Need a complete lighting setup for your trailer? This kit includes everything required for trailers under 80" wide, making it easy to get fully equipped and compliant. ... Features: Trailerlight kit designed to provide complete lighting for trailers under 80" wide Includes tail lights, side marker lights, wiring harness, and license bracket Provides all required lighting and reflectors for DOT compliance 20&' Trailer harness allows full trailer connection License bracket made of corrosion-free black plastic that flexes on impact Mounting hardware and installation instructions included Easy installation for complete setup Includes 1 complete trailerlight kit Specs: Application: Trailers under 80" wide Tail light dimensions: 4-3/4" x 4-1/2" Harness length: 20' Light colors: Red, white, amber
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". ... Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailerlights.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailerlights.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Highlights Simple Setup: Plug the transmitter into your vehicles 4-way to send signals wirelessly. Battery Powered: Lamps run on batteries, so no wiring to the trailer is needed. Mounts Fast: Strong magnetic bases stick securely to any trailer or towed vehicle. All Signal Functions: Stop, turn, and tail lights provide everything you need for towing.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts to the surface of the trailer with the built-in flange, and hardwires to trailer.Features: Halo tail light is bright and easy to see, day or night Outer band functions as tail light Center flashes for turn signal Both brightens for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount with built-in flange Hardware not included 3-Wire pigtail hardwires into trailer Black wire for tail light Red wire for brake and turn signal White wire for ground DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" out from trailer Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Brake/turn signal light: 0.59 amps Lifetime warranty on LEDs
Welcome back Adam. I can indeed tell you what gooseneck adapter you'll need for your 5th wheel trailer but I'll need the information on the sticker that's attached to the bracket above your current pin box. The white sticker should say…
Hey Jennings! We don’t currently carry any 2-way propane/AC combo models like your old Norcold, so if you want to go that route you will have to look around elsewhere and match up whatever you find to your existing cutout. For a 12V I recommend one…
Hey Kathryn, what specifically on the Blue Ox Alpha are you needing to replace? Unlike Roadmaster they don't have as many replacement parts but you can contact them about getting yours rebuilt but that's just not something we can help with.…
Hey Jeff, thanks for reaching out. I just went out to our warehouse and measured the P&F Products J-Channel Rail for Enclosed Trailers #PF26FR. The interior dimension of the J-channel I measured at 0.17". What thickness plexiglass were you…
Hey Uriah, thanks for reaching out! The Tradesman Vaquero Self-Contained Hydraulic A-Frame Trailer Jack #ST86FR will work best if it's hardwired to a battery on your trailer, but you can also hardwire a 7-Way plug and lead like part #H20043 and…
Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…
Hey Clay, if the bolt pattern of your boat trailer does not match what is on the Demco actuator part #DM8104311 you have the option to redrill holes on the trailer to match the actuator or you can have the actuator welded to the trailer. I'd…
Hey Chan, the Shocker Hitch part #SHK29YR will not have nearly the same turning clearance as a Turning Point pin box since the pivot point is fixed and not turning like the Turning Point. So if you are looking for more turning clearance than what you…
Hey Jason, great question - the Keystone Cougar line almost always uses a Lippert 1621 pin box, which puts you in the territory for the Gen-Y Nomad #GY57ND. That model is built to bolt directly to the 1621/1116/1716 bolt patterns without any adapters…
Ron, yes, the Nomad still uses the same bolt-hole rows your factory pin box uses, so whatever height options your original 1621/1116/1716/Rhino box had will be the same ones available with the Nomad #GY57ND. It’s a bolt-for-bolt replacement, so Gen-Y…
Hey Dave, Usually, trailer tires are not balanced with weights like car tires because if the trailer weight changes it can cause the weights to vibrate off. So what trailer tire and wheel manufacturers will do is line up the heavy spot in the wheel…
12-5/8" Long x 1" tall. Waterproof trailerlight serves 3 functions: brake, tail, turn. Low-profile light fits in tight spaces. Smoked lens works great with black-out style on vehicles or trailers. 3-Wire pigtail. 9 LEDs. ... Features: Oblong trailer tail light serves 3 functions Stop light Tail light Turn signal light Smoked lens works great with blacked-out style on vehicles or trailers Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Mounts on surface with built-in black flange - hardware not included 3-Wire pigtail DOT compliant Specs: Overall dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Weight:.44 lbs Diodes: 9 Voltage: 12V Amp draw: Tail: 0.01A Stop: 0.2A Lifetime LED warranty
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts with the built-in flange and comes with a 3-prong plug for quick installation.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Recessed mount with built-in flange Hardware not included 3-Prong plug connects to trailer DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" from trailer Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?
6-1/2" x 2-3/8" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Surface-Mount Light Surface-mount trailerlights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailerlight serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailerlight serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
This long, thin tail light fits in those tight spaces on your trailer or truck where you couldn't fit anything else. It mounts on the surface and wires to your trailer with the included 3-wire pigtail.Features: Thinline Series light fits in tight spaces GloLight tail light is bright and easy to see, day or night Bar glows for tail light Center LEDs light up for brake light and flash for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount Hardware not included 3-wire pigtail wires to trailer Black wire for tail light Red wire for brake and turn signal White wire with #10 ring terminal for ground DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 17" long x 1-3/8" tall x 1" thick Mounting holes: 16-1/8" apart on center Pigtail harness length: 7" Diodes: 28 Power draw at 12.8 volts: Stop/turn signal light: 0.634 amps Tail light: 0.445 amps Lifetime LED warranty
15-9/16" L x 1-3/16" W x 1-5/16" D; Three separate lights on the base; lights have replaceable lenses and bulbs; surface mount on 6-1/8" centers; 1-wire; total of 3 incandescent bulbsFeatures: Red light strip functions as identification light bar for trailers more than 80" wide Light bar has three replaceable MC68RB lights attached to base Each separate light features a replaceable lens and easy-to-replace bulb (A193) White metal housing is sturdy and durable to withstand the environment Surface mounts on 6-1/8" centers Single-wire design includes lead wire and grounds through mounting hardware Dimensions: 15-9/16" L x 1-3/16" W x 1-5/16" D Power draw at 12.8 volts: 1.0 amp A three-light identification light bar for trailer applications more than 80" wide.
This red and white GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts in a cutout using a grommet (sold separately). Works with 3-prong plugs.How to Mount the GloLight This light installs in a grommet (A70GB - sold separately) and requires cutting a hole into your trailer if it doesn't already have one.
2" Diameter. Waterproof, LED trailerlight serves as a side marker or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). ... Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A54GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brake light. Mounts with built-in flange and works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal and brightens for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Surface mount with built-in flange Hardware not included PL-3 connector works with 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 5-1/2" diameter x 1-1/2" thick Light face diameter: 4" Requires 4-1/2" hole in trailer for flange to sit flush Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs What Wiring Do I Need?
4-1/4" Round. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... Features: Round backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights is installed (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible GloLight Series features a brighter outer ring of light with a smooth appearance LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Light fits into a 4-1/2" diameter hole Accepts industry-standard 2-prong plug (sold separately) DOT compliant Meets FMVSS 108 requirements Specs: Dimensions: 4-1/4" diameter x 2-3/16" deep Diodes: 21 Power draw at 12.8 volts: 0.425 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Triangular LED Trailer Clearance and Side Marker Light or Truck Cab Light, 15-Diode - Amber This rounded, triangular LED light can be used as a clearance or cab light.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a parking light and the center LEDs are a turn signal and brake light. Mounts in a cutout using a grommet (sold separately) and works with 3-prong plugs.How to Mount the GloLight This light installs in a grommet (A70GB - sold separately) and requires cutting a hole into your trailer if it doesn't already have one.
2-1/2" Diameter. Waterproof, LED trailerlight serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). 2-Wire pigtail. ... Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A56GB, A56GB or A57GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
6-1/2" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts in a cutout using a grommet (sold separately) and has a weathertight connector.How to Mount the GloLight This light installs in a grommet (A70GB - sold separately) and requires cutting a hole into your trailer if it doesn't already have one.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brake light. Mounts with built-in flange. Designed with weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal and brightens for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with built-in flange Hardware not included Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 5-1/2" diameter x 1-1/2" thick Light face diameter: 4-5/16" Requires 4-1/2" cutout Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs Weathertight Wiring Connection This GloLight has a weathertight plug that's designed to block out moisture.
Filters
