this expensive.
This rail adapter work like i wanted it to. Saved us from having to purchase a New 5th hitch
Have not gotten to tow yet but everything went together fairly easy. One major disappointment was the shipping and the packages were dumped in my driveway. Also it was not clear if I should use the spacers on this while installing the A16 hitch. I tried to get them to fit but could not get the pins to fit so I removed the spacers.
The Curt A25 5th Wheel Trailer Hitch with S25 slider worked perfectly on my 2024 GMC Sierra 2500HD Denali. Install was a breeze. Great pricing as well at etrailer.com.
Great product. Bought a new F250 with puck system and this product adapted my hitch to the puck system. I did have to drop the head of my hitch because the adapter raises it 2.5 inches. Feet on my Curt A16 fit right into the rails on adapter.
After purchasing a new truck, I needed an adapter for the Chevy puck system without buying the entire 5th wheel hitch, this fit the bill. Heavily built and easy to install. The only thing I would recommend is to use larger cotter pins because the ones that came with assembly would not engage the castle nuts.
Bought a new truck with the factory puck system because I wanted a full bed floor, so this was needed so I could use my 5 th wheel hitch
It fit perfectly in my F250 Super Duty, had to adjust the lugs that go into the bed that was easy, my hitch fit no problem, haven’t hooked the fifth wheel up yet removed it to check the ease worked great
Three of the locking handles were found to be really loose and not finger tight. This will allow the bars to rock back and forth. Causing the hitch to move around.
This is really poor for a hitch adapter that should be tight.
Easy install! Fits perfect! 2024 Silverado 2500. Still had room to close the hard cover.
Kim was fantastic. My 20000 husky 5th wheel 15 years old fit right in the rails. That was our only concern.
Packaging was the best I have ever seen. Thanks Kim and e-trailer for the curt puck system adapter for my new 2024 denali 3500.
Assembly and setup was super easy and quick. Seems super stout. I was worried the added 2 1/2 inches of height added by this would require some adjustments to the pin box. However once hooking up my trailer, no adjustments were necessary. Trailer is almost spot on level, and I am still maintaining 6.5-7 inches of bed side clearance to the trailer.
This is definitely a quality part. I've had it a year, easy to swap between my fifth wheel and gooseneck plate. It installs or comes out easily, it fits securely in my 2023 Silverado 3500. I've pull all of the 25000lbs it's rated for without issue. I highly recommend it. It allowed me to use my fifth wheel and gooseneck plate from my old truck that had rails in it.
Easy assembly, fit well. Works just like it should. Put the hitch at a good level to level 5th wheel.
Easy to put together, good quality parts, went right into the back of the truck just like it was supposed to. The BW 5th wheel hitch that I had matched right up. I did have to lower the plate 1 bolt hole but that was no big deal. Overall I am very satisfied with this.
Easy to assemble and install. Love that it snaps into the puck system in the truck bed and allows me to remove the entire hitch using an electric hoist, easily.
One half hour after UPS dropped off the rail kit, the Reese hitch that was in my 2018 GMC (drilled rails) was in my new 2024. Only minor issue was adjusting the tension of the locking bolts.
I purchased a new GMC and didn't want the rails in the bed of my pickup. This worked great with the 5th wheel hitch that I had.
Arrived on time. Well packaged and easy installation
Very easy install just as described allows me to use same fifth wheel in multiple vehicles.
Lightweight and easy to connect the crosswing to.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.