Is this right for you? Product Expert Kathleen M says:
Yes, if you:
Get nervous that someone might be in your blind spot when changing lanes or going around tight corners
Are unsure about wiring stuff yourself and want the quickest, easiest setup, especially if your rig is pre-wired for Furrion
Have a pretty cozy cab where a small, out-of-the-way screen will fit
No, if you:
Only need a rear camera to keep track of traffic or to keep an eye on accessories in your hitchÂ
Often power wash your rig and need a camera with a better seal to keep the camera from fogging up
Wireless backup camera system has 3 waterproof cameras with night vision - 1 rear camera and 2 side marker light cameras with motion detection minimize blind spots and help prevent accidents. Touch screen, anti-glare monitor displays up to 4 cameras. Lowest Prices for the best rv camera system from Furrion. Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen part number FCE48TASL-05 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
All Info
Reviews (385)
Q & A (70)
Related Parts
Photos
Why etrailer?
Furrion RV Camera System
- FCE48TASL-05
Backup Camera
Observation Camera
5 Inch Display
Furrion
Side Marker Lights
Wireless Signal
Touch Screen
Anti-Glare
Mirrored Image
Night Vision
Motion Detecting
Waterproof
Dashboard Mounting Bracket
Suction Cup Mount
120 Degrees
Wireless backup camera system has 3 waterproof cameras with night vision - 1 rear camera and 2 side marker light cameras with motion detection minimize blind spots and help prevent accidents. Touch screen, anti-glare monitor displays up to 4 cameras.
Features:
Marker light cameras replace your clearance lights to improve visibility and obstacle detection for your RV or camper
Minimize blind spots on both sides of your RV and help prevent accidents
DOT compliant, waterproof marker lights with detachable cover allow easy access to replace your bulb
CMOS sensors create high-quality digital video in full color
Gives you a 65-degree viewing angle
12 Infrared LED lights on the camera's housing provide night-time vision up to 39'
Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
Durable, metal construction is dust resistant and waterproof
IP65-rated to protect against dust and low-pressure water jet spray
Wireless backup camera system improves rear-view visibility and obstacle detection for your RV or camper
Minimizes blind spots and helps prevent accidents
Camera with CMOS sensor creates high-quality digital video in full color
Gives you a 120-degree viewing angle
Features a built-in microphone to pick up audio
Motion detection triggers monitor to power on
LCD auto-off setting lets you set your monitor to power off after 10, 20, or 30 seconds
8 Infrared LED lights surround the camera lens to provide night-time vision up to 16'
Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
5" Full-color LCD touch screen monitor shows a mirrored image for a precise view from the driver's perspective
Auto-dimming, anti-glare screen let you view the display in any lighting
Rear assist marker lines show distance from other objects
Brightness, color, contrast, and image orientation can be easily adjusted
Speaker projects audio sent from your camera
Quad screen displays 4 camera angles simultaneously
Built-in digital transmitter eliminates interference from other devices
Offers high-quality, uninterrupted video up to 492' away
2 Different mounting options allow you to display the monitor
Tabletop mount designed with 4 non-slip pads to sit on your dashboard
Suction cup mount secures to your windshield or dashboard
Durable, metal construction is dust resistant and waterproof
IP65-rated to protect against dust and low-pressure water jet spray
Simple installation - minimal drilling required
Mounting hardware included
System can be used as a backup camera or for observation
Wire to reverse lights for backup camera
Wire to running lights for observation
Specs:
Side Camera overall dimensions: 5-1/2" wide x 3-1/4" tall x 1-5/8" deep
Mounting hole spacing:
Vertically (left side): 1-1/8" center to center
Vertically (right side): 5/8" center to center
Diagonally: 3-1/8" center to center
Resolution: 720 x 480
Voltage: 12V - 24V DC
Wire length: 7-1/2"
Monitor dimensions: 5-5/8" wide x 3-3/16" tall x 1-3/16" deep
Screen size: 5"
Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
Mounting hole spacing:
Horizontally: 3-3/4" center to center
Vertically: 15/16" center to center
Tabletop mount dimensions: 3-5/16" wide x 3-1/4" tall x 4-5/8" deep
Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
Resolution:
Monitor: 480 x 272
Camera: 720 x 480
Wireless range: 492'
Voltage: 12V - 24V DC
Camera cable length: 6'
1-Year warranty
Marker Light Side Cameras
The marker light side cameras are the ultimate upgrade for your RV's side marker lights. They give you the same DOT compliant marker lights with the added benefit of waterproof side cameras with LED night vision and motion detection. The cameras enhance visibility and minimize blind spots by giving you a wide 65-degree viewing angle. They also have detachable light covers for easy access to replace your bulbs.
Infrared LED Night Vision
The 8 infrared lights on the rear camera and 12 infrared lights on each side marker light camera produce a clear, quality picture. They give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.
Camera with Built-in Microphone and Monitor with Speaker
The built-in microphone on your camera is the perfect tool for backing up your RV. The microphone allows a friend or family member to relay information and instruction to you through your monitor's speaker, providing peace of mind as you work together to safely maneuver your RV.
Rear Assist Marker Lines
No more wondering if you're getting too close to that other vehicle. The rear assist marker lines take the guesswork out when backing up. This helpful tool displays reference points of objects within your view to avoid collisions and safely maneuver your RV.
Motion Detection
The motion detect feature allows you to set the motion sensitivity level of your cameras to low, medium, or high. On the low setting, your cameras will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, they will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.
Auto-Off
The auto-off setting is a great power saving option. Working in conjunction with the motion detect setting, this feature allows you to limit the amount of time your monitor stays on. Once motion is detected, you can program your monitor to power off after 10, 20, or 30 seconds of inactivity. The LCD auto off option will only power down the illuminated screen while keeping the monitor on.
Quad Split or H Split Display
The quad split or H split display allows you to view up to 4 camera angles at once (additional camera sold separately). Depending on your camera setup, you can view blind spots behind your RV or on each side of it while driving down the road or backing up.
FCE48TASH Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
FOS05TASF Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen
Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen - FCE48TASL-05
Average Customer Rating: 4.7 out of 5 stars (385 Customer Reviews)
Wireless backup camera system has 3 waterproof cameras with night vision - 1 rear camera and 2 side marker light cameras with motion detection minimize blind spots and help prevent accidents. Touch screen, anti-glare monitor displays up to 4 cameras.
- FCE48TASL-05
by: James01/19/2021
The customer service with etrailer was very helpful with my order. The products arrived earlier than expected as well. The install was fairly simple. Only issue I had was the passenger side camera/marker. The factory cable to the marker was very short so a little difficult to install, otherwise it was very simple and straight forward.
939791
We love the back up camera and the 2 side cameras we recommended this product It makes backing the camper really easy
924907
- FCE48TASL-05
by: Don06/17/2020
Products were delivered in adequate time considering the COVID epidemic slowed every thing to a craw. I was not able to place side cameras in same place/wiring as running light so I had to run additional wiring, but was not a problem. The observation camera came already paired. The side cameras paired up instantly and easy once we figured out we had to press harder on the camera pair button. All in all we are very satisfied with the equipment and the service from etrailer.
816534
- FCE48TASL-05
by: Terry09/17/2020
Nice product but should have the largest 7" monitor for better viewing. The cameras paired quickly and easily. Side and rear cameras were simple and easy to install in under an hour.
882629
- FCE48TASL-05
by: Debbie01/25/2021
camera was a easy install for back, gonna have a friend help me install sides this week.
so far it looks like a good system
943176
- FCE48TASL-05
by: Jeff01/25/2020
just set up today,rear camera works in stationary position ,have not tried on the road yet. Our rig is 38'plus and my chevy dually is long also .this is replacing a 4.3 screen vision 1 which stopped working after getting banged up from a race deck . Good pic so far 55 - 60 feet away
744820
- FCE48TASL-05
by: Richard09/01/2020
The units are compact, look nice and were easy to install! Great product, so far!!
872411
- FCE48TASL-05
by: Benoit06/16/2021
1066936
- FCE48TASL-05
by: Joe08/06/2021
1116124
- FCE48TASL-05
by: Robert09/22/2021
1159246
- FCE48TASL-05
by: Peter02/19/2021
961700
- FCE48TASL-05
by: David09/19/2021
1157472
- FCE48TASL-05
by: Jay07/28/2021
1107477
- FCE48TASL-05
by: William03/12/2021
982060
- FCE48TASL-07
by: Pete03/25/2020
Review from a similar Vision S Wireless in RV Camera System
Have not been out on the road yet but the install was easy even for a novice like me. My reflection 5th wheel was prewired so it was a plug and play for the rear camera. For the side cameras I used the two screws from the previous light. I put both screws in the top holes, (one behind the camera) as that seemed to secure it better then bothe screws not behind the camera. Instructions were a bit limited(or I didn't read them) on the side camera sync but I pressed enough buttons to figure it out. Picture looks great. Do watch for obstructions such as awning supports which will limit view. I also used silicone to keep the water out.
770356
I find that i use the rear camera much more than the side cameras so i question whether i would have bought the side cameras again. The rear camera would cut in and out on the highway so I added a longer antenna and you have to make sure both antennas are straight up and down to get the best signal. All in all i get a good view behind the 35ft trailer and would buy the rear again.
Pete - 03/26/2021
110415
- FOS07TASF
by: James09/12/2020
Review from a similar Vision S Wireless in RV Camera System
Haven’t had long but I really like it, bought this to go on my enclosed trailer because I go into areas that I need to turn around which requires backing up and some are really tight and the way I turn I can’t see what is behind me, this helps alot
877566
After having this for a year i am glad i got it, its like having a second person to guide me backing up, i really like the motion sensing and all, I definitely feel more confident maneuvering around in tight areas and backing up to my house
James - 09/12/2021
120795
- FCE48TASL-07
by: John04/09/2021
Review from a similar Vision S Wireless in RV Camera System
The installation was fairly easy. The trailer came prepped for the rear camera so, it was attached and linked. The side cameras involved a little work due to being close to the pass-through doors. They went on with a bit of cutting of the trailer skin.
The problem is the right side trailer camera is reading that it's the left side and visa versa for the right. They are both installed correctly, facing back and the pairing button on the bottom.
Also when the two side cameras paired they caused the rear camera to unpair. I re-paired the rear and now the right side ( left camera ) is unpaired.
I've emailed Furrion for answers to my situation.
1006430
Review from a similar Vision S Wireless in RV Camera System
This camera system is a must-have!
I had it installed for me so I can't speak as to ease of install, but they didn't mention any issues.
I have never had an issue with connectivity. My trailer is 21' and there is about 33 feet from the monitor in the truck to the camera on the back. Nighttime view is great (see picture.)
I travel solo and it lets me back up without a spotter and without having to GOAL every foot and a half to see where I am. Knowing where traffic is around me on the road is a a huge safety benefit. It helped me avoid an accident on the freeway last summer. I had just passed a slow moving vehicle and was signaling to go back into the right lane when a low sports car decided to pass that vehicle as well without waiting for me to get back over. It darted around it and went between it and my trailer, cutting them off and passing me on the right. He was completely hidden in all mirrors and windows due to being so low and in my blind spots, but I spotted his movement in the camera and stayed in my lane until he flew past. Another couple seconds and I wouldn't have been able to correct back. If it wasn't for the camera, I believe there would have been an accident.
The hardest thing to get used to is the reverse view. I wish CW had done the step to change mirroring the view. When I see a car on the right in the monitor, I have to remember they are really on the left of my rig. Apparently there is a way to flip this to normal view but I haven't been able to do it yet.
The monitor plugs into the cigarette lighter in the cab of the truck and I purchased a vehicle-specific mount for it from [online store]. I put an XL Scosche magnet on the back of the monitor.And a Scosche magnetic holder on the mount. It holds well through all seasons and is easy to take off when not in use.
I would definitely purchase this again and have recommended it to others.
977160
Review from a similar Vision S Wireless in RV Camera System
the QR code worked for the product but I needed clarification so went to a [online video] site. There I was able to understand the very simple process. I modified the pedestal stand so it would fit in the center depression of my dash board on my 2020 Ram 1500.
The system synced up almost instantly with the camera and once installed in the rear mount was able to secure a very clear rear camera picture.
I can remove the monitor stand and secure it from view when not in use. The tiny screws for the rear camera can be a challenge glad extras were available as I lost two.
1038424
Review from a similar Vision S Wireless in RV Camera System
Bought the Furrion Camera system a year ago and it is truly a great item for monitoring what you're towing. With a 33 foot trailer, It makes lane changing much easier as well as when backing into tight campsites. Item was an easy install on the trailer as well as placement of the monitor within the tow vehicle. Highly recommend this to anyone towing a trailer or another vehicle to monitor what is going on behind you.
751425
Comments
Excellent. Ease to use
Ted B - 02/15/2021
106879
- FOS05TASF
by: Steven08/21/2021
Review from a similar Vision S Wireless in RV Camera System
I love this thing it works great. Some might want to opt for the larger screen. It helps me with depth perception. Way easy to change lanes now. I can quickly see how far back behind the trailer a car is. Also it run off the head light circuit, that’s where you power it from. So you have to tap into those wires. I always drive while towing with the headlights on to give power to the rear running lights and the camera gets that power
1129529
- FOS43TASF
by: Timothy09/21/2021
Review from a similar Vision S Wireless in RV Camera System
works great, it was plug and play my new fifth wheel RV came prewired for this camera system. worked very well for back up camp site and backing the RV into the parking spot at home, also helps keep an eye on those tailgaters while going down the highway
1158513
- FOS43TASF
by: Bradb02/26/2020
Review from a similar Vision S Wireless in RV Camera System
I have the camera on the back of a travel trailer. Having a view of the road behind the trailer is indispensible and I am amazed that they are not legally required. I can also see my bikes on the back rack. The only reason I downgrade it one star is because the suction cup for the monitor in the truck often falls off the windshield.
759129
Comments
Good camera. I gave up on the suction cup and prop the monitor up on the console, which is not ideal. It is almost impossible to see with sunglasses on.
Bradb - 02/27/2021
109296
- FOS07TASF
by: Jimbo W08/12/2020
Review from a similar Vision S Wireless in RV Camera System
I received the correct item that I ordered in a timely manner, intact and in working order. The installation instructions were easy to follow.
The operation Of the system, and picture quality are very representative of the reviews I read online.
I very pleased with both the quality of the product and professionalism of etrailer.
860540
The reason you have power to the lights but not the side cameras on the Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-05 or part # FCE48TASL-07 is a problem with the tow vehicle (2019 Chevrolet Silverado 1500) not the wiring. This is actually a know issue on the new GM trucks since they use an odd trailer lighting circuit system which doesn't produce enough power for the cameras. Therefore, you need to use the 7-Way Vehicle Power Adapter Cable for Furrion RV Observation... view full answer...
I have just want you need to active the backup camera prep package from Furrion, the Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-05 for 5" or the part # FCE48TASL-07 for 7". These systems both come with the main rear camera as well as the two side traffic cameras. In regards to kit components, they all come with the mounts but since you already have these they can just be discarded. I am however not aware of a way to order the kits without them. view full answer...
I have solutions for you, but there won't be any systems that are compatible to allow you to all use the same monitor. For the camera system, I recommend using either the Furrion # FCE48TASL-05 (5" monitor) or # FCE48TASL-07 (7" monitor). These Furrion systems come with the rear backup camera and 2 side marker light cameras to give you a full view of your surroundings on all sides when maneuvering your 2019 Grand Design Reflection; these systems are our most popular and well reviewed systems,... view full answer...
We do have a Furrion camera system that includes side marker lights that will work with your trailer that is pre-wired for the Furrion system. There are a couple of options for you, as you can choose from either a 5 inch or 7 inch monitor:
- 7 Inch Monitor: Furrion Vision S Wireless RV Observation Camera System with Side Marker Light Cameras # FCE48TASL-07
- 5 Inch Monitor: Furrion Vision S Wireless RV Observation Camera System with Side Marker Light Cameras # FCE48TASL-05
This... view full answer...
I have a solution for you, but GM has made it so that only the IntelliHaul Echo Master cameras are wirelessly compatible with their Infotainment systems and we haven't come across any aftermarket wireless observation system for RVs that can be paired with these sytems.
With that being said, there are some bonuses that come along with using a Furrion system like the # FCE48TASL-05 (5" monitor) or # FCE48TASL-07 (7" monitor) which has the rear camera and monitor, as well as side marker... view full answer...
The correct camera system that the Forest River Rockwood Ultra Lite is pre-wired for is the Furrion Vision S Wireless RV Backup Camera System. In order to utilize the two traffic cameras on the side which replace the marker lights you'll need to go with the larger version which have either the 5" or 7" monitors, part # FCE48TASL-05 or part # FCE48TASL-07. These both come with the main camera, two side cameras, monitor and everything else you need to install new or into a pre-existing/pre-wired... view full answer...
The correct Furrion Vision S Wireless RV Backup Camera System for a Keystone Cougar 5th Wheel is part # FCE48TASL-05 for 5" or part # FCE48TASL-07 for 7". In regards to the side cameras, you'd just need to plug in the camera from the kit to the existing lights. view full answer...
For your 2021 Forest River 241QBXL that has the Furrion pre-wiring I would recommend the Furrion kit part # FCE48TASL-05 which includes side cameras for the sides of the trailer so that you can see better when changing lanes. The display that comes with is a bit larger too at 5 inches which helps with visibility as well.
Or if you weren't interested in the side cameras we have this kit without them with part # FOS05TASF. The part # FOS43TASF is the most cost effective solution that has... view full answer...
Yes, the Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-05 will work perfectly with the Furrion Camera Mounting Bracket FRCBKT-BL on a 2019 Forest River Wildcat 34WB. It offers plug-n-play installation for the main camera so all you need to do is transfer the new camera to the old camera mounting bracket. view full answer...
Yes the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 that you referenced would work great on your 2020 Grand Design Reflection 303RLS. This would work great installed on a trailer that has LED trailer taillights like you have. view full answer...
For your 2020 Keystone Laredo 298srl, the factory mount and wiring is a fit for the Furrion Vision S systems. The Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen # FCE48TASL-05 you asked from is a great option.
I've linked the page to all your options that are directly compatible. view full answer...
The Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 would be a great addition to you 2019 Winnebago Minnie Drop 170k.
To know for sure if you will have enough space to mount the side view cameras between the OEM marker light wiring hole and the side storage door you will need to make sure that the distance from the center of OEM wiring hole to the closest edge of the side storage door is at least 5 1/2" which will leave you roughly... view full answer...
There could be a couple of things going on here, but the Furrion Vision S Wireless Camera System has pretty good reception and shouldn't be any connection issues within 100m / 300ft (system actually has a wireless range of up to 150m / 450ft). I would first start by making sure that the camera is receiving power- the red LED light on the camera should be on to give this indication. Once the camera is powered on, you'll want to hold down the camera pairing button on the bottom of the camera... view full answer...
I have a few things for you to check right off the bat for your Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05. First make sure that you have the correct camera selected on your monitor, and then also make sure that your side marker camera has power running to it. Most of the time people connect these to the running light circuit so that they're easy to turn on and off, but if these are connected to the running light circuit then you need... view full answer...
It sounds like the camera may have lost it's pair to the display monitor. If press the pair button on the bottom of the camera for 2 seconds it should pair to the monitor. If you are not able to get it to pair I would contact the dealership that installed it because some of the wiring may have come loose. view full answer...
In order to use the Furrion Vision S # FCE48TASL-05 as an observation system it must be wired directly to a 12v battery or the converter in your coach, instead of relying on the power from the circuits the different lights are on. You will want to use an in-line switch on the power cable to power on or off your camera. This will enable this cameras to be used when parked, without a tow vehicle connected.
You can use something like the Buyers Products # 3376391101 as the switch during... view full answer...
Your 2019 Coachmen Viking 17FB is prewired for a Furrion Vision S system. I recommend going with a 3 camera system so that it's easier to see around your trailer while you're traveling. The kit comes with a 5" monitor as part # FCE48TASL-05 or a 7" monitor as part # FCE48TASL-07.
The 7" version is also available with the rear camera combined with a brake light, as part # FR94FR, if you'd rather go that route.
We've heard some pretty good things about the Vision S system so I recommend... view full answer...
You won't be able to use the bracket on your pre-wired housing, but that is easily removed and will allow you to use the Furrion # FCE48TASL-05 system. You'll simply remove the bracket (the new rear camera comes with a mounting plate to replace your old one) and use the wiring to wire in your new camera from the # FCE48TASL-05 system and you're in business! I really love that this package includes the side marker light kit to added field of vision, which is especially helpful in eliminating... view full answer...
The Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-05 will accept up to four different camera inputs so you have one slot left to use on the tow vehicle. For this, you will need to use the Furrion Vision S Wireless RV Backup Camera part # FCN48TASF. That said, mounting the Furrion Vision S Wireless RV Backup Camera will be up to you as they don't offer any other bracket for this. I recommend either attaching the camera to a licence plate frame or directly to the... view full answer...
For a three camera setup for your 2019 Jayflight that was prepped for Furrion Vision S observation systems you have two really great options with only difference being the size of the monitor that comes with either. We have the 7 inch monitor version with part # FCE48TASL-07 and we have the 5 inch version part # FCE48TASL-05. view full answer...
Yes, that is correct, if you do not have the factory prep package for the Furrion Vision S, # FCE48TASL-05, you will need to drill the mounting holes yourself and run the wiring.
I have attached an installation video to assist. view full answer...
Disconnect power to camera and monitor components of your Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 for several minutes to completely power down, then reconnect and power up. Next, press and hold the button on the bottom of the camera for at least 2 to 3 seconds. The camera should then be ready to pair to the monitor. view full answer...
The Furrion Vision S # FCE48TASL-05 is typically powered from the tow vehicles indicator light circuit. However, you can use the Furrion Vision S # FCE48TASL-05 as an observation system if wired directly to a 12v battery or the converter in your RV. You will want to use an in-line switch on the power cable to power on or off your camera; this will enable cameras to be used when parked, without a tow vehicle connected. The Buyers Products, # 3376391101 can be used as the switch to allow... view full answer...
The 5" and 7" monitors on the Furrion RV back up cameras systems like the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen Item # FCE48TASL-05 can sync up to four cameras at once so you can place one camera on four different trailers and use the same monitor. view full answer...
We've found that the wireless signal reception of the Furrion Vision S systems like the part # FCE48TASL-05 is by far the best compared to other camera setups and it would easily handle the length of your 39 foot camper. view full answer...
Yes, you can fit the Furrion Vision S Wireless RV Observation Camera System, # FCE48TASL-05 to your 2022 inTech Sol Horizon Rover. While some RV OEM's have begun releasing their RV's from the factory with pre-wired mounts for back up cameras I am not aware of Sol doing so with the inTech. There will most likely be a need to drill hole(s) for mounting the back camera of this system. If you are hesitant about drilling holes in your new camper then yes, I suggest having this done by a professional... view full answer...
Your 2020 Grand Design Solitude is pre-wired for the Furrion Vision S Backup Camera system with night vision # FOS43TASF that comes with a 5" display screen. You could also use Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 as well which is the same system but it comes with blind spot side marker lights with built in cameras.
If you would like a larger screen I recommend # FOS07TASF or the camera with the 7" display screen. This system... view full answer...
For your 2021 Keystone Cougar 31MBS that is pre-wired for the Furrion Observation system like the 4.3" Screen part # FOS43TASF. There is also the slightly larger Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras part # FCE48TASL-05. If you would like side cameras, I recommend Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras part # FCE48TASL-07 which comes with a 7" screen. This is very simple plug and play install. view full answer...
For your 2020 Grand Design Solitude 310GK that is pre-wired for a Furrion observation system we have the Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 which would be all that you'd need. It comes with the rear and side cameras as well as a 5 inch display that allows you to easily view the cameras and select the different views as needed. view full answer...
Thanks for the info! We have exactly what your friend needs for their 2020 Freedom Express Ultra Lite.
The part numbers you are referencing belong to the predeccessor to the Furrion Vision S backup camera system but the Vision S system will still work regardless. The FOS48TA-BL was the 4.3" monitor so the exact equivalent to the parts you mentioned would be the kit # FOS43TASF. This comes with both the monitor and the camera so that's all they would need.
It is worth noting that the... view full answer...
Highest quality rv camera system for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.
Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
Most detailed, accurate rv camera system information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.
Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.