2016 Jeep Cherokee Vehicle Tow Bar Wiring

Features:

This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent damage from electrical feedback. Connects RV and towed car with 4-pole flat plugs. Includes installation hardware.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

This LED light bar plugs right into your 12V outlet and needs no hardwiring, while the transmitter plugs into your RV's 7-way socket. Uses a suction cup to attach to your car's back window.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

This wiring kit carries brake and turn signals from your motorhome to your towed car while you're flat towing. Diodes protect your car from damage from electrical feedback.

Installation Notes:

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

This LED light bar is completely wireless, receiving brake and turn signals from a transmitter plugged into your vehicle's 7-way round. It runs on a rechargeable battery. Weatherproof and super durable, it mounts securely with heavy-duty magnets.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 4-wire Flexo-Coil electrical cord.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Heavy-duty kit gets you tow lights that will last for the long haul, with rubber-coated housing, powerful magnetic bases, and a robust wiring harness. Displays brake and turn signals on your trailer or towed car. Comes with a handy carrying case.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Stick these heavy-duty magnetic lights on the back of your car and they'll stay there. Nice and secure, these are also the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Plug-and-play custom harness gets turn and brake signals on your towed car with no hardwiring or splicing, and no effect on your warranty. The built-in diodes protect your car from electrical feedback.

Installation Notes:

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Stick these magnetic lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Stick these bright, efficient LED lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Stick these bright, efficient LED lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

This LED light bar is completely wireless, receiving brake and turn signals from a transmitter plugged into your vehicle's 4-pin round. It runs on a rechargeable battery. Weatherproof and super durable, it mounts securely with heavy-duty magnets.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Get convenient magnetic tow lights without the endless wires. These bright, efficient LED lights have a wireless transmitter and run on AA batteries. It's an easy way to get brake and turn signals on your towed car, trailer, or cargo carrier.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent damage from electrical feedback. Includes 7-way to 6-way coiled adapter cord and 6-way socket.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way adapter cable and 6-way car-side socket.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Easily plug this custom harness into your towed car to get the turn and brake signals you need for flat towing. Unlike other kits out there, this harness protects your vehicle from electrical feedback without you needing to splice in extra diodes.

Installation Notes:

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.