Replace a worn or missing cap on your Dexter Vortex 6-lug hub to keep grease in and road grime out. This threaded Vortex grease cap fits 2,500-lb Vortex idler 6-lug hubs and hub/rotors. ... Features: Replaces one grease cap on Dexter Vortex trailer hubs Helps keep grease in and contaminants out Threaded design makes removal and installation easier than drive-in caps Fits 2,500-lb Vortex idler 6-lug hubs and hub/rotors Specs: Quantity: 1 cap with O-rings Outer diameter: 2.44" Thread diameter: 2.82"
Cap assemblies replace the grease caps on your Dexter or Tie Down Vortex trailer hubs. Includes 2 threaded caps that fit 2,500-lb to 4,200-lb hubs.Features: Replaces the grease caps on your Tie Down (or Dexter) Vortex trailer hubs Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Quantity: 2 caps
Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Includes 1 threaded cap that fits 2,500-lb to 4,200-lb hubs.Trailer Highlights Cap Assembly Replacement: Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Hub Compatibility: Fits 2,500-lb to 4,200-lb hubs. Specs Application: Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Fits Vortex K71-G01-73 (81143) 21-261 Thread and Seal Details: 2 5/16-11 Threads with Viton O-ring Weight: .244 lbs.
Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Includes 1 threaded cap that fits 2,500-lb to 4,200-lb hubs.Highlights Cap Assembly Replacement: Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Hub Compatibility: Fits 2,500-lb to 4,200-lb hubs. Specs Application: Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Fits Vortex K71-G01-73 (81143) 21-261 Thread and Seal Details: 2 5/16-11 Threads with Viton O-ring Weight: .244 lbs.
Time and miles catch up with every trailer. When you get corrosion or damage at the hub you want a replacement that matches your spindle. This galvanized idler hub fits 6,000-lb #42 spindles used with threaded Vortex setups. ... This hub is built specifically for 6,000-lb axles with #42 spindles that originally used a threaded Vortex oil bath hub. Standard hubs will not fit that spindle correctly.
Time and miles catch up with every trailer. When you get corrosion or damage at the hub you want a replacement that matches your spindle. This galvanized idler hub fits 3,500-lb #84 spindles used with threaded Vortex setups. ... This hub is built specifically for 3,500-lb axles with #84 spindles that originally used a threaded Vortex oil bath hub. Standard hubs will not fit that spindle correctly.
Hey Mario, thanks for reaching out! Congrats on your new purchase of the Ultimate Trailer Jack #322-RDJ-2K! There aren't any adapter mounts to make this so it mounts on the bracket you're pointing out in your photo, so if you want a jack to…
The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…
If you are dealing with a single axle and the 4-Leaf Double-Eye Spring #e97SR I recommend either the standard Kit #K71-403-00 or Wet Bolt Kit #K71-358-00 which will give you new bolts, nuts and shackle straps. The U-Bolt Kit #CE23002 is a great…
Leaf springs flatten out over time, so since yours are 25-1/2" center to center, you'll want to go with ones a little shorter than that: - 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long - Dacromet #e93SR The #e93SR…
If your trailer has a GVWR of 3,750lbs and your boat only weighs 1,460lbs you should be fine with the 3,500LB Leaf Springs #e54SR. I would recommend taking your boat and trailer to a nearby scale to have the trailer weighed to ensure you are under…
Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…
There may be a way to get the Rear View Safety Backup Camera System #RVS-062710 to work if you have enough wire. To wire these cameras properly you're going to need to connect the red to power, the yellow to the left turn signal, the brown to the…
Yes, you can! The DeeMaxx Rotors like the item #DE47VR are capable of being swapped out for Kodiak brake rotors. They are compatible with their calipers.
It sounds like you are needing the Replacement Black Plastic Filler Cap #T097-022-00 for your UFP surge actuator. I have included an image below showing the dimensions for the cap so you can verify fitment on your actuator.
The Vault style of hub/cap is very similar to the Bearing Buddy setup which we carry. Since the Kodiak Disc Brake Kit #K2R35S is a slip-on style of rotor it would simply fit right onto the idler hubs you have now and your Vault system would be…
The replacement for the Curt s0601u-r1 powered circuit protected taillight converter is Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part #C59236. This is an universal wiring harness that requires splicing into the vehicle…
Oil leaked, water got in, and the bearings are shot on your 7,000-lb #42 spindle. Not every hub will fit on that setup. This galvanized idler hub is built to replace threaded Dexter Vortex oil bath hubs, restoring function without changing the axle.Features to know about Threaded Replacement for Dexter VortexHubs A failed oil bath hub leaves you with a spindle that standard hubs will not fit. This idler hub uses a compatible pilot design built to replace Dexter Vortexhubs and fits 7,000-lb axles with #42 spindles.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5.2K and 6K Dexter E-Z Lube and etrailer Easy Grease axles. ... E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 5,200-lb and 6,000-lb axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 2.446" Weight capacity: 3,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.Features: Marine-grade trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Galvanized finish offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Round trailer axle beam measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Hub is designed for use on trailer idler axles. Fits 3.5K E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle or etrailer Easy Grease to make lubricating bearings quick and easy.
Marine-grade hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. ... Features: Marine-grade trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Sturdy iron construction Galvanized finish offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer QAI and CSA certified Specs: Application: 3,500-lb trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 17-1/2" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 14" to 15" Bolt pattern: 5 on 5" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 3,500-lb trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.Features: Marine-grade trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Galvanized finish offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer QAI and CSA certified Specs: Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BTR spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 10" to 12" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.99" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Galvanized hub-and-drum assembly is ideal for marine use. For electric or hydraulic brakes. Fits 3.5K E-Z Lube and Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. ... Features: Marine-grade trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Sturdy iron construction Galvanized finish offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer QAI and CSA certified Specs: Application: 2,000-lb trailer axles with BTR spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 10" to 12" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. ... Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Large hub flange allows for use with larger wheels Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 2,000-lb trailer axles with BTR spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Hub diameter: 6.25" Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Filters
