View Cart

Jeep Cherokee Vehicle Tow Bar Wiring

Select Vehicle Year

  
Vehicle Tow Bar Wiring

Available Years for Jeep Cherokee Vehicle Tow Bar Wiring



What our customers are saying:

Very quick turn around time. Thanks.

Waynne

Harahan, LA


Search For Custom Fit Jeep Cherokee Accessories
Select A Category Below



Jeep Cherokee Tow Bar Wiring Videos

Best 2018 Jeep Cherokee Flat Tow Setup Options - Wiring

Shane: Hi, I'm Shane with etrailer.com. Today we're going to be going over our the best flat tow setup for your Jeep Cherokee. For those of you that don't know what flat towing a vehicle is, it's going to be basically how we have it set up here. It allows you to bring your vehicle with you. Whenever you're going to camping or whatever destination you're going to, you're not going to have to worry about taking your RV, tearing it down and taking it to the store. Wherever you can get where you want, set your RV up and you can leave it sit.



Best 2017 Jeep Cherokee Flat Tow Setup Options - Wiring

Shane: Hi, I'm Shane with etrailer.com. Today we're going to be going over our the best flat tow setup for your Jeep Cherokee. For those of you that don't know what flat towing a vehicle is, it's going to be basically how we have it set up here. It allows you to bring your vehicle with you. Whenever you're going to camping or whatever destination you're going to, you're not going to have to worry about taking your RV, tearing it down and taking it to the store. Wherever you can get where you want, set your RV up and you can leave it sit.



Best 2016 Jeep Cherokee Flat Tow Setup Options - Wiring

Shane: Hi, I'm Shane with etrailer.com. Today we're going to be going over our the best flat tow setup for your Jeep Cherokee. For those of you that don't know what flat towing a vehicle is, it's going to be basically how we have it set up here. It allows you to bring your vehicle with you. Whenever you're going to camping or whatever destination you're going to, you're not going to have to worry about taking your RV, tearing it down and taking it to the store. Wherever you can get where you want, set your RV up and you can leave it sit.



Best 2015 Jeep Cherokee Flat Tow Setup Options - Wiring

Shane: Hi, I'm Shane with etrailer.com. Today we're going to be going over our the best flat tow setup for your Jeep Cherokee. For those of you that don't know what flat towing a vehicle is, it's going to be basically how we have it set up here. It allows you to bring your vehicle with you. Whenever you're going to camping or whatever destination you're going to, you're not going to have to worry about taking your RV, tearing it down and taking it to the store. Wherever you can get where you want, set your RV up and you can leave it sit.



Best 2014 Jeep Cherokee Flat Tow Setup Options - Wiring

Shane: Hi, I'm Shane with etrailer.com. Today we're going to be going over our the best flat tow setup for your Jeep Cherokee. For those of you that don't know what flat towing a vehicle is, it's going to be basically how we have it set up here. It allows you to bring your vehicle with you. Whenever you're going to camping or whatever destination you're going to, you're not going to have to worry about taking your RV, tearing it down and taking it to the store. Wherever you can get where you want, set your RV up and you can leave it sit.



Tow Ready Tail Light Isolating Diode System Installation - 2019 Jeep Cherokee

Speaker 1: Today, on this 2019 Jeep Cherokee, we'll be having a look at and showing you how to install the Tow Ready Tail Light Isolating Diode System with a Four-Pole Connector, part number TR118821.Now, in conjunction with our diode wiring harness, we also use a Roadmaster 7 to 6 Coil Kit. That'll give us the six-way connector that we have on the front of our vehicle, and give us a seven to six-way coil cord. We'll have the six-way end going into the front of the Cherokee, and the seven-way on our motor home.This is great because not only can you run your turn signals, your brake lights and your tail lights, but you can also run a charge line kit to charge your vehicle's battery. If you have a braking system with an indicator light on it, inside the motor home, you can run the indicator light wire through the six-way connector, through one of the unused terminals, and run that as well. You can have all those functions at the same time.Now, our six-way connector is great because we have this nice spring-loaded door on it which not only will protect it from the elements when it's not in use, but it'll also help hold our wiring plug in place when we are flat towing our Cherokee. We can easily remove the coiled end just by using the two finger hooks here and pulling out.



Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2019 Jeep Cherokee

Speaker 1: Today on in 2019 Jeep Cherokee, you're going to be taking a look at . I'm going to show you how to install the Roadmaster diode seven wire to six wire flex coil wiring kit, part number RM-15267.This is what our diode kit's gonna look like when it's installed. It's going to be one of five main components and a flat tow setup. The other four, you're going to be your base plate, safety cables, tow bar and your braking system.What the diode kit is going to do for you, it's going to allow you to transfer your light signals from your rv through your Jeep Cherokee so you can safely flat tow it. This diode's going to have an aluminum casing on it that's going to protect it from rust and corrosion. And it's going to tie into your factory tail light wiring.As far as our plug goes here in the front, it's going to be a six pole plug.



Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2018 Jeep Cherokee

Speaker 1: Today on our 2018 Jeep Cherokee, we're gonna take a look at and show you how to install the Roadmaster 7-wire to 6-wire Flexo-Coil Diode Wiring Kit for towed vehicles. Part number is RM-15267.Now this wiring kit's gonna be the perfect solution for towing your vehicle behind your motor home, and having the appropriate signals on the back. We've got our Flexo-Coil here, passes those signals through so whether we're hitting the brakes in our Coach, we have on our running lights or our turn signals, that's gonna show up on the back of the vehicle. The Flexo-Coil design will expand and contract as you can see, so we won't have to worry about it hanging down on the ground, but as we make our initial pull away from our vehicle when it's connected, it's gonna extend to the exact length that we need.Now the benefit of a wiring system that has diodes included will be that those are gonna isolate our RV from our vehicle so we won't have any type of back feeding. We can take a closer look at them now.So now what we've been able to do using our diode is take the signal from our RV, it comes in here, and the factory signal from our vehicle. That is then going to be converted to a single output, so whether the signal comes from the RV, it's allowed to pass directly through and go out and light our bulb.



Roadmaster 4-Diode Universal Wiring Kit Installation - 2018 Jeep Cherokee

Speaker 1: Today on our 2018 Jeep Cherokee, we're going to be installing Roadmaster's Four Diode Universal Wiring Kit for Towed Vehicles. Part number RM-152-98146-7. This diode kit is going to allow your RV to send its brake, turn, and tail lamp signals to the lights on your vehicle.This will allow vehicles behind you to know what you're about to do, and will keep you in compliance with local laws.Here we are in our RV, and all of our signaling devices are going to activate back on our vehicle. It activates our left turn on both the RV and on our vehicle. The same happens with our right turn, our break lamps, and our tail lamps.Along with this diode kit, it's gonna come with a six pole connector and a cable that goes from six pole to seven pole so you can hook it to your RV. This is great not only for the diode kit and getting your signaling devices, but it acts as an interface that will connect your RV to your vehicle or other systems, such as a breaking system or any other signaling you may want to provide your vehicle.This diode and wiring kit connects to the tail lamp circuits here at the back of your vehicle.



Hopkins Custom Tail Light Wiring Kit Installation - 2017 Jeep Cherokee

Speaker 1: Today on our 2017 Jeep Cherokee, we're going to be taking a look at and showing you how to install the Hopkins custom taillight wiring kit for towed vehicles, part number HM56208. So here's what our wiring looks like once we have it installed. Do want to mention we chose to put a different style connector in the four pole flat, which is sold separately. What this is going to allow us to do is it's going to allow us to accept our RV's taillight signals, brake and turn signals and use them in conjunction with our vehicles taillights without having to worry about putting the magnetic lights on our vehicle.What you're really going to like about our wiring is that it's a custom fit for our vehicle, so we're not going to have to cut or splice into our factory wiring it's going to be a simple plug and play installation with a couple T connectors that are going to go in behind our taillights. As well as having a diode pack that's going to protect our vehicles wiring in case of any problems that may arise or a short circuits from the motor home. Now that we've gone over some of the features and seen what it looks like, show you how to get it installed.To begin our installation, we're going to open up our hatch.



Roadmaster Universal Diode Wiring Kit Installation - 2017 Jeep Cherokee

Today on our 2017 Jeep Cherokee we're gonna be taking a look at and showing you how to install the Roadmaster Universal High Powered Diode Wiring Kit, part number RM-152. In our case, we're also gonna be using the Roadmaster 7 Wire to 6 Wire Flexco Coil Kit, part number RM-146-7. Now our Roadmaster Diode Kit is gonna allow us to use our RV's tail lights, brake lights, and turn signals on our vehicle so that we can flat tow it safely down the road. To begin our installation we're gonna start on our passenger side here and we're gonna need to remove the two fasteners holding our tail light in place. Now I'm gonna be using a T30 torque bit to remove this. Now we're just gonna kind of give our tail light a good wiggle around to loosen it up a little bit. Then we're gonna pull straight back, which will release these tabs that are holding it in place. Now I'm gonna disconnect my socket from my tail light. There's gonna be a little button right here.



Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2017 Jeep Cherokee

Today, on our 2017 Jeep Cherokee, we're gonna be taking a look at showing you how to install the Roadmaster Diode Seven Wire to Six Wire Flexo Coil Wiring Kit, part number RM-15267. Now, our Roadmaster diode kit, it's gonna allow us to use our RV's taillights, brake lights, and turn signals on our vehicle so that we can flat tow it safely down the road. To begin our installation, we're gonna start on our passenger side here, and we're gonna need to remove the two fasteners holding our taillight in place. Now, I'm gonna be using a T30 Torx Bit to remove those . Now we're just gonna kinda give our tail light a good wiggle around to loosen it up a little bit, and then we're gonna pull straight back. Let's release these tabs that are holding it in place. Now, I'm gonna disconnect my socket from my taillight.



Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2016 Jeep Cherokee

Today on our 2016 Jeep Cherokee we're going to show you how to install the Roadmaster Flexo Coil Diode Wiring Kit for a seven pole to six pole connection. Part number is RM15267. The first thing I'm going to do is take my six pole plug, I'm going to take the provided screws here. I'm going to attach that plug right to the bracket. Once that's attached we'll pull the boot off the back, and we want to slide our wiring through the boot. Now, in typical applications here you're just going to have the four wires.







Roadmaster Tow Bar Wiring Kit Installation - 2015 Jeep Cherokee

Today on this 2015 Jeep Cherokee, we're going to show you part number RN-154. This is the Roadmaster Universal High-Powered Diode Wiring Kit. We'll go ahead and cover the parts that come in the kit. You get the 4 high-powered diodes with the terminals. These are crimp terminals, and also some butt connectors for your wires. This is a patch cord to go between your RV and your towed vehicle. This is the wire harness that gets installed on the vehicle.



Roadmaster Tow Bar Wiring Kit Installation - 1997 Jeep Cherokee

Today on our 1997 Jeep Cherokee, we'll be installing the Road Master Base Plate Wiring Kit, Part RM-154. To start off, we'll want end of our Road Master wiring harness through the hole in the front bumper on the driver's side. We'll use a zip tie to secure it and cut off any excess. We'll cut one of the ends of our wiring, since we'll only need one. We'll then run the cut end of the wiring up through the bumper and into the engine compartment. To make it easier, we'll use a pull wire. In this case, we're using old airline tubing. It also could be any piece of wiring that holds it's shape as well, to pull up our new wire. We'll use the airline tubing, which we'll run down through the engine compartment and out the bottom.



Roadmaster Tow Bar Wiring Kit Installation - 2014 Jeep Cherokee

Today, on a 2014 Jeep Cherokee, we're going to install part number RM-154. This is the Roadmaster Universal Hy-Power Diode Wiring Kit. Before we do any work, want to make sure that the key is in the off position. The electronics in this vehicle are so sensitive that if you disconnect the tail lights, it could cause the computer to malfunction.Let's go ahead and open up the back hatch. Here are two fasteners that we have to remove to take off the tail light. We'll use a T30 torque bit to remove the fasteners.





Jeep Cherokee Tow Bar Wiring Questions and Answers